Skip to the content
2 layers65 × 106 mmBarePi CalcKey, the printed circuit board in 3D

BarePi CalcKey

Panda381/BarePi4

Modular Microchip Kit

Size
65 × 106 mm
Copper layers
2
Thickness
1.6 mm
Parts
57
Nets
53
Pads
295
Tracks, vias
840, 10
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 Jun 2026
Updated
17 Aug 2026

Overview

BarePi CalcKey is an open-source printed circuit board by Panda381, from the Panda381/BarePi repository on GitHub. It is a 2-layer board of 65 × 106 mm with 57 parts on 53 nets, routed with 840 tracks and 10 vias.

Its parts include 45 switches, 3 connectors, 2 resistors, 1 capacitor and 1 IC. It belongs with the RISC-V boards of this library.

Parts

57
QtyValueFootprintReferences
215KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2
1(Raspberry:SW_PUSH_6mmS53
1)Raspberry:SW_PUSH_6mmS54
1+Raspberry:SW_PUSH_6mmS85
1+/-Raspberry:SW_PUSH_6mmS94
1-Raspberry:SW_PUSH_6mmS75
1.Raspberry:SW_PUSH_6mmS93
10Raspberry:SW_PUSH_6mmS00
11Raspberry:SW_PUSH_6mmS01
11/xRaspberry:SW_PUSH_6mmS35
1100nFCapacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolderC1
12Raspberry:SW_PUSH_6mmS02
12ndRaspberry:SW_PUSH_6mmS21
13Raspberry:SW_PUSH_6mmS03
14Raspberry:SW_PUSH_6mmS04
15Raspberry:SW_PUSH_6mmS05
16Raspberry:SW_PUSH_6mmS06
17Raspberry:SW_PUSH_6mmS07
18Raspberry:SW_PUSH_6mmS08
19Raspberry:SW_PUSH_6mmS09
1:Raspberry:SW_PUSH_6mmS55
1=Raspberry:SW_PUSH_6mmS95
1ARaspberry:SW_PUSH_6mmS11
1A1Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mmJP1
1BRaspberry:SW_PUSH_6mmS12
1BSTRaspberry:SW_PUSH_6mmS51
1CRaspberry:SW_PUSH_6mmS13
1CERaspberry:SW_PUSH_6mmS24
1CH32V002F4P6Raspberry:Raspberry_TSSOP-20_4.4x6.5mm_P0.65mmU1
1CLRRaspberry:SW_PUSH_6mmS25
1DRaspberry:SW_PUSH_6mmS14
1ERaspberry:SW_PUSH_6mmS15
1EERaspberry:SW_PUSH_6mmS52
1GTORaspberry:SW_PUSH_6mmS61
1INRaspberry:Raspberry_IN_PinHeader_2x20_P2.54mm_HorizontalJ1
1INVRaspberry:SW_PUSH_6mmS22
1LRNRaspberry:SW_PUSH_6mmS31
1OUTRaspberry:Raspberry_OUT_PinSocket_2x20_P2.54mm_HorizontalJ2
1R/SRaspberry:SW_PUSH_6mmS91
1RCLRaspberry:SW_PUSH_6mmS43
1RSTRaspberry:SW_PUSH_6mmS81
1SBRRaspberry:SW_PUSH_6mmS71
1SSTRaspberry:SW_PUSH_6mmS41
1STORaspberry:SW_PUSH_6mmS42
1SUMRaspberry:SW_PUSH_6mmS44
1VxRaspberry:SW_PUSH_6mmS34
1WCH-LINKRaspberry:Raspberry_PinHeader_1x03_P2.54mm_HorizontalJ3
1lnxRaspberry:SW_PUSH_6mmS23
1xRaspberry:SW_PUSH_6mmS65
1x2Raspberry:SW_PUSH_6mmS33
1x<>tRaspberry:SW_PUSH_6mmS32
1yxRaspberry:SW_PUSH_6mmS45

The 53 most common of 57 parts.

