2 layers100 × 210 mm
2 layers100 × 173 mm
Encoder rgb
papaya/Modulbox2Midibox files PCB kicad
- Size
- 100 × 173 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 185
- Pads
- 454
- Tracks, vias
- 0, 0
- Pours
- 8
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 May 2024
- Updated
- 22 Oct 2026
Overview
Encoder rgb is an open-source printed circuit board by papaya, from the papaya/Modulbox repository on GitHub. It is a 2-layer board of 100 × 173 mm with 86 parts on 185 nets.
It is built around the 74HC165D, ULN2803A and PEL12T-4226F-S1024, with the 74HC595 among its other parts. Its parts include 26 connectors, 24 resistors, 7 capacitors and 4 ICs. It belongs with the lEDs and displays boards of this library.
Main components
4
74HC165D
SO-16-40℃~+125℃ 1 28ns@6V,50pF 2V~6V 35MHz 500mW 74HC 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift Registers
ULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysPEL12T-4226F-S1024
-UncategorisedBourns
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
README
README.mdParts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 220 ohm | Resistor_SMD:R_1206_3216Metric | R43, R44, R45, R46, R47, R48, R49, R50, R51, R52, R53, R54, R55, R56, R57, R58 +8 |
| 8 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2, J6, J8, J10, J12, J14, J18, J28 |
| 8 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1, J5, J7, J9, J11, J13, J15, J19 |
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 8 | PEL12T-4226F-S1024 | ksir 2022:PEL12T4226FS1024 | Enc_1, Enc_2, Enc_3, Enc_4, Enc_5, Enc_6, Enc_7, Enc_8 |
| 6 | 100NF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C7, C8, C9 |
| 6 | 10K | Resistor_THT:R_Array_SIP6 | RN1, RN2, RN3, RN4, RN5, RN6 |
| 4 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J23, J24, J40, J41 |
| 3 | 74HC165 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | IC4, IC5, IC6 |
| 3 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | SR4, SR5, SR6 |
| 2 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J33, J34 |
| 2 | IDC-Header_2x05_P2.54mm_Vertical | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3, J4 |
| 2 | sin_in | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J16, J17 |
| 1 | 100UF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C11 |
| 1 | ULN2803A | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U2 |
More from papaya/Modulbox
12- 2 layers100 × 50 mm
- 2 layers421.5 × 122 mm
- 2 layers421.6 × 121.9 mm
- 2 layers100 × 50 mm
- 2 layers100 × 50 mm
- 2 layers81.8 × 83.3 mm
- 2 layers100.1 × 100 mm
- 2 layers118 × 87 mm
- 2 layers100 × 50 mm
- 2 layers113.8 × 87.3 mm
- 2 layers100 × 50 mm
Similar boards
- 2 layers100 × 100 mm
- 2 layers86 × 137 mm
EduCiaa PE
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
61 parts15 - 2 layers100 × 100 mm
V2.2 Mechanical Seven Segment Controller
OverInvented/Flippy
The code needed to build a mechanical 7-segment display that uses electromagnets to display characters
53 parts65 - 2 layers28 × 36 mm
- 2 layers110 × 31.5 mm
- 2 layers66.7 × 61.7 mm
Vday
niteshkadyan/Hearty-LED-Necklace-Badge
Kicad project files and Android app for the Hearty LED wearable necklace cum badge
179 parts10MIT - 2 layers100 × 100 mm
Flipdot brose
julianschick/flipdot-brose
Microcontroller code (ESP32) and Circuit Design for controlling Brose Flipdot Modules.
185 parts5MIT - 2 layers73 × 94 mm
8FilPilotes Base
LudovicLemarinel/EspHomeAutomation
Home Automation based on ESP8266 and MQTT
75 parts3
Questions
How big is the Encoder rgb PCB?
It measures 100 × 173 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Encoder rgb use?
86 parts, built around the 74HC165D, ULN2803A, PEL12T-4226F-S1024 and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Encoder rgb KiCad files?
From the papaya/Modulbox repository on GitHub, at the commit this page was made from: the board is MB Modul_Box NG/Encoder with led ring RGB/TEST_NOT_WORKING/Encoders rgb/encoder rgb/encoder rgb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Encoder rgb design in my own project?
Its repository states no licence, so its author keeps all rights: ask papaya before reusing the design.