2 layers79.2 × 59.2 mm
4 layers53 × 54 mm
Had Konzole
petrcernyy/game_boy- Size
- 53 × 54 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 51
- Pads
- 159
- Tracks, vias
- 325, 62
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Jun 2023
- Updated
- 27 Sep 2023
Overview
Had Konzole is an open-source printed circuit board by petrcernyy, from the petrcernyy/game_boy repository on GitHub. It is a 4-layer board of 53 × 54 mm with 61 parts on 51 nets, routed with 325 tracks and 62 vias.
It is built around the ATMEGA328P-AU, FT231XS-R and MIC5504-3.3YM5. Its parts include 21 connectors, 9 capacitors, 9 resistors, 3 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FT231XS-R
SSOP-20-150mil-40℃~+85℃ 125uA 5V 8.4mA USB 2.0 USB to UART SSOP-20-150mil USB Converters ROHSFTDIUSB Converters
MIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
KiCAD_Old/GameBoy_KiCad_old/README.mdgame_boy
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | TestPoint | TestPoints:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12 |
| 6 | 3V3 | TestPoint:TestPoint_Pad_D2.0mm | J6, J7, J9, J11, J14, J20 |
| 5 | 10k | Passives:R_0603_1608Metric | R2, R4, R5, R6, R7 |
| 4 | 100n | Passives:C_0603_1608Metric | C4, C5, C8, C10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | 12p | Passives:C_0603_1608Metric | C6, C7 |
| 2 | 1u | Passives:C_0603_1608Metric | C1, C2 |
| 2 | 5.1k | Passives:R_0603_1608Metric | R8, R9 |
| 2 | GND | TestPoint:TestPoint_Pad_D2.0mm | J15, J21 |
| 1 | 0 | Passives:R_0603_1608Metric | R3 |
| 1 | 130 | Passives:R_0603_1608Metric | R1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 3V3_O | TestPoint:TestPoint_Pad_D2.0mm | J13 |
| 1 | 4.7u | Passives:C_0603_1608Metric | C3 |
| 1 | 5V | TestPoint:TestPoint_Pad_D2.0mm | J1 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | CE | TestPoint:TestPoint_Pad_D2.0mm | J16 |
| 1 | CLK | TestPoint:TestPoint_Pad_D2.0mm | J19 |
| 1 | D | TestPoint:TestPoint_Pad_D2.0mm | J5 |
| 1 | DC | TestPoint:TestPoint_Pad_D2.0mm | J17 |
| 1 | DIN | TestPoint:TestPoint_Pad_D2.0mm | J18 |
| 1 | FT231XS | Package_SO:SSOP-20_3.9x8.7mm_P0.635mm | U2 |
| 1 | ISP | Connectors:Conn_01x04_90 | J2 |
| 1 | ISP/UART | Connectors:SPDT_switch | SW6 |
| 1 | L | TestPoint:TestPoint_Pad_D2.0mm | J10 |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | R | TestPoint:TestPoint_Pad_D2.0mm | J12 |
| 1 | RED_LED | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D1 |
| 1 | RST | TestPoint:TestPoint_Pad_D2.0mm | J3 |
| 1 | U | TestPoint:TestPoint_Pad_D2.0mm | J8 |
| 1 | USB_C | Connectors:USB480003A | J4 |
Questions
How big is the Had Konzole PCB?
It measures 53 × 54 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Had Konzole use?
61 parts, built around the ATMEGA328P-AU, FT231XS-R and MIC5504-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Had Konzole KiCad files?
From the petrcernyy/game_boy repository on GitHub, at the commit this page was made from: the board is KiCAD_Old/GameBoy_KiCad_old/Had_Konzole.kicad_pcb and its schematic KiCAD_Old/GameBoy_KiCad_old/Had_Konzole.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Had Konzole design in my own project?
Its repository states no licence, so its author keeps all rights: ask petrcernyy before reusing the design.
Similar boards
- 4 layers68.6 × 53.3 mm
- 4 layers138.4 × 138.3 mm
GRBL board
ephemeridis/GRBL_board
This is a PCB designed to run GRBL, an open source CNC control software that is designed and optimised for Arduino.
287 parts2GPL-3.0 - 2 layers97 × 64 mm
- 2 layers68 × 55 mm
Aurdino oled. sd card
ayodhyaphanidurgaprasad-source/PCB-Projects
Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.
66 parts - 2 layers99.8 × 70.1 mm
Cnc grbl
emavap/Grbl-Pro-V2-PCB
Grbl Board that supports 4 step motors and up too two spindles
68 parts - 2 layers127.5 × 50.5 mm
Lidarsystemcopy
filipandersson3/Gait-speed-lidar-system
Lidar system for measuring walking speed using a Garmin LIDAR-Lite v3
54 parts - 4 layers58 × 54 mm
Otto Project Kicad
TUDA-MUST/Otto-DIY-MUST
Otto DIY MUST, is an improved version of the famous Otto DIY, specifically designed for classroom use.
88 partsCC-BY-SA-4.0