

Esp-485
Kicad projects
- Size
- 31 × 82 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 27
- Pads
- 88
- Tracks, vias
- 424, 150
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Jul 2015
- Updated
- 26 Jul 2018
Overview
Esp-485 is an open-source printed circuit board by panStamp, from the panStamp/kicad repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 31 × 82 mm with 28 parts on 27 nets, routed with 424 tracks and 150 vias.
It is built around the ESP-12E and MAX487-TD. Its parts include 6 diodes, 5 capacitors, 5 resistors, 3 ICs and 2 connectors. It belongs with the ESP8266 boards of this library.
Main components
2ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesMAX487-TD
DIP-8-40℃~+85℃ 1 1 1.6mA 128 2.5Mbps 3.3V、5V Half-Duplex Transceiver ±1.5kV DIP-8 RS-485 / RS-422 ICs ROHSTDSEMICRS-485 / RS-422 ICs
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | mysmd:SM0603S | R3, R4, R5 |
| 3 | TVS | mysmd:SOD-923 | D3, D4, D6 |
| 2 | 100n | mysmd:SM0603S | C4, C6 |
| 2 | CONN_01X02 | myconnectors:terminal_block_5mm_2P | P3, P4 |
| 2 | SW_PUSH_SMALL | mysmd:switch-tact-noah | SW1, SW2 |
| 2 | VAL** | mymods:fiducial | fiducial, fiducial |
| 1 | 120 | mysmd:SM0603S | R2 |
| 1 | 1u | mysmd:SM0603S | C3 |
| 1 | 22u | mysmd:SMDCPOL_5 | C2 |
| 1 | 470 | mysmd:SM0603S | R1 |
| 1 | 47u | mysmd:SMDCPOL_6.3 | C1 |
| 1 | CONN_01X07 | Pin_Headers:Pin_Header_Straight_1x07 | PROG1 |
| 1 | DIODESCH | mysmd:SMA | D1 |
| 1 | D_Schottky_x2_ACom_KKA | mysmd:SOT23 | D5 |
| 1 | ESP-12E | ESP8266:ESP-12E | U1 |
| 1 | LED | mysmd:SM0603S_POL | D2 |
| 1 | LOGO | mysmd:oshlogo | G*** |
| 1 | MAX487 | libcms:SO8E | U3 |
| 1 | PANSTAMPLOGO | mymods:PANSTAMPLOGO | G*** |
| 1 | UA78M33 | libcms:SOT223 | U2 |
More from panStamp/kicad
12- 4 layers33.1 × 64.7 mm

- 2 layers121.9 × 86 mm

- 4 layers81 × 76 mm

- 2 layers113 × 180 mm

- 4 layers33.1 × 64.7 mm

- 2 layers91.9 × 86 mm

- 4 layers81 × 76 mm

- 4 layers81 × 76 mm

- 4 layers75 × 95 mm

- 4 layers50.1 × 70.1 mm

- 4 layers55 × 40 mm

- 4 layers25.4 × 55.8 mm

Similar boards
- 2 layers185.5 × 77 mm

MiG-21bis Brandstofpaneel v02
pappavis/Digital-Combat-Simulator
Cockpit Panels en printplate vir DCS World door Michiel Erasmus
26 parts2MIT - 4 layers100 × 70 mm

- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers43 × 34.3 mm

- 2 layers25.6 × 23 mm

Breakout
skorokithakis/tiny-ESP8266-breakout
A very small and basic ESP8266 breakout board
12 parts115BSD-2-Clause - 2 layers104.8 × 72.1 mm

SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers30 × 65 mm

Hardpass pcb
girst/hardpass-passwordmanager-mirror-of-git.gir.st
https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.
34 parts101GPL-3.0 - 2 layers82.5 × 22.4 mm

Window Sensor
MakerMeik/Window-Sensor
Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w
19 parts67
Questions
How big is the Esp-485 PCB?
It measures 31 × 82 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Esp-485 use?
28 parts, built around the ESP-12E and MAX487-TD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp-485 KiCad files?
From the panStamp/kicad repository on GitHub, at the commit this page was made from: the board is esp-485/esp-485.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp-485 design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).