

PentaESPConverter
144 leds filled with a new life
- Size
- 34.5 × 27.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 28
- Pads
- 94
- Tracks, vias
- 177, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Mar 2019
- Updated
- 23 Aug 2019
Overview
PentaESPConverter is an open-source printed circuit board by PaulPetring, from the PaulPetring/Pentatube repository on GitHub, published under the MIT licence. It is a 2-layer board of 34.5 × 27.1 mm with 13 parts on 28 nets, routed with 177 tracks and 1 via.
It is built around the ESP32-WROOM-32 and AMS1117-3.3. Its parts include 4 capacitors, 3 connectors, 2 resistors, 2 ICs and 1 diode. It belongs with the ESP32 boards of this library.
Main components
2ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdPentatube
144 leds filled with a new life

Ongoing Documentation:
https://hackmd.c3d2.de/Pentatube
Schematics

| Part | Description | Datasheet |
|---|---|---|
| XCVR1, XCVR2 | Differential Bus Transceiver | SN65176B |
| SRR, SRG, SRB | 8-Bit Shift Register with Latch and Driver | TPIC6595 |
| uC | ATMEL 8-Bit Microncontroller | AT89C2051-24PU |
| MYC | (probably) RGB LED driver with PWM control. marked: JRC 6060 523 | NJU6060 |
Controller
)
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | Conn_02x07_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x07_P2.54mm_Vertical | J1, J2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x05 | Connector_JST:JST_XH_B05B-XH-A_1x05_P2.50mm_Vertical | J3 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | R | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1 |
Similar boards
- 2 layers90 × 76.5 mm

- 2 layers85 × 56 mm

- 2 layers62.2 × 30.5 mm

WLED ESP32 Controller
Hasenpups/WLED_ESP32_Controller
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
24 parts44 - 2 layers150 × 50 mm

- 2 layers40 × 68 mm

MULTIGW
nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible
32 parts30LGPL-2.1 - 2 layers259.5 × 60.7 mm

1512hh control
larryqiann/AP1512HH-ESP32
Coway AP1512HH Main Board replacement with ESP32
71 parts29CERN-OHL-P-2.0 - 2 layers64.6 × 87.1 mm

- 2 layers139.7 × 88.9 mm

Questions
How big is the PentaESPConverter PCB?
It measures 34.5 × 27.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PentaESPConverter use?
13 parts, built around the ESP32-WROOM-32 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PentaESPConverter KiCad files?
From the PaulPetring/Pentatube repository on GitHub, at the commit this page was made from: the board is KiCad/new/PentaESPConverter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PentaESPConverter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).