2 layers309.9 × 119.8 mm
Cockpit
ozkan/Cockpit-Keyboard
A hot swap system column staggered mechanical keyboard, running QMK Firmware on Pro Micro controllers.
144 parts43MIT
2 layers269.8 × 106.3 mm
Peppakbd
peppapighs/peppakbd- Size
- 269.8 × 106.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 76
- Pads
- 412
- Tracks, vias
- 551, 168
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 May 2025
- Updated
- 20 May 2025
Overview
Peppakbd is an open-source printed circuit board by peppapighs, from the peppapighs/peppakbd repository on GitHub. It is a 2-layer board of 269.8 × 106.3 mm with 89 parts on 76 nets, routed with 551 tracks and 168 vias.
It is built around the 1N4148W and MSK12C02. It belongs with the nRF52 and nRF5x boards of this library.
Main components
2Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | 1N4148W | peppakbd:D_SOD123 | LD1, LD2, LD3, LD4, LD5, LD6, LD7, LD10, LD11, LD12, LD13, LD14, LD15, LD16, LD17, LD18 +20 |
| 36 | MX_1U | peppakbd:MX-1U | LMX1, LMX2, LMX3, LMX4, LMX5, LMX6, LMX7, LMX10, LMX11, LMX12, LMX13, LMX14, LMX15, LMX16, LMX17, LMX18 +20 |
| 10 | Spacer | MountingHole:MountingHole_3.2mm_M3 | LH1, LH2, LH3, LH4, LH5, RH1, RH2, RH3, RH4, RH5 |
| 2 | JST-PH | peppakbd:JST_PH | LJ1, RJ1 |
| 2 | MSK12C02 | peppakbd:MSK12C02 | LSW1, RSW1 |
| 2 | XIAO-BLE | peppakbd:XIAO-BLE | LU1, RU1 |
| 1 | PCB | peppakbd:PCB | LPCB1 |
Questions
How big is the Peppakbd PCB?
It measures 269.8 × 106.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Peppakbd use?
89 parts, built around the 1N4148W and MSK12C02. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Peppakbd KiCad files?
From the peppapighs/peppakbd repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb and its schematic bottom/bottom.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Peppakbd design in my own project?
Its repository states no licence, so its author keeps all rights: ask peppapighs before reusing the design.
Similar boards
- 2 layers42 × 32 mm
RAMS - PCB
JanClyde05/Road-Accident-Monitoring-System
This directory contains the planning, specification, and initial KiCad project for RAMS Wearable PCB Revision C. Do not fabricate from this directory yet -- manual schematic wiring and DRC verification are still needed.
68 parts1 - 2 layers284 × 103 mm
- 4 layers100 × 100 mm
Phmod
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
234 parts - 2 layers100 × 95.3 mm
- 2 layers223.5 × 160 mm
- 2 layers133 × 91.4 mm
Cirrus40
schuay/cirrus40
A 40% split mechanical keyboard with a focus on usable rotary encoders
71 parts19CC-BY-4.0 - 2 layers285 × 94.2 mm
Woodpecker
Ardakilic/woodpecker-keyboard
5 row ortholinear keyboard, based on Lumberelite and Lumberjack
145 parts18MIT