6 layers60 × 30 mm
Udsp card
crsknr/hw_udsp-card
A compact DSP development board for real-time embedded audio and sensing
221 parts2GPL-3.0
4 layers100 × 100 mm
Interruptus
parceval/interrruptusA simple Interrupt Controller and Timer made in Verilog
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 144
- Pads
- 383
- Tracks, vias
- 1,400, 159
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 May 2024
- Updated
- 2 Sep 2024
Overview
Interruptus is an open-source printed circuit board by parceval, from the parceval/interrruptus repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 100 × 100 mm with 43 parts on 144 nets, routed with 1,400 tracks and 159 vias.
It is built around the MAX40200AUK, FT2232D and TPS7A2033DQN. Its parts include 17 resistors, 8 capacitors, 7 ICs, 4 connectors and 3 diodes. It belongs with the FPGA and CPLD boards of this library.
Main components
3
MAX40200AUK
SOT23-5Ultra-Tiny Micropower, 1A Ideal Diode with Ultra-Low Voltage DropMaxim Integrated (Analog Devices)Uncategorised
FT2232D
LQFP48Dual USB UART / FIFO I.C.FTDIUncategorised
TPS7A2033DQN
X2SON-4(1x1)-40℃~+125℃ 1 140mV 3.3V 300mA 6.5uA 6V 7uVrms 95dB@(1kHz) Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive X2SON-4(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsUncategorised
README
README.mdinterrruptus
A simple Interrupt Controller and Timer made in Verilog
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R6, R7, R12, R13, R14 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C8 |
| 3 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | 8p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | MAX40200AUK | Package_TO_SOT_SMD:SOT-23-5 | U6, U7 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 33n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 6 MHz | Library:Crystal_SMD_8045-2Pin_8.0x4.5mm_HandSoldering | Y1 |
| 1 | 93CxxB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | ATF1508AS-7JX84 | Package_LCC:PLCC-84_THT-Socket | U1 |
| 1 | C96ABC | Connector_DIN:DIN41612_R_3x32_Female_Horizontal_THT | P1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_02x20_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J4 |
| 1 | FT2232D | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | LOGO | KiCad:logo | G*** |
| 1 | LTC6905xS5-100 | Package_TO_SOT_SMD:TSOT-23-5 | U2 |
| 1 | TPS7A2033 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | USB4110GFA | Library:USB_C_Receptacle_GCT_USB4110 | J3 |
Questions
How big is the Interruptus PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Interruptus use?
43 parts, built around the MAX40200AUK, FT2232D and TPS7A2033DQN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Interruptus KiCad files?
From the parceval/interrruptus repository on GitHub, at the commit this page was made from: the board is kicad/interruptus/interruptus.kicad_pcb and its schematic kicad/interruptus/ethernet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Interruptus design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers91.9 × 53.2 mm
Phoenix main board
Phalkon-Industries/phoenix-instrument
Git repo for the content of the new Phoenix ph handheld instrument.
117 parts2CERN-OHL-S-2.0 - 4 layers88 × 58 mm
BIOCHEST ECG EMG
8aChristian/BIOCHEST-ECG-EMG
Figure 1: Full 4-Layer High-Density Medical PCBA with Galvanic Isolation Barrier & Routed Copper Tracks.
29 parts - 6 layers178 × 118 mm
MoriShield Carrier 6L
aswinserigreen/morishield_hardware
all components bom , pcb layouts and schematics of morishield is maintained here
157 parts - 4 layers71 × 42.8 mm
CadProd compact
botsqerebot/AudioDeck
Everything to change, check and test for rev 2. The main goal is power saving while the player is off:
83 parts - 4 layers285 × 94.5 mm
- 4 layers52 × 41.4 mm
- 4 layers51.4 × 21.1 mm
