
Twinusb.kicad
s-t-e-f-a-n/twinusb
H₂H³ | Twin USB Host Switch × Triple USB Hub (with OLED Telemetry)

stacked usb splitter for model 3, end launch
Stacked model3 usb is an open-source printed circuit board by peteEH, from the peteEH/model3-usbsplitter-stacked repository on GitHub. It is a 2-layer board of 24.4 × 18.6 mm with 6 parts on 6 nets, routed with 12 tracks and 1 via.
It is built around the UP2-AH-1-TH. Its parts include 2 capacitors, 2 connectors and 1 resistor.
stacked usb splitter for model 3, end launch
BOM to get the splitter assembled
Part Number Quantity Comments 5787745-2 1 double stacked, type-A, USB receptacle UP2-AH-1-TH 1 plug, type-A, usb 4.7uF Cap 1 Any capacitor, 0805 package, 10V or higher rating, 1uF to 6.8uF cap range 2 ohm res 1 0805 package, 1.5 to 3 ohms 22uF Cap 1 Any capacitor, 1210 package, 10V or higher rating, 10uF to 47uF cap range
PCB 1 Order PCB from JLC PCB or similar fab house (QTY 5 for $2 @ JLC)
Hardware License is Creative Commons - Attribution 3.0
Feel free to use these files to learn, explore electronics.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 22uF|1210 | Capacitor_SMD:C_1210_3225Metric | C2 |
| 1 | 2|0805 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4.7uF|0805 | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 5787745-2 | 5787745-2:TE_5787745-2 | J2 |
| 1 | UP2-AH-1-TH | digikey-footprints:USB_Male_A_UP2-AH-1-TH | J1 |
The 5 most common of 6 parts.

s-t-e-f-a-n/twinusb
H₂H³ | Twin USB Host Switch × Triple USB Hub (with OLED Telemetry)

tobycm/homemade-security-key
DIY a security key! powered by a rp2350 for a pretty good security :D

Nithish772/USB-to-Ethercat-Adapter-Board-
Design and development of a USB-to-EtherCAT Adapter Board for USB-to-EtherCAT communication and industrial automation applications.


peteEH/USB-vertical-splitter-model3
Vertical USB Splitter - side firing receptacles

Singanavenasahasra/USB-TO-ETHERCAT-ADAPATER-BOARD
Designed a USB-to-EtherCAT interface board in KiCad, covering schematic development, component selection, PCB placement and routing.

RedBulletTooling/crypsis-public
This contains, all files from hardware to software production and all to make Crypsis

rain-1/nora-b106
Minimum assembly is still U1 plus C1 (4.7 µF) and C2 (100 nF), with external regulated 3.3 V and SWD wires. Headers are optional. The module's 82 hidden LGA pads need controlled reflow/hot-plate assembly.
It measures 24.4 × 18.6 mm and has 2 copper layers, 1.6 mm thick.
6 parts, built around the UP2-AH-1-TH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the peteEH/model3-usbsplitter-stacked repository on GitHub, at the commit this page was made from: the board is stacked_model3_usb/stacked_model3_usb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask peteEH before reusing the design.