Patronics/STMWirelessWIP STM32 Wireless support board
STMWireless is an open-source printed circuit board by Patronics, from the Patronics/STMWireless repository on GitHub. It is a 4-layer board with 54 parts on 57 nets, routed with 380 tracks and 78 vias.
It is built around the STM32WLE5CBU6, BGS 12WN6 E6327 and AP63203WU. Its parts include 27 capacitors, 10 resistors, 5 connectors, 4 ICs and 4 inductors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C12, C26 |
| 4 | ~ | Capacitor_SMD:C_0603_1608Metric | C19, C23, C24, C25 |
| 3 | 4.7µF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C7 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 1nF | Capacitor_SMD:C_0603_1608Metric | C20, C27 |
| 2 | 22µF | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | 68pF | Capacitor_SMD:C_0603_1608Metric | C15, C22 |
| 1 | 0R | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | 100nf | Capacitor_SMD:C_0603_1608Metric | C21 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 10µF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 15µH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 1µF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 4.7µH | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 4.k7 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 470nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 47nH | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | 500 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 68nF | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | BALFLB-WL-02D3 | Project_library:BALFHBWL02D3 | IC1 |
| 1 | BGS12WN6E6327 | Package_LGA:Infineon_PG-TSNP-6-10_0.7x1.1mm_0.7x1.1mm_P0.4mm | U3 |
| 1 | CORTEX_DEBUG | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | Crystal_32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | Crystal_32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | GPIO1 | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | J6 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J3 |
| 1 | R | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | STM32WLE5CBU6 | Project_library:UFQFPN48_7X7_STM | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | i2c3 header | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | power on LED | LED_SMD:LED_0603_1608Metric | D2 |
54 parts, built around the STM32WLE5CBU6, BGS 12WN6 E6327 and AP63203WU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Patronics/STMWireless repository on GitHub, at the commit this page was made from: the board is stmWireless/stmWireless.kicad_pcb and its schematic stmWireless/stmWireless.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Patronics before reusing the design.
AndreyPodlesni/stm32wl-lora-rf-pcb
4-layer RF PCB design of a low-power LoRa sensor node based on STM32WLE5CCU6, featuring 50Ω controlled impedance RF routing, SMA antenna interface, and HDC2022 temperature & humidity sensor. Designed in KiCad.
Loredati-svg/LoRa-USB-Dongle
USB-C LoRa dongle (868 MHz) with STM32WLE5, CP2102N USB-UART bridge and SMA antenna connector. KiCad 10 hardware design: schematic, PCB and libraries.
nborkowetz/STM32WL_LoRaSensorNodeDemo
STM32WL55-based low-power LoRaWAN platform for testing modular sensors and end-to-end IoT infrastructure.
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)