More from Panda381/BarePi

12
  • 2 layers65 × 57 mmBarePi TestLed, the printed circuit board in 3D

    BarePi TestLed

    Panda381/BarePi

    Modular Microchip Kit

    78 parts4
  • 2 layers100 × 75 mmBarePi MiniKey, the printed circuit board in 3D

    BarePi MiniKey

    Panda381/BarePi

    Modular Microchip Kit

    61 parts4
  • 2 layers65 × 48 mmBarePi PidiMet, the printed circuit board in 3D

    BarePi PidiMet

    Panda381/BarePi

    Modular Microchip Kit

    44 parts4
  • 2 layers65 × 42 mmBarePi Base, the printed circuit board in 3D

    BarePi Base

    Panda381/BarePi

    Modular Microchip Kit

    28 parts4
  • 2 layers65 × 65 mmBarePi ExtDisp, the printed circuit board in 3D

    BarePi ExtDisp

    Panda381/BarePi

    Modular Microchip Kit

    25 parts4
  • 2 layers65 × 65 mmBarePi SumoPad, the printed circuit board in 3D

    BarePi SumoPad

    Panda381/BarePi

    Modular Microchip Kit

    25 parts4
  • 2 layers80 × 61 mmBarePi LCD16x2, the printed circuit board in 3D

    BarePi LCD16x2

    Panda381/BarePi

    Modular Microchip Kit

    23 parts4
  • 2 layers90 × 50 mmBarePi LED12, the printed circuit board in 3D

    BarePi LED12

    Panda381/BarePi

    Modular Microchip Kit

    23 parts4
  • 2 layers65 × 65 mmBarePi PGA2350, the printed circuit board in 3D

    BarePi PGA2350

    Panda381/BarePi

    Modular Microchip Kit

    23 parts4
  • 2 layers65 × 65 mmBarePi Port, the printed circuit board in 3D

    BarePi Port

    Panda381/BarePi

    Modular Microchip Kit

    20 parts4

Similar boards

  • 2 layers59.2 × 52.9 mmMagic epaper, the printed circuit board in 3D

    Magic epaper

    fossasia/magic-epaper-hardware

    Magic ePaper Hardware

    57 parts1kApache-2.0
  • 2 layers100 × 70.3 mmModulAdapter universal, the printed circuit board in 3D

    ModulAdapter universal

    GaudiLabs/OpenDrop

    Open Source Digital Microfluidics Bio Lab

    57 parts492GPL-3.0
  • 2 layers165.1 × 120.7 mmIfei, the printed circuit board in 3D

    Ifei

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    57 parts431
  • 2 layersFabricated boards, the printed circuit board in 3D

    Fabricated boards

    justbuchanan/oasis

    3d-printed smart terrarium

    57 parts270Apache-2.0
  • 2 layers121.1 × 104.7 mmSepia officinalis, the printed circuit board in 3D

    Sepia officinalis

    tapioki/cephalopoda

    Low profile split ergonomic mechanical keyboards

    57 parts240GPL-3.0
  • 2 layers100 × 96.5 mmKeyboard ch32x-36-lhs, the printed circuit board in 3D

    Keyboard ch32x-36-lhs

    rgoulter/keyboard-labs

    Repo with my PCB designs and keyboard firmware

    57 parts236
  • 2 layers178 × 39 mmAddOnA, the printed circuit board in 3D

    AddOnA

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    57 parts226CC-BY-SA-4.0
  • 2 layers58 × 110 mmBrain ui, the printed circuit board in 3D

    Brain ui

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    57 parts222

Questions

How big is the BarePi CalcKey PCB?

It measures 65 × 106 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BarePi CalcKey use?

57 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BarePi CalcKey KiCad files?

From the Panda381/BarePi repository on GitHub, at the commit this page was made from: the board is CalcKey/KiCAD/BarePi_CalcKey.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the BarePi CalcKey design in my own project?

Its repository states no licence, so its author keeps all rights: ask Panda381 before reusing the design.