

Esp matrix
Kicad projects
- Size
- 29 × 54.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 35
- Pads
- 126
- Tracks, vias
- 407, 53
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Jul 2015
- Updated
- 26 Jul 2018
Overview
Esp matrix is an open-source printed circuit board by panStamp, from the panStamp/kicad repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 29 × 54.6 mm with 29 parts on 35 nets, routed with 407 tracks and 53 vias.
It is built around the ESP-12E. Its parts include 11 ICs, 5 capacitors, 3 resistors, 2 connectors and 2 switches. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Main components
1Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 74AHC1G34 | libcms:SOT23-5 | U3, U4, U5, U6, U7, U8, U9, U10, U11 |
| 3 | 10k | mysmd:SM0603S | R2, R4, R8 |
| 2 | 10u | mysmd:SM0603S | C1, C3 |
| 2 | 1u | mysmd:SM0603S | C2, C4 |
| 2 | SW_PUSH_SMALL | switch-tact-noah | SW1, SW2 |
| 2 | VAL** | mymods:fiducial | fiducial, fiducial |
| 1 | 100n | mysmd:SM0603S | C5 |
| 1 | CONN_01X02 | myconnectors:terminal_block_5mm_2P | P2 |
| 1 | CONN_01X07 | pinhead:pinhead-1-1X07 | PROG1 |
| 1 | CONN_02X08 | Pin_Headers:Pin_Header_Straight_2x08 | P1 |
| 1 | D_Schottky_x2_ACom_KKA | mysmd:SOT23 | D1 |
| 1 | ESP-12E | ESP8266:ESP-12E | U1 |
| 1 | FUSE | libcms:SM0805 | F1 |
| 1 | MCP1702-3.3 | libcms:SOT23 | U2 |
| 1 | PANSTAMPLOGO | mymods:PANSTAMPLOGO | G*** |
More from panStamp/kicad
12- 4 layers33.1 × 64.7 mm

- 2 layers121.9 × 86 mm

- 4 layers81 × 76 mm

- 2 layers113 × 180 mm

- 4 layers33.1 × 64.7 mm

- 2 layers91.9 × 86 mm

- 4 layers81 × 76 mm

- 4 layers81 × 76 mm

- 4 layers75 × 95 mm

- 4 layers50.1 × 70.1 mm

- 4 layers55 × 40 mm

- 4 layers25.4 × 55.8 mm

Similar boards
- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers43 × 34.3 mm

- 2 layers25.6 × 23 mm

Breakout
skorokithakis/tiny-ESP8266-breakout
A very small and basic ESP8266 breakout board
12 parts115BSD-2-Clause - 2 layers104.8 × 72.1 mm

SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers30 × 65 mm

Hardpass pcb
girst/hardpass-passwordmanager-mirror-of-git.gir.st
https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.
34 parts101GPL-3.0 - 2 layers82.5 × 22.4 mm

Window Sensor
MakerMeik/Window-Sensor
Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w
19 parts67 - 2 layers49.5 × 30 mm

- 2 layers100 × 45 mm

Questions
How big is the Esp matrix PCB?
It measures 29 × 54.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp matrix use?
29 parts, built around the ESP-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp matrix KiCad files?
From the panStamp/kicad repository on GitHub, at the commit this page was made from: the board is esp-matrix/esp-matrix.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp matrix design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).