2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0
2 layers68.9 × 53.6 mm
Shielduinoboy
pepassaco/Shielduinoboy1Just a PCB Shield for the Arduino UNO of an Arduinoboy
- Size
- 68.9 × 53.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 48
- Pads
- 101
- Tracks, vias
- 99, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Aug 2023
- Updated
- 15 Aug 2023
Overview
Shielduinoboy is an open-source printed circuit board by pepassaco, from the pepassaco/Shielduinoboy repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 68.9 × 53.6 mm with 23 parts on 48 nets, routed with 99 tracks and 0 vias.
It is built around the ARDUINO UNO R3. Its parts include 10 resistors, 7 diodes, 3 connectors, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdShielduinoboy
Just a PCB Shield for the Arduino UNO of an Arduinoboy
Original design by trash80
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R6, R7, R8, R9, R10 |
| 6 | Mode 1 | LED_THT:LED_D3.0mm | D2, D3, D4, D5, D6, D7 |
| 2 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 2 | DIN-5 | Eurocad:MIDI_DIN5 | J1, J2 |
| 1 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 270R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 6N138 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3_WithMountingHoles | A1 |
| 1 | Link cable | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Questions
How big is the Shielduinoboy PCB?
It measures 68.9 × 53.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shielduinoboy use?
23 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shielduinoboy KiCad files?
From the pepassaco/Shielduinoboy repository on GitHub, at the commit this page was made from: the board is KiCAD/Shielduinoboy.kicad_pcb and its schematic KiCAD/Shielduinoboy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shielduinoboy design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
