Skip to the content
2 layers20 × 60 mmLED driver, the printed circuit board in 3D

Open hardware project of the LED driver for trench flashlight, created for the needs of Ukrainian volunteers

Size
20 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
9
Pads
39
Tracks, vias
61, 20
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
11 Aug 2026
Updated
27 Aug 2026

Overview

LED driver is an open-source printed circuit board by PetroShevchenko, from the PetroShevchenko/LED_driver repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 20 × 60 mm with 16 parts on 9 nets, routed with 61 tracks and 20 vias.

It is built around the SS34. Its parts include 5 diodes, 4 resistors, 2 capacitors, 1 IC and 1 connector.

Main components

1

README

README.md

LED Driver

Open hardware project of the LED driver for trench flashlight, created for the needs of Ukrainian volunteers.

The driver provides stabilized current for powerful LEDs (1 W) and is designed to be powered by one Li-Ion battery (18650 or compatible).


Purpose

This board is one of the modules of the trench flashlight project.

Main tasks:

  • powering powerful LEDs from one Li-Ion battery;
  • current stabilization regardless of battery voltage;
  • high conversion efficiency;
  • simple design and low cost;
  • possibility of manufacturing at any PCB production.

The project is distributed as Open Hardware.

3D case model

https://makerworld.com/models/1538391

Revisions

Rev.  A

  • board 20 × 60 mm;
  • 2 × RED LED;
  • 2 × WHITE LED;
  • the board is a mechanical base for the LEDs.

Rev.  B

  • 20 × 30 mm board;
  • only RED LEDs are mounted on the PCB;
  • WHITE LEDs are connected by wires to two contact pads;
  • smaller area and lower cost.

Panelization

Script

bash
chmod +x make_panel.sh
./make_panel.sh

KiKit

bash
kikit panelize \
--preset led_driver_panel_jlcpcb.json \
LED_driver.kicad_pcb \
panel/LED_driver_panel_5x1.kicad_pcb

or via:

PCB Editor → Tools → KiKit → Panelize PCB

Panel parameters:

  • 5 boards in a row;
  • V-score;
  • technological rails;
  • 100 × 70 mm.

Recommended PCB parameters

  • 2 Layers
  • FR4
  • 1.6 mm
  • 1 oz Copper
  • HASL Lead Free

License

This project is distributed under CERN-OHL-S-2.0 license. LICENSE file contains license terms.

Parts

16
QtyValueFootprintReferences
210RResistor_SMD:R_1206_3216MetricR2, R3
210uFCapacitor_SMD:C_0805_2012MetricC1, C2
2REDLED_SMD:LED_1W_3W_R8D4, D5
2WHITELED_SMD:LED_1W_3W_R8D1, D2
10.47R 1%Resistor_SMD:R_1206_3216MetricR4
1100kResistor_SMD:R_1206_3216MetricR1
12R2LED_driver:CD43L1
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1
1LOGOLED_driver:TridentG***
1PAM2803Package_TO_SOT_SMD:SOT-23-6U1
1SS34Diode_SMD:D_SMAD3

The 15 most common of 16 parts.

More from PetroShevchenko/LED_driver

4
  • 2 layers106 × 136 mmLED driver panel 5x4, the printed circuit board in 3D

    LED driver panel 5x4

    PetroShevchenko/LED_driver

    Open hardware project of the LED driver for trench flashlight, created for the needs of Ukrainian volunteers

    300 partsCERN-OHL-S-2.0
  • 2 layers106 × 76 mmLED driver panel 5x2, the printed circuit board in 3D

    LED driver panel 5x2

    PetroShevchenko/LED_driver

    Open hardware project of the LED driver for trench flashlight, created for the needs of Ukrainian volunteers

    150 partsCERN-OHL-S-2.0
  • 2 layers100 × 70 mmLED driver panel 5x1, the printed circuit board in 3D

    LED driver panel 5x1

    PetroShevchenko/LED_driver

    Open hardware project of the LED driver for trench flashlight, created for the needs of Ukrainian volunteers

    80 partsCERN-OHL-S-2.0
  • 2 layers20 × 30 mmLED driver Rev C, the printed circuit board in 3D

    LED driver Rev C

    PetroShevchenko/LED_driver

    Open hardware project of the LED driver for trench flashlight, created for the needs of Ukrainian volunteers

    15 partsCERN-OHL-S-2.0

Similar boards

  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 6 layers235.1 × 213.7 mmQuiver PT3 Main PCB rounded, the printed circuit board in 3D

    Quiver PT3 Main PCB rounded

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    164 parts617CERN-OHL-S-2.0
  • 2 layers103.3 × 63.7 mmUsb power hub, the printed circuit board in 3D

    Usb power hub

    dilshan/usb2-power-hub

    4-Port High Power USB 2.0 Hub

    100 parts189MIT
  • 6 layers178 × 211 mmCBC PCB, the printed circuit board in 3D

    CBC PCB

    Arrow-air/project-caribou

    Project Caribou documentation, designs, and project artifacts.

    319 parts177CERN-OHL-S-2.0
  • 6 layers84 × 98 mmFujiNet-5200-Rev0, the printed circuit board in 3D

    FujiNet-5200-Rev0

    FujiNetWIFI/fujinet-hardware

    Schematics and design files for FujiNet hardware

    145 parts142
  • 2 layers100 × 68 mmSI4684 SMD, the printed circuit board in 3D

    SI4684 SMD

    PE5PVB/SI4684-DAB-Receiver

    SI4684 ESP32 DAB Receiver

    91 parts135GPL-3.0
  • 2 layers191.5 × 76 mmPcb project, the printed circuit board in 3D

    Pcb project

    CrashOverride85/zc95

    4 channel EStim box inspired by the mk312bt, with Lua scripting support

    337 parts117GPL-3.0
  • 6 layers64.8 × 69.9 mmEzDV, the printed circuit board in 3D

    EzDV

    tmiw/ezDV

    A FreeDV device based on the ESP32.

    130 parts114

Questions

How big is the LED driver PCB?

It measures 20 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED driver use?

16 parts, built around the SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED driver KiCad files?

From the PetroShevchenko/LED_driver repository on GitHub, at the commit this page was made from: the board is kicad/LED_driver_Rev_A/LED_driver.kicad_pcb and its schematic kicad/LED_driver_Rev_A/LED_driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED driver design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).