
Laser projector
phuid/laser_projector
this script installs all the dependencies of my programs and sets up the RaspberryPi to start all the programs on boot using pm2.

Midi to CV converter using Raspberry Pi Pico
Pico midi2cv is an open-source printed circuit board by peterzimon, from the peterzimon/pico-midi2cv repository on GitHub. It is a 2-layer board of 75 × 100 mm with 40 parts on 60 nets, routed with 211 tracks and 18 vias.
It is built around the LM358 and MCP4822-E/P. Its parts include 11 resistors, 6 capacitors, 6 connectors, 4 ICs and 2 diodes. It belongs with the RP2040 boards of this library.

A simple MIDI to CV converter using MCP4288 DAC.
Uses pico-lib submodule. Clone and pull
with --recurse-submodules, or use git submodule update --init once cloned.
Alternatively you can set git config submodule.recurse true or git config --global submodule.recurse true.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3 |
| 2 | 100n | Zimo_Manual_PCB:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4 |
| 2 | 1k | Zimo_Manual_PCB:R_Axial_Vertical | R3, R8 |
| 2 | 220 | Zimo_Manual_PCB:R_Axial_Vertical | R4, R11 |
| 2 | 22p | Zimo_Manual_PCB:C_Disc_D5.0mm_W2.5mm_P2.50mm | C5, C6 |
| 1 | 100k | Zimo_Manual_PCB:R_Axial_Vertical | R5 |
| 1 | 10k | Zimo_Manual_PCB:R_Axial_Vertical | R7 |
| 1 | 10u | Zimo_Manual_PCB:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 1N4001 | Zimo_Manual_PCB:D_Axial | D2 |
| 1 | 1N4148 | Zimo_Manual_PCB:D_Axial | D1 |
| 1 | 2N3904 | Zimo_Manual_PCB:TO-92_Inline_Wide | Q_GATE_LED1 |
| 1 | 330n | Zimo_Manual_PCB:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 4.7k | Zimo_Manual_PCB:R_Axial_Vertical | R9 |
| 1 | 470 | Zimo_Manual_PCB:R_Axial_Vertical | R10 |
| 1 | 47k | Zimo_Manual_PCB:R_Axial_Vertical | R1 |
| 1 | 51k | Zimo_Manual_PCB:R_Axial_Vertical | R6 |
| 1 | 68k | Zimo_Manual_PCB:R_Axial_Vertical | R2 |
| 1 | 6N138 | Zimo_Manual_PCB:DIP-8_W7.62mm | U4 |
| 1 | CV Out | Zimo_Manual_PCB:NSL25_01x02_Vertical | J_CV1 |
| 1 | Conn_01x20_Male | Zimo_Manual_PCB:PinOut_01x20 | J2 |
| 1 | Gate Out | Zimo_Manual_PCB:NSL25_01x02_Vertical | J_GATE1 |
| 1 | Jack-DC (12-32V) | Zimo_Manual_PCB:NSL25_01x02_Vertical | J1 |
| 1 | LED | Zimo_Manual_PCB:NSL25_01x02_Vertical | D_GATE_LED1 |
| 1 | LM358 | Zimo_Manual_PCB:DIP-8_W7.62mm | U2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | MCP4822 | Zimo_Manual_PCB:DIP-8_W7.62mm | U3 |
| 1 | MIDI In | Zimo_Manual_PCB:PinOut_01x05 | J_MIDI_IN1 |
| 1 | MIDI Keyboard Power | Zimo_Manual_PCB:NSL25_01x02_Vertical | J6 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U_PICO1 |
| 1 | Power 1 | Zimo_Manual_PCB:NSL25_01x02_Vertical | J3 |
| 1 | Power 2 | Zimo_Manual_PCB:NSL25_01x02_Vertical | J4 |
| 1 | Power to MCU | Zimo_Manual_PCB:PinOut_01x02 | J5 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile | SW_MIDI_CHANNEL1 |
| 1 | UART Programming | Zimo_Manual_PCB:PinOut_01x04 | J_SWD_IO1 |

phuid/laser_projector
this script installs all the dependencies of my programs and sets up the RaspberryPi to start all the programs on boot using pm2.


tomcombriat/TES_10-knobs-synth
Software and hardware files for the TES 10k synths serie, cheap synthesizer powered with Mozzi using a STM32 BluePill as its main chip

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer



It measures 75 × 100 mm and has 2 copper layers, 1.6 mm thick.
40 parts, built around the LM358 and MCP4822-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the peterzimon/pico-midi2cv repository on GitHub, at the commit this page was made from: the board is schematics/pico-midi2cv.kicad_pcb and its schematic schematics/pico-midi2cv.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask peterzimon before reusing the design.