
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

5v ws2812B led 灯圈, 这里随便推荐一家淘宝店 但这只是个例子,只要长得像的都行,可以选择各种不同尺寸
Esp8266schmetic is an open-source printed circuit board by pei-lu, from the pei-lu/EFursuitEyes repository on GitHub. It is a 2-layer board of 30.3 × 39.1 mm with 8 parts on 18 nets, routed with 24 tracks and 1 via.
It is built around the WEMOS D1 MINI. Its parts include 2 resistors, 1 IC and 1 transistor. It belongs with the ESP8266 boards of this library.
这里是一个电子眼兽装模组的奇妙记录
esp32-s3开发板,购买连接, 这个是官方正品,但是你也可以试试淘宝上其他更便宜的商家,这里我没买过就不做推荐了(芯片也就20块,所以官方价格其实是有点离谱的)只是名字里面带u1的意味着没有天线,请勿使用。如果会玩单片机也可以试试其他的开发板,欢迎贡献环境。
5v ws2812B led 灯圈, 这里随便推荐一家淘宝店 但这只是个例子,只要长得像的都行,可以选择各种不同尺寸
风扇?选配,我是直接拆了实验室的打印机(大雾)
本来我是想自己画板子把所有东西都集成上,但是既然是个开源项目我就不重新发明轮子了,直接拿开发板不香吗,大小差别有没有那么大。。。。我后面应该还是会做个自己的板子的版本,就弄成巨小的那种欢迎会用smd的大佬使用()
各路装师朋友欢迎无偿使用,商用也没关系的, 给个credit就行(
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x02_Socket | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | +J3-, +J4- |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 2N3904 | BJT_NPN_2n3904:TO92127P495H495-3 | Q2 |
| 1 | WEMOS_D1_mini | RF_Module:WEMOS_D1_mini_light | U1 |
| 1 | lefteye | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | + J1 - |
| 1 | righteye | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | - J2 + |

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems

alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)

kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.

htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices


It measures 30.3 × 39.1 mm and has 2 copper layers, 1.6 mm thick.
8 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pei-lu/EFursuitEyes repository on GitHub, at the commit this page was made from: the board is esp8266schmetic/esp8266schmetic.kicad_pcb and its schematic esp8266schmetic/esp8266schmetic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pei-lu before reusing the design.