2 layers27.8 × 25.3 mm
Usb vertical splitter
peteEH/USB-vertical-splitter-model3
Vertical USB Splitter - side firing receptacles
8 parts
2 layers30 × 32 mm
USB Taper Control
peteEH/inlineUSBLimiter- Size
- 30 × 32 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 16
- Pads
- 124
- Tracks, vias
- 176, 53
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Aug 2021
- Updated
- 7 Aug 2021
Overview
USB Taper Control is an open-source printed circuit board by peteEH, from the peteEH/inlineUSBLimiter repository on GitHub, published under the MIT licence. It is a 2-layer board of 30 × 32 mm with 33 parts on 16 nets, routed with 176 tracks and 53 vias.
It is built around the MSP430FR2110IPW16R, LPV811DBV and MAX40200AUK, with the TPS76933DBV, LG R971-KN-1 and UE27AC54100 among its other parts. Its parts include 10 resistors, 9 capacitors, 4 ICs, 4 switches and 3 connectors. It belongs with the MSP430 boards of this library.
Main components
7
MSP430FR2110IPW16R
TSSOP-16-40℃~+85℃ 1.8V~3.6V 10bit 12 16 Bit 16MHz 1KB 2KB Built-in FRAM MSP430 CPU16 TSSOP-16 Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
LPV811DBV
SOT-23-5-40℃~+125℃ 0.002V/us 0.1pA 0.1pA 1 1.6V~5.5V 1uV/℃ 370uV 4.7mA 420nV/√Hz@1kHz 450nA 8kHz 95dB EMI filtering/RF suppression、Built-in compensation、Reverse-phase input protection Rail-to-rail output SOT-23-5 Precision Op Amps ROHSTexas InstrumentsOperational AmplifierMAX40200AUK
SOT23-5Ultra-Tiny Micropower, 1A Ideal Diode with Ultra-Low Voltage DropMaxim Integrated (Analog Devices)UncategorisedTPS76933DBV
SOT-23-5-40℃~+125℃@(Tj) 1 100mA 10V 17uA 190uVrms 3.3V 60dB@(1kHz) 98mV@(100mA) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LG R971-KN-1
0805-30℃~+85℃ 1.4mm square LED 160° 2.2V 570nm 572nm 7.1mcd~45mcd Discrete Diode Emerald Green Water Clear 0805 LED Indication - Discrete ROHSOSRAM Opto SemiconLED Indication - Discrete
UE27AC54100
弯插-40℃~+85℃ 1 1A 30V 4P Black Female Right Angle Type-A USB 2.0 弯插 USB Connectors ROHSAmphenolUSB Connectors
UP2-AH-1-TH
插件插件 D-Sub / VGA Connectors ROHSCUID-Sub / VGA Connectors
README
README.mdinlineUSBLimiter
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K|0603 | Resistor_SMD:R_0603_1608Metric | R2, R4, R7, R10 |
| 4 | PTS 647 SK38 SMTR2 LFS | digikey-footprints:Switch_Tactile_SMD_4.5x4.5mm_TL3315NF160Q | S1, S2, S3, S4 |
| 2 | 0.1|0603 | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 2.2uF|0603 | Capacitor_SMD:C_0603_1608Metric | C6, C8 |
| 2 | 220nF|0603 | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 22uF|0805 | Capacitor_SMD:C_0805_2012Metric | C7, C11 |
| 2 | 4.7uF|0805 | Capacitor_SMD:C_0805_2012Metric | C3, C5 |
| 1 | 0|0603 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 15K|0603 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1uF|0805 | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 2|0603 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 47K|0603 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Conn_01x05 | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J2 |
| 1 | LG_R971-KN-1 | digikey-footprints:0805 | D1 |
| 1 | LPV811DBV | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | MAX40200AUK | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MSP430FR2110IPW16R | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | TPS76933 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | UE27AC54100 | digikey-footprints:USB_A_Female_UE27AC54100 | J4 |
| 1 | UP2-AH-1-TH | digikey-footprints:USB_Male_A_UP2-AH-1-TH | J1 |
The 31 most common of 33 parts.
Questions
How big is the USB Taper Control PCB?
It measures 30 × 32 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USB Taper Control use?
33 parts, built around the MSP430FR2110IPW16R, LPV811DBV, MAX40200AUK and TPS76933DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB Taper Control KiCad files?
From the peteEH/inlineUSBLimiter repository on GitHub, at the commit this page was made from: the board is USB Taper Control.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB Taper Control design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers34.3 × 36.6 mm
- 4 layers
Stm32f103rct6
TylerJulian/STM32F103RCT6-Dev-Board
A stm32f103RCT6 Breakout board for Sooner Competitive Robotics and Personal use.
44 parts1 - 4 layers90 × 80 mm
- 2 layers50 × 85 mm
Usb headphone amp
embediver/usb-headphone-amp
USB Headphone Amplifier based on RP2040, PCM5102A and NE5532.
144 parts - 2 layers
- 4 layers101.6 × 76.2 mm
Pco2-sensor board
NOAA-PMEL/ASVCO2
Open Source Repository for the Autonomous Surface Vehicle CO2 (ASVCO2) gen2 system
154 parts - 2 layers41.3 × 15.2 mm
Bmp280-sensor board
deets/new-joy-tracker
Micropython Code for the New Joy Theater piece in Bochum
11 partsMIT