4 layers86 × 99 mm
4 layers95.1 × 68.2 mm
TelemetryPrimePCB
patwitt/PGRacingElectronics4https://www.pgracingteam.pl/
- Size
- 95.1 × 68.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 165
- Pads
- 483
- Tracks, vias
- 1,069, 156
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Nov 2021
- Updated
- 14 Mar 2026
Overview
TelemetryPrimePCB is an open-source printed circuit board by patwitt, from the patwitt/PGRacingElectronics repository on GitHub. It is a 4-layer board of 95.1 × 68.2 mm with 100 parts on 165 nets, routed with 1,069 tracks and 156 vias.
It is built around the MP2359DJ-LF-Z, USBLC6-2SC6 and B230, with the AO3401A among its other parts. Its parts include 36 resistors, 28 capacitors, 8 connectors, 6 ICs and 5 diodes. It belongs with the STM32 boards of this library.
Main components
4
MP2359DJ-LF-Z
TSOT-23-6-40℃~+85℃@(TA) 1 1.2A 1.4MHz 4.5V~24V 810mV~15V Adjustable Buck Buck Built-in No TSOT-23-6 DC-DC Converters ROHSMonolithic Power SystemsDC-DC ConvertersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
B230
SMB-65℃~+150℃ 1 Independent 2A 30V 500mV@2A 500uA@30V 50A SMB Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.md
PGRacing Team Electronics
Main repository for PGRacing Team Electronics group.
Structure
Each Project should have following folder structure:
- Project name
- code - Container for source code (if any).
- PCB - Container for KiCAD PCB project (if any).
- Resources - Container for all additional resources.
- Models - Container for all models (if any).
Getting started
This is an example of how you may give instructions on setting up your project locally. To get a local copy up and running follow these simple example steps.
Prerequisites
This is an example of how to list things you need to use the software and how to install them.
- example
sh example install
Installation
- Clone the repo
sh git clone https://github.com/patwitt/PGRacingElectronics.git
How to make changes
If you want to work on any project, follow this steps:
- Fork the Project
- Create your Feature Branch (
git checkout -b feature/AmazingFeature) - Commit your Changes (
git commit -m 'Add some AmazingFeature') - Push to the Branch (
git push origin feature/AmazingFeature) - Open a Pull Request
GearControl
About gear control
Dashboard
About Dashboard
PDM
About PDM
ETC
About ETC
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 13 | 4K7 | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C22, C24, C25, C29, C30 |
| 4 | 47K | Resistor_SMD:R_0805_2012Metric | R5, R7, R12, R30 |
| 4 | B230 | Diode_SMD:D_SOD-123 | D1, D2, D3, D5 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 3 | 15K | Resistor_SMD:R_0805_2012Metric | R6, R8, R13 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric | C23, C28 |
| 2 | 10u | Inductor_SMD:L_1210_3225Metric | L1, L2 |
| 2 | 120 | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 2 | 12p | Capacitor_SMD:C_0805_2012Metric | C18, C19 |
| 2 | 270 | Resistor_SMD:R_0805_2012Metric | R14, R32 |
| 2 | 2u2 | Capacitor_SMD:C_0805_2012Metric | C20, C21 |
| 2 | 47 | Resistor_SMD:R_0805_2012Metric | R4, R28 |
| 2 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C1, C16 |
| 2 | 5K11 | Resistor_SMD:R_0805_2012Metric | R29, R35 |
| 2 | 6p | Capacitor_SMD:C_0805_2012Metric | C26, C27 |
| 2 | Ferrite | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | LOGO | KICAD_libs:LOGO | G***, G*** |
| 2 | MCP2561-E-SN | MCP2562-E_P:DIP787W45P254L1016H533Q8 | U4, U5 |
| 2 | MP2359DJ-LF-Z | MP2359DT-LF-P:SOT95P280X145-6N | U2, U3 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R34 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R36 |
| 1 | 2-6437285-6 | SamacSys_Parts:264372856 | J1 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 5K | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | 68K | Resistor_SMD:R_0805_2012Metric | R33 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Battery | Battery:BatteryHolder_Keystone_103_1x20mm | BT1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | Extra UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | GROOVE(GPS) | Connector:NS-Tech_Grove_1x04_P2mm_Vertical | J4 |
| 1 | GROOVE(GYRO) | Connector:NS-Tech_Grove_1x04_P2mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Castellated | D4 |
| 1 | LSE 32K | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Wuerth_693072010801 | J6 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J8 |
| 1 | STM32F767ZITx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW2 |
| 1 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J7 |
More from patwitt/PGRacingElectronics
12- 4 layers85.5 × 64 mm
- 4 layers391.2 × 260.6 mm
- 4 layers99.2 × 56.5 mm
- 4 layers97.3 × 90.3 mm
- 4 layers84.3 × 69.1 mm
- 2 layers99.1 × 73.7 mm
- 2 layers94.3 × 76.2 mm
- 2 layers
- 2 layers109.2 × 121.9 mm
- 2 layers85.1 × 104.1 mm
- 4 layers70.3 × 64 mm
Similar boards
- 4 layers49.3 × 47.8 mm
- 2 layers122 × 88 mm
Lipo drainer schematic
mattwach/battery_drainer
Hardware to safely discharge LIPO batteries to storage levels
64 parts11Apache-2.0 - 4 layers
- 4 layers70.8 × 70.8 mm
Stm32 f4xx minimal
amrithHN/stm32f4xx_minimal_dev
stm32f4 minimal dev board with few sensors
79 parts4GPL-3.0 - 4 layers57 × 52 mm
STM32 based project
majdbiw4200/STM32F405RGT-dev-board
STM32 + USB + Buck Converter PCB Design
50 parts3MIT - 4 layers42 × 50.2 mm
- 4 layers60.7 × 40 mm
STM32F4 REV2
pravinsharma15k-ops/STM32F4-Test-Board
STM32F405-based test board designed in KiCad 10, with buck converter, USB, SWD, I2C and UART.
52 parts1 - 4 layers
Questions
How big is the TelemetryPrimePCB PCB?
It measures 95.1 × 68.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the TelemetryPrimePCB use?
100 parts, built around the MP2359DJ-LF-Z, USBLC6-2SC6, B230 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TelemetryPrimePCB KiCad files?
From the patwitt/PGRacingElectronics repository on GitHub, at the commit this page was made from: the board is Telemetry/PCB/TelemetryPrimePCB/TelemetryPrimePCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TelemetryPrimePCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask patwitt before reusing the design.