Skip to the content
4 layers100 × 40 mmPlacement Test, the printed circuit board in 3D

This repository contains the pre-project and PCB layout from the TRACTIAN test

Size
100 × 40 mm
Copper layers
4
Thickness
2.01 mm
Parts
57
Nets
24
Pads
166
Tracks, vias
130, 201
Pours
8
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
29 Mar 2026
Updated
30 Mar 2026

Overview

Placement Test is an open-source printed circuit board by pedroctag, from the pedroctag/TRACTIAN_Electronic_test repository on GitHub. It is a 4-layer board of 100 × 40 mm with 57 parts on 24 nets, routed with 130 tracks and 201 vias.

It is built around the LTC7803EUD#PBF, BSC014N04LSI and 150040BS73240, with the BAS40HYT116 among its other parts. Its parts include 24 capacitors, 12 resistors, 4 transistors, 4 connectors and 2 diodes.

Main components

4

README

README.md

Tech Fast Track 2026

Project Structure

  • PCB Layout Project: tractian/Placement Test/.
  • Technical Report: tractian/Hardware Test/Docs/.

Note: Detailed design justifications and constraints are annotated directly on the User.Comments PCB layer.

Parts

57
QtyValueFootprintReferences
510uF-0805_01passive:Capacitor_0805C3, C4, C5, C6, C7
40R-0402_01passive:Resistor_0402R1, R3, R8, R11
41uF-0805_02passive:Capacitor_0805C1, C2, C9, C11
474650074Rmechanical:74650074RJ1, J2, J3, J4
4BSC014N04LSIsemiconductor:TDSON-8-FL_P1.27_5.075x5.9x1.05Q1, Q2, Q3, Q4
4Fiducial_Copper-D1mm_Mask-D2mmmechanical:Fiducial_Copper-D1mm_Mask-D2mmFID1, FID2, FID3, FID4
4MountingHole_2.5mm_PAD_5mmmechanical:MountingHole_2.5mm_PAD-5mmH1, H2, H3, H4
2220uF-8.3x8.3x6.7_01passive:A768KEC16, C17
247uF-0805_01passive:Capacitor_0805C14, C15
2TBD-1206passive:Resistor_1206C19, R6
11.5m-1225_01passive:Resistor_1225R4
1100k-0402_01passive:Resistor_0402R2
1100k-0402_02passive:Resistor_0402R12
1100nF-0402_02passive:Capacitor_0402C22
1100uF-8.3x8.3x6.7_01passive:A768KEC8
110nF-0402_01passive:Capacitor_0402C21
110uF-0402_01passive:Capacitor_0402C12
1150040BS73240semiconductor:LED_0402D2
118.7k-0402_01passive:Resistor_0402R13
11uF-0402_01passive:Capacitor_0402C10
11uH-12.5x12.5x6.2_01passive:SRP1265AL2
122R-0402_01passive:Resistor_0402R9
12k-0402_01passive:Resistor_0402R5
139pF-0402_01passive:Capacitor_0402C18
14.7nF-0402_01passive:Capacitor_0402C20
14.7uF-1206_02passive:Capacitor_1206C13
1470pF-0402_01passive:Capacitor_0402C23
16.19k-0402_01passive:Resistor_0402R7
1680nH-4.1x4.1x1.9_01passive:SRP4020FAL1
182k-0402_01passive:Resistor_0402R10
1BAS40HYT116semiconductor:SOT23-3_P0.95_2.92x1.3x1.12D1
1LTC7803EUD#PBFsemiconductor:VQFN-16-1EP_P0.5_3x3x0.9U1

Similar boards

  • 6 layers29 × 33 mmMINIREX G4, the printed circuit board in 3D

    MINIREX G4

    mathieupommery/MINIREX_G473

    The following table demonstrates the estimated component costs based on Mouser volume pricing. The unit price of each component dynamically adapts to the total quantity required for the entire production batch (1, 100…

    109 parts10
  • 6 layers22.7 × 19 mmHardware V11, the printed circuit board in 3D

    Hardware V11

    mathieupommery/Keyring-GPSTRACKER

    Small gps keyring with a lot of possibilities

    71 parts5
  • 8 layers50 × 48.6 mmPCB PAPI, the printed circuit board in 3D

    PCB PAPI

    mathieupommery/ESE_2526_ROBOTCHATDELAMUERTE

    We first wanted to make a three omniwheeled robot with FOC control on brushless motors.

    169 parts1
  • 4 layers36.4 × 15 mmOvrdrive, the printed circuit board in 3D

    Ovrdrive

    o7-machinehum/phantomdrive

    Seemingly normal USB drive with a hidden security feature

    57 parts1kMIT
  • 4 layers71 × 10 mmDot flipper, the printed circuit board in 3D

    Dot flipper

    pierre-muth/fast-flipdot

    Driving a flipdot matrix differently. All dots simultaneously.

    57 parts145GPL-3.0
  • 4 layers40 × 14 mmHs probe, the printed circuit board in 3D

    Hs probe

    probe-rs/hs-probe

    This is an open hardware probe for the Serial Wire Debug (SWD) and JTAG protocol. It utilizes an STM32F723 MCU which has an USB 2.0 High-speed Phy.

    57 parts145
  • 4 layers31.8 × 27.5 mmProtopoint, the printed circuit board in 3D

    Protopoint

    lab11/polypoint

    Indoor localization based on the DecaWave DW1000.

    57 parts143Apache-2.0
  • 4 layers70 × 70 mm1.Electronics, the printed circuit board in 3D

    1.Electronics

    I-M-Robotics-Lab/STM32-Quadcopter

    Quadcopter design based on STM32F411CEU Blackpill flight controller. Compatible with INAV 6.0 firmware.

    57 parts80GPL-3.0

Questions

How big is the Placement Test PCB?

It measures 100 × 40 mm and has 4 copper layers, 2.01 mm thick.

What parts does the Placement Test use?

57 parts, built around the LTC7803EUD#PBF, BSC014N04LSI, 150040BS73240 and BAS40HYT116. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Placement Test KiCad files?

From the pedroctag/TRACTIAN_Electronic_test repository on GitHub, at the commit this page was made from: the board is tractian/Placement Test/Placement Test.kicad_pcb and its schematic tractian/Hardware Test/Dev/temp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Placement Test design in my own project?

Its repository states no licence, so its author keeps all rights: ask pedroctag before reusing the design.