2 layers44.5 × 46.9 mm
OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k
2 layers100 × 70 mm
Sous vide
PeterMitrano/sous-videmaking a thing that makes food
- Size
- 100 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 38
- Pads
- 104
- Tracks, vias
- 133, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Dec 2017
- Updated
- 7 Mar 2018
Overview
Sous vide is an open-source printed circuit board by PeterMitrano, from the PeterMitrano/sous-vide repository on GitHub. It is a 2-layer board of 100 × 70 mm with 31 parts on 38 nets, routed with 133 tracks and 0 vias.
Its parts include 7 resistors, 6 diodes, 5 ICs, 5 connectors and 2 capacitors. It belongs with the ESP8266 boards of this library.
README
README.mdSous-Vide
My first PCB design project.
Final Results!
Materials
Schematic
see sous-vide.sch
PCB
Mains power is scary. I used this to calculate trace width/clearance: http://www.desmith.net/NMdS/Electronics/TraceWidth.html
Revision Notes
- Hole size of screw terminals are too small. Should be 1.8542mm
- Screw terminals are a bad idea, use IEC connector
- Higher power heater
- Buzzer/Dinger!
- One wire for thermistor/heater
- Something to stir the water around
- Label on V+ and V- on heater are backwards (J1)
- Button footprint is wrong
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | D | Diodes_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D4 |
| 3 | LED | LEDs:LED_D5.0mm | D3, D5, D6 |
| 2 | 11k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R6 |
| 2 | 43 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 2 | Jumper | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J4, J5 |
| 2 | MountingHole_3.2mm_M3 | Mounting_Holes:MountingHole_3.2mm_M3 | MT1, MT2 |
| 2 | SW_Push_Dual | Buttons_Switches_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1, SW2 |
| 1 | 1.1k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 110 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 200nF | Capacitors_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 2N3904 | TO_SOT_Packages_THT:TO-92_Molded_Narrow | Q1 |
| 1 | 330uF | Capacitors_THT:CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 430 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | Fuse | custom:Fuse_Holder_65600001009 | F1 |
| 1 | G5LE | Relays_THT:Relay_SPDT_OMRON-G5LE-1 | U1 |
| 1 | Heater | custom:NC6-P108-02 | J1 |
| 1 | LCD_Backpack | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | U5 |
| 1 | P090S | custom:P090S-THT_MNT | U4 |
| 1 | Power | custom:NC6-P108-02 | J2 |
| 1 | RAC01 | custom:RAC01-05SC | U2 |
| 1 | node_mcu1.0 | custom:NodeMCU_1_0 | U3 |
Questions
How big is the Sous vide PCB?
It measures 100 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sous vide use?
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sous vide KiCad files?
From the PeterMitrano/sous-vide repository on GitHub, at the commit this page was made from: the board is kicad_proj/sous-vide.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sous vide design in my own project?
Its repository states no licence, so its author keeps all rights: ask PeterMitrano before reusing the design.
Similar boards
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm
MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm
CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm
Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
31 parts447MIT - 2 layers77.2 × 69.8 mm
- 2 layers103 × 55 mm
