2 layers92 × 87 mm
ESP32-epaper adapter pan
pcbreflux/espressif
all espressif stuff will committed here
552 parts608GPL-3.0
2 layers94 × 80 mm
ESP32-li ion cell monitor pan
pcbreflux/espressif608all espressif stuff will committed here
- Size
- 94 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 588
- Nets
- 44
- Pads
- 969
- Tracks, vias
- 1,341, 99
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Nov 2016
- Updated
- 23 Aug 2022
Overview
ESP32-li ion cell monitor pan is an open-source printed circuit board by pcbreflux, from the pcbreflux/espressif repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 94 × 80 mm with 588 parts on 44 nets, routed with 1,341 tracks and 99 vias.
It is built around the ESP-WROOM-32D, XC6220B281MR-G and ESDZL5-1F4. Its parts include 72 resistors, 27 capacitors, 15 ICs, 12 transistors and 9 connectors. It belongs with the power and interfaces and adapters boards and the ESP32 boards of this library.
Main components
3
ESP-WROOM-32D
-- WiFi Modules ROHSMIWiFi Modules
XC6220B281MR-G
SOT-25-40℃~+85℃ 1 1A 2.8V 50dB@(1kHz) 50uA 6V Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ESDZL5-1F4
0201-55℃~+150℃@(Tj) 1 100nA 10V 5.5V 60W 7.5pF 7A@8/20us ESD IEC 61000-4-2 Unidirectional 0201 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
esp32/kicad/ESP32-epaper-adapter/README.mdESP32 ePaper Adapter
This project uses information from this Project:
http://www.jsykora.info/2014/06/epd-display-working/
http://www.jsykora.info/welcome/
http://www.jsykora.info/2014/04/mailbag-epaper-display-module/
https://github.com/jsyk/PIP-Watch
see also https://github.com/jsyk/PIP-Watch/blob/master/License_Hardware.txt
Files using the KiCad development version!
Parts
588| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | 100R | Resistor_SMD:R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R2, R2, R2, R11, R11, R11, R17, R17, R17, R18, R18, R18, R19, R19, R19, R20 +32 |
| 27 | Test_Point | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP1, TP1, TP2, TP2, TP2, TP3, TP3, TP3, TP4, TP4, TP4, TP5, TP5, TP5, TP6 +11 |
| 18 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C3, C3, C4, C4, C4, C6, C6, C6, C7, C7, C7, C8, C8, C8, C9 +2 |
| 12 | 100k | Resistor_SMD:R_0603_1608Metric | R13, R13, R13, R14, R14, R14, R15, R15, R15, R16, R16, R16 |
| 12 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q2, Q2, Q2, Q3, Q3, Q3, Q4, Q4, Q4 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R10, R10, R10, R12, R12, R12 |
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric | C2, C2, C2, C5, C5, C5 |
| 6 | Conn_01x01_Female | Connector:Banana_Jack_1Pin | J1, J1, J1, J2, J2, J2 |
| 3 | 100mR | Resistor_SMD:R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R5, R5, R5 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C1, C1 |
| 3 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J3, J3, J3 |
| 3 | ESDZL5-1F4 | Diode_SMD:D_SOD-323_HandSoldering | D2, D2, D2 |
| 3 | ESP-WROOM-32 | module:ESP-WROOM-32-short | U2, U2, U2 |
| 3 | INA226_SOT25-5 | module:VSSOP-10_3.1x3.1mm_P0.5mm | U3, U3, U3 |
| 3 | LOGO | module:Logo_silk_CC-BY-NC-SA_5x2mm | G***, G***, G*** |
| 3 | MMSZ5V6CF | Diode_SMD:D_SOD-123F | D1, D1, D1 |
| 3 | Si7060-00 | Package_TO_SOT_SMD:SOT-23-5 | U4, U4, U4 |
| 3 | Si7060-01 | Package_TO_SOT_SMD:SOT-23-5 | U5, U5, U5 |
| 3 | XC6220B281MR-G | Package_TO_SOT_SMD:SOT-23-5 | U1, U1, U1 |
The 171 most common of 588 parts.
More from pcbreflux/espressif
12- 2 layers99 × 100 mm
ESP32-bat monitor latch pan
pcbreflux/espressif
all espressif stuff will committed here
297 parts608GPL-3.0 - 2 layers97 × 94.7 mm
ESP32-adapter pan esp3212
pcbreflux/espressif
all espressif stuff will committed here
222 parts608GPL-3.0 - 2 layers97.4 × 96.5 mm
- 2 layers90 × 26 mm
ESP32-li ion cell monitor
pcbreflux/espressif
all espressif stuff will committed here
198 parts608GPL-3.0 - 2 layers92 × 83 mm
- 2 layers78 × 26 mm
ESP32-li ion cell monitor
pcbreflux/espressif
all espressif stuff will committed here
106 parts608GPL-3.0 - 2 layers94.5 × 81.5 mm
ESP32-wroover adapter pan
pcbreflux/espressif
all espressif stuff will committed here
84 parts608GPL-3.0 - 2 layers68 × 55.4 mm
- 2 layers33 × 50 mm
- 2 layers23 × 29 mm
- 2 layers33 × 34 mm
Similar boards
- 4 layers50 × 60 mm
Canarynode
aboller1212/canarynode
Custom CAN sensor node: STM32G474 + IMU + environmental, USB-C, 4-layer PCB
65 parts1 - 2 layers127 × 114.3 mm
- 2 layers90 × 40 mm
Esp32-tlk110
kazkojima/esp32-phy
KiCAD files and apps for ESP-WROOM-32 ethernet boards
57 parts34GPL-3.0 - 2 layers93 × 60 mm
Hornbill Open Universal Remote
ExploreEmbedded/hornbill-our
Open Univeral Remote with Hornbill ESP32 dev tools. BLE IR Bridge for device control
75 parts27 - 2 layers36.2 × 39.2 mm
- 2 layers34.3 × 30 mm
Espdisplay
ahinrichs/DoorsignEPD-pcb
ESP-WROOM-32 breakout board to connect it to a Waveshare E-Ink display
11 parts16 - 2 layers93 × 60 mm
Hornbill lights
ExploreEmbedded/hornbill-lights
Firmware and App for controlling RGB LED lights with the Hornbill ESP32 Platform
54 parts16 - 6 layers131 × 80 mm
OpenHardwareHolterMonitor
OpenElectronicsLab/OpenHardwareHolterMonitor
OpenHardware ECG Holter Monitor
165 parts9GPL-3.0
Questions
How big is the ESP32-li ion cell monitor pan PCB?
It measures 94 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-li ion cell monitor pan use?
588 parts, built around the ESP-WROOM-32D, XC6220B281MR-G and ESDZL5-1F4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-li ion cell monitor pan KiCad files?
From the pcbreflux/espressif repository on GitHub, at the commit this page was made from: the board is esp32/kicad/ESP32-li-ion-cell-monitor Ref1.3/ESP32-li-ion-cell-monitor_pan.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-li ion cell monitor pan design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).