2 layers126.5 × 83 mm
Pcb pro controller
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
66 parts915
2 layers151.3 × 102.5 mm
Shard
peej/shard-keyboard1Shard split keyboard PCB design files
- Size
- 151.3 × 102.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 48
- Pads
- 353
- Tracks, vias
- 474, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Nov 2017
- Updated
- 21 Nov 2017
Overview
Shard is an open-source printed circuit board by peej, from the peej/shard-keyboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 151.3 × 102.5 mm with 66 parts on 48 nets, routed with 474 tracks and 1 via.
Its parts include 23 diodes, 1 IC and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdWIP
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | DIODE | keyboard_parts:D_SOD123_axial | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +7 |
| 9 | MountingHole_2.2mm_M2 | Mounting_Holes:MountingHole_2.2mm_M2 | M2, M2, M2, M2, M2, M2, M2, M2, M2 |
| 5 | MountingHole_8.4mm_M8 | Mounting_Holes:MountingHole_8.4mm_M8 | M8, M8, M8, M8, M8 |
| 1 | ARDUINO_PRO_MICRO | footprints:ARDUINO_PRO_MICRO | U1 |
| 1 | Extradata | keyboard_parts:PIN_1_SQUARE | EXTRADATA1 |
| 1 | Ground | keyboard_parts:PIN_1_SQUARE | GROUND1 |
| 1 | MX0:10 | Keyboard:MX_DoubleSided | MX0:1 |
| 1 | MX0:11 | Keyboard:MX_DoubleSided | MX0:0 |
| 1 | MX0:6 | Keyboard:MX_DoubleSided | MX0:5 |
| 1 | MX0:7 | Keyboard:MX_DoubleSided | MX0:4 |
| 1 | MX0:8 | Keyboard:MX_DoubleSided | MX0:3 |
| 1 | MX0:9 | Keyboard:MX_DoubleSided | MX0:2 |
| 1 | MX1:10 | Keyboard:MX_DoubleSided | MX1:1 |
| 1 | MX1:11 | Keyboard:MX_DoubleSided | MX1:0 |
| 1 | MX1:6 | Keyboard:MX_DoubleSided | MX1:5 |
| 1 | MX1:7 | Keyboard:MX_DoubleSided | MX1:4 |
| 1 | MX1:8 | Keyboard:MX_DoubleSided | MX1:3 |
| 1 | MX1:9 | Keyboard:MX_DoubleSided | MX1:2 |
| 1 | MX2:10 | Keyboard:MX_DoubleSided | MX2:1 |
| 1 | MX2:11 | Keyboard:MX_DoubleSided | MX2:0 |
| 1 | MX2:6 | Keyboard:MX_DoubleSided | MX2:5 |
| 1 | MX2:7 | Keyboard:MX_DoubleSided | MX2:4 |
| 1 | MX2:8 | Keyboard:MX_DoubleSided | MX2:3 |
| 1 | MX2:9 | Keyboard:MX_DoubleSided | MX2:2 |
| 1 | MX3:10 | Keyboard:MX_DoubleSided | MX3:1 |
| 1 | MX3:6 | Keyboard:MX_DoubleSided | MX3:5 |
| 1 | MX3:7 | Keyboard:MX_DoubleSided | MX3:4 |
| 1 | MX3:8 | Keyboard:MX_DoubleSided | MX3:3 |
| 1 | MX3:9 | Keyboard:MX_DoubleSided | MX3:2 |
| 1 | Reset | keyboard_parts:PIN_1_SQUARE | RESET1 |
| 1 | TRRS | Keyboard:PJ320A_3.5mm_Jack | J1 |
| 1 | TX0 | keyboard_parts:PIN_1_SQUARE | TX0 |
Questions
How big is the Shard PCB?
It measures 151.3 × 102.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shard use?
66 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shard KiCad files?
From the peej/shard-keyboard repository on GitHub, at the commit this page was made from: the board is shard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers94.6 × 46.1 mm
- 2 layers56.9 × 35.2 mm
- 2 layers82 × 120 mm
Sample Numeric Keyboard
famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.
66 parts467 - 2 layers136.8 × 98.6 mm
Hillside
mmccoyd/hillside
Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc
66 parts448MIT - 2 layers115.7 × 95.7 mm
- 2 layers95.2 × 57.2 mm
- 2 layers96.5 × 66 mm
BumperDuino
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
66 parts282