

BarePi PidiBoy
Modular Microchip Kit
- Size
- 65 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 31
- Pads
- 73
- Tracks, vias
- 366, 29
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Jun 2026
- Updated
- 17 Aug 2026
Overview
BarePi PidiBoy is an open-source printed circuit board by Panda381, from the Panda381/BarePi repository on GitHub. It is a 2-layer board of 65 × 26 mm with 10 parts on 31 nets, routed with 366 tracks and 29 vias.
It is built around the CH32V006F8P6. Its parts include 2 resistors, 2 connectors, 1 capacitor and 1 IC. It belongs with the RISC-V boards of this library.
Main components
1Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 15K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | CH32V006F8P6 | Raspberry:Raspberry_TSSOP-20_4.4x6.5mm_P0.65mm | IC1 |
| 1 | OUT | Raspberry:Raspberry_OUT_PinSocket_2x20_P2.54mm_Horizontal | J1 |
| 1 | WCH-LINK | Raspberry:Raspberry_PinHeader_1x03_P2.54mm_Horizontal | J2 |
The 6 most common of 10 parts.
More from Panda381/BarePi
12- 2 layers65 × 57 mm

- 2 layers100 × 75 mm

- 2 layers65 × 106 mm

- 2 layers65 × 48 mm

- 2 layers65 × 42 mm

- 2 layers65 × 65 mm

- 2 layers65 × 65 mm

- 2 layers80 × 61 mm

- 2 layers90 × 50 mm

- 2 layers65 × 65 mm

- 2 layers65 × 65 mm

- 2 layers65 × 48 mm

Similar boards
- 2 layers80 × 70 mm

- 2 layers85.6 × 54 mm

Business Card v2
SattiDaBeaver/Business_Card_v2
RISC-V supercluster PCB business card with 1 master + 8 worker MCUs over a shared UART bus, USB-C edge connector
183 parts1 - 6 layers50 × 40 mm

Osc dev v006
OpenServoCore/open-servo-core
The goal of this project is to create an open servo controller board and firmware.
99 parts39Apache-2.0 - 2 layers57 × 55.2 mm

LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm

Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm

Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm

- 2 layers44.3 × 30.5 mm

Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k
Questions
How big is the BarePi PidiBoy PCB?
It measures 65 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BarePi PidiBoy use?
10 parts, built around the CH32V006F8P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BarePi PidiBoy KiCad files?
From the Panda381/BarePi repository on GitHub, at the commit this page was made from: the board is PidiBoy/KiCAD/BarePi_PidiBoy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BarePi PidiBoy design in my own project?
Its repository states no licence, so its author keeps all rights: ask Panda381 before reusing the design.