Skip to the content
SHSHSHSH4321

UP2-AH-1-TH

CUIExtended

插件 D-Sub / VGA Connectors ROHS

Part id
cui/UP2-AH-1-TH
Category
D Sub, VGA Connectors
Package
插件
Pins
8
In stock
0 at JLCPCB (C3197971)
Used on
10 open-source boards

Overview

The UP2-AH-1-TH is a d Sub, VGA Connector made by CUI in a 插件 package with 5 pins. 插件 D-Sub / VGA Connectors ROHS.

PCBKit's library has its KiCad symbol (dk_USB-DVI-HDMI-Connectors:UP2-AH-1-TH, from Digikey) and its footprint (digikey-footprints:USB_Male_A_UP2-AH-1-TH, from Digikey), ready for a KiCad board. JLCPCB lists it (part C3197971). 10 open-source boards in 9 repositories on GitHub use it.

Symbol

1234SH
dk_USB-DVI-HDMI-Connectors:UP2-AH-1-THFrom Digikey

Footprint

SHSHSHSH4321
digikey-footprints:USB_Male_A_UP2-AH-1-THFrom Digikey

Pinout

5
The pins of the UP2-AH-1-TH
PinNameType
1—Passive
2—Passive
3—Passive
4—Passive
SH—Passive

Open-source boards using it

10See all 10
  • 4 layers63 × 20 mmTwinusb.kicad, the printed circuit board in 3D

    Twinusb.kicad

    s-t-e-f-a-n/twinusb

    H₂H³ | Twin USB Host Switch × Triple USB Hub (with OLED Telemetry)

    120 parts7
  • 2 layers22 × 33 mmHomemade security key, the printed circuit board in 3D

    Homemade security key

    tobycm/homemade-security-key

    DIY a security key! powered by a rp2350 for a pretty good security :D

    46 parts2MIT
  • 2 layers61.6 × 50.4 mmUsb to eherCAT adapter Board, the printed circuit board in 3D

    Usb to eherCAT adapter Board

    Nithish772/USB-to-Ethercat-Adapter-Board-

    Design and development of a USB-to-EtherCAT Adapter Board for USB-to-EtherCAT communication and industrial automation applications.

    84 parts
  • 2 layers24.4 × 18.6 mmStacked model3 usb, the printed circuit board in 3D

    Stacked model3 usb

    peteEH/model3-usbsplitter-stacked

    stacked usb splitter for model 3, end launch

    6 parts
  • 2 layers27.8 × 25.3 mmUsb vertical splitter, the printed circuit board in 3D

    Usb vertical splitter

    peteEH/USB-vertical-splitter-model3

    Vertical USB Splitter - side firing receptacles

    8 parts
  • 2 layers63.2 × 58.9 mmUSB to EtherCAT Adapter, the printed circuit board in 3D

    USB to EtherCAT Adapter

    Singanavenasahasra/USB-TO-ETHERCAT-ADAPATER-BOARD

    Designed a USB-to-EtherCAT interface board in KiCad, covering schematic development, component selection, PCB placement and routing.

    85 parts
  • 4 layers37 × 17.6 mmKeyvilboard2.0, the printed circuit board in 3D

    Keyvilboard2.0

    RedBulletTooling/crypsis-public

    This contains, all files from hardware to software production and all to make Crypsis

    33 parts6Apache-2.0

Questions

Is there a KiCad symbol and footprint for the UP2-AH-1-TH?

Yes. The symbol is dk_USB-DVI-HDMI-Connectors:UP2-AH-1-TH and the footprint digikey-footprints:USB_Male_A_UP2-AH-1-TH, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the UP2-AH-1-TH?

插件, with 5 pins. Its footprint is drawn on this page.

Where is the UP2-AH-1-TH datasheet?

CUI publishes it: the Datasheet link on this page opens it.

Where can I order the UP2-AH-1-TH?

JLCPCB lists it as part C3197971, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the UP2-AH-1-TH?

10 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.