Skip to the content
4 layers28.6 × 38.2 mmPAMI, the printed circuit board in 3D

code for KRABI PAMIs & cards

Size
28.6 × 38.2 mm
Copper layers
4
Thickness
1.6 mm
Parts
49
Nets
45
Pads
188
Tracks, vias
401, 37
Pours
8
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
8 Oct 2023
Updated
7 May 2024

Overview

PAMI is an open-source printed circuit board by pauloone, from the pauloone/Krabi-PAMI repository on GitHub. It is a 4-layer board of 28.6 × 38.2 mm with 49 parts on 45 nets, routed with 401 tracks and 37 vias.

It is built around the BD9P135MUF-CE2, TC78H621FNG,EL and BC846. Its parts include 3 ICs, 2 resistors, 1 connector, 1 inductor and 1 fuse. It belongs with the STM32 boards of this library.

Main components

3

README

README.md

Krabi PAMIs

board

electronics schematics & PCB designs

Elements:

  • an STM32L0
  • an 3.3V power supply
  • a full H Drive driver for 2 motors (1A max)
  • 4 LEDS outputs connected 2 the 2 motors PWM
  • A switch connector
  • 2 connectors for VL53L1X ToF sensors
  • 2 connectors for CNY70 for line following
  • A power connector with 9V for electronics & power and 3V to raise voltage up to 12V for motors, as well as AU connecting ground
  • A STM32 debug connector
  • A start connector that will inhibit H drives & CNY70 emitters when grounded. Pulled up to 3.3V

Parts

49
QtyValueFootprintReferences
5100nFCapacitor_SMD:C_0603_1608MetricCD_HD1, CD_STM_RST1, CD_STM_VDD3, CD_STM_VDDA1, CIN_3REG2
460Resistor_SMD:R_0603_1608MetricRLEDA1, RLEDA2, RLEDB1, RLEDB2
4Conn_01x04_PinConnector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_VerticalLEDA1, LEDB1, SL1, SL2
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_PadH1, H2, H3, H4
31kResistor_SMD:R_0603_1608MetricRLEDQA1, RLEDQB1, RQSL1
31µFCapacitor_SMD:C_0603_1608MetricCD_STM_VDD2, CREG_3REG1, CREG_3REG2
3BC846Package_TO_SOT_SMD:SOT-23QLEDA1, QLEDB1, QSL1
210kResistor_SMD:R_0603_1608MetricR1, R3
23.2kResistor_SMD:R_0603_1608MetricRSLM1, RSLM2
2Conn_01x03_PinConnector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_VerticalSTART1, SW1
2Conn_01x05_PinConnector_PinHeader_1.00mm:PinHeader_1x06_P1.00mm_VerticalTOF1, TOF2
110µFCapacitor_SMD:C_0805_2012MetricCD_STM1
122µFCapacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-BCIN_3REG1
14.7µFCapacitor_SMD:C_0805_2012MetricCIN_3REG3
14.7µHInductor_SMD:L_1008_2520MetricL1
140Resistor_SMD:R_0603_1608MetricRLSL1
1BD9P135MUF-CE2 PAMI:VQFN20FV4040U1
1Conn_01x01_PinConnector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatForkGND_T1
1Conn_01x04_PinConnector_Wire:SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mmJ1
1Conn_01x05_PinConnector_PinHeader_1.00mm:PinHeader_1x05_P1.00mm_VerticalDEBUG1
1Conn_01x06_PinConnector_Wire:SolderWire-0.5sqmm_1x06_P4.6mm_D0.9mm_OD2.1mmPOW1
1FuseFuse:Fuse_1206_3216MetricF1
1LOGOPAMI:krabiG***
1STM32L031F6PxPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU2
1TC78H621FNGPackage_SO:TSSOP-16_4.4x5mm_P0.65mmU3
1TTTestPoint:TestPoint_Pad_D1.0mm3.3V1

Similar boards

  • 2 layers84.5 × 25.8 mmPhasedUltrasonicArray, the printed circuit board in 3D

    PhasedUltrasonicArray

    Tonikiller10000/UltrasonicPhasedArray

    An ultrasonic Phased Array made out of 8 10mm ultrasonc transmitters.

    19 parts3
  • 4 layers304.6 × 154.2 mmFull Backplane, the printed circuit board in 3D

    Full Backplane

    lucanatorvs/Cluster-Backplane

    69 parts
  • 2 layers96.5 × 68.6 mmEZ Green, the printed circuit board in 3D

    EZ Green

    lucanatorvs/eZ-Green

    This repository contains the firmware and related files for the eZ-Green gauge cluster project, designed for a BMW E36, as part of an EV conversion detailed on vanstraatenelectric.nl.

    44 parts
  • 2 layers100 × 62 mmSodar, the printed circuit board in 3D

    Sodar

    Stachu1/Sodar

    Sodar is a semester project exploring directional ultrasonic object detection using a custom 19-element phased array.

    74 parts
  • 2 layers43 × 35 mmLYFT CTRL, the printed circuit board in 3D

    LYFT CTRL

    mgkoenig/lyft

    LYFT is a sophisticated remote control for your IKEA BEKANT desk.

    43 parts88GPL-3.0
  • 2 layers64.1 × 36.2 mmProbeConverter, the printed circuit board in 3D

    ProbeConverter

    Open-Lab-Starter-Kit/OLSK-Small-CNC

    Open Source CNC Milling machine - Small version - Open Lab Starter Kit

    13 parts62CERN-OHL-W-2.0
  • 4 layers137.4 × 199.1 mmSt251n 20603, the printed circuit board in 3D

    St251n 20603

    schlae/HardDriveInfo

    Repair info and schematics for mostly older MFM hard drives

    277 parts38
  • 4 layers120 × 100 mmBsc, the printed circuit board in 3D

    Bsc

    shining-man/bsc_hw

    Hardware battery safety controller (BSC)

    286 parts31MIT

Questions

How big is the PAMI PCB?

It measures 28.6 × 38.2 mm and has 4 copper layers, 1.6 mm thick.

What parts does the PAMI use?

49 parts, built around the BD9P135MUF-CE2, TC78H621FNG,EL and BC846. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PAMI KiCad files?

From the pauloone/Krabi-PAMI repository on GitHub, at the commit this page was made from: the board is Board/PAMI.kicad_pcb and its schematic Board/PAMI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PAMI design in my own project?

Its repository states no licence, so its author keeps all rights: ask pauloone before reusing the design.