Skip to the content
4 layers36 × 35.7 mmDisplay, the printed circuit board in 3D

The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…

Size
36 × 35.7 mm
Copper layers
4
Thickness
0.8 mm
Parts
48
Nets
90
Pads
261
Tracks, vias
5,795, 190
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
29 Sep 2026
Updated
6 Nov 2026

Overview

Display is an open-source printed circuit board by Panda-Intelligence, from the Panda-Intelligence/panda-standard-board repository on GitHub. It is a 4-layer board of 36 × 35.7 mm with 48 parts on 90 nets, routed with 5,795 tracks and 190 vias.

It is built around the SY7636ARMC, XL9535 and RC-02K1003FT, with the 0402B104K250NT, RC-02K1002FT and RC-02K1001FT among its other parts. Its parts include 17 capacitors, 13 resistors, 4 diodes, 3 connectors and 2 ICs. It belongs with the lEDs and displays boards of this library.

Main components

12

README

README.md

Current development entry — Panda Standard (E0.2 r26 / v0.1.1)

The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including positive tolerances. The exact pack identity, complete panel suffix/assembly and finished tolerance stack remain unaccepted. A CAD candidate is NOT FOR FABRICATION OR POWER.

Start with the current Single Unified PCB handoff and the Panda Standard source/build guide. Source code is under hardware/pico47/; each finished single-board release (Single.kicad_pcb and its native KiCad project/libraries) is committed under its version-named directory:

  • hardware/pico47/v0.1.0/ (R25 full-rectangle 4-layer baseline)
  • hardware/pico47/v0.1.1/ (R26 L-step 4-layer board with X = 38.0 mm battery bay clearance & Option 1 upper-right support bay) Temporary generated rebuild reports and manufacturing archives remain in ignored .work/ or the external panda-board-deliverables directory. The older Split-C1 / Product-D / Thin7 designs below are electrical donors or historical experiments, not the current product or approval to export/order it.

Current r24 native checkpoint: Core 16 opens; Display 0 opens; DRC errors, warnings, parity and ERC are zero. MUX0 is connected, while the remaining non-ground routing is still unfinished. All 237 ground pads retain their reference connections. 16 non-ground unconnected items remain; not for fabrication or power. The dated handoff records actual source replay, delivery archives and engineering limits. Continue with capture_pico47_checkpoint.py --require-complete-ground.

Run source regressions without EDA or manufacturing side effects:

sh
python3 -m unittest discover -s hardware/pico47 -p 'test_*.py'
python3 -m unittest discover -s hardware/thin18-compact -p 'test_*.py'

Capture a continuation with hardware/pico47/capture_pico47_checkpoint.py only after native review. It checks fresh DRC/ERC, exact rules/geometry/library bindings and every previous native pad group. Missing evidence, lost connections or increased opens/warnings reject the checkpoint. It never grants fabrication or physical qualification, including when native counts happen to reach zero.


Panda Standard Board

Open hardware design sources and engineering documentation for the Panda Standard Board, maintained by Panda Intelligence.

Historical Split-C1 electrical donor

The historical electrical donor is the populated Core-C1 96 x 68 mm / 4-layer plus Display-C1 45 x 36 mm / 2-layer design already split and routed on main. Start with Split-C1 handoff and the PG/PSEL functional migration. Do not replace it with Thin7/portrait-R2 experimental CAD merely because an experiment has a newer timestamp. Thin7 remains a separate, incomplete 7-mm mechanical target and is not claimed by the Split-C1 bench prototype.

Inspect the historical pipeline without generating manufacturing data:

sh
python3 hardware/thin18-compact/release_split_c1.py --target split-c1 --plan

Bare-board CAM/DFM, accepted PCBA supply and physical EVT are separate gates. The new supervisor is a mainland part, but its exact assembly code/receipt is not yet confirmed. No production qualification or actual purchase is implied.

Historical published Thin18 baseline

The earlier published integrated-board engineering baseline was:

  • Board: Thin18 domestic EVT
  • PCB checkpoint: routing142
  • PCB SHA-256: ccc19c5402f633638ed72e7c94a92375684037a1f9c04f63072dc58f86c16071
  • KiCad validation: 0 DRC violations, 0 unconnected items, 0 schematic-parity errors; ERC 0
  • Status: engineering / EVT — not a manufacturing release

The baseline includes the current right-side microSD access geometry. Manufacturing, assembly, SI/PI, RF, thermal, tolerance-stack and physical EVT qualification remain separate release gates.

Repository layout

text
hardware/
  thin18/
    routing142/        Current KiCad engineering baseline and machine-readable verification evidence
docs/
  design/              Electrical architecture, interfaces, power tree, constraints and design rules
  verification/        ERC/layout/fabrication-readiness engineering reviews
  mechanical/          Board/mechanical interface review notes
LICENSES/

Opening the historical donor design

The design was validated with KiCad 10.0.5. Open the complete project under:

text
hardware/thin18-compact/core-c1-96x68-split/eda/core/PANDA-STD-CORE-EVT/PANDA-THIN16/
hardware/thin18-compact/display-c1-45x36-production-bom/

Project-local symbol and footprint libraries are included where the design depends on them.

Product visualization

Explore the interactive Thin18 routing142 assembly model or watch the exploded-view video on YouTube.

The model is an engineering visualization for design communication. Mechanical fit and manufacturing readiness require separate validation.

Verification boundary

A clean KiCad DRC/ERC result means the design database is internally consistent. It does not establish production qualification, regulatory compliance, component derating, RF performance, thermal margin, assembly yield or mechanical fit of real production parts.

Use tagged manufacturing releases, when available, for fabrication rather than assuming the newest engineering checkpoint is production-ready.

Licensing

Hardware design sources: CERN-OHL-S-2.0.

Documentation: CC BY-SA 4.0, unless otherwise noted.

Third-party component models, symbols, footprints, manufacturer names and trademarks retain their respective rights and licensing terms.

Split-C1 executable control follow-up

Portable bench-control core implements tested XL9535/SGM41513/SGM37601 sequencing and a read-only QMI8658A identity probe. Host tests and native pin/address binding checks run in the explicit Split-C1 export pipeline. This is not product-firmware integration or physical EVT. The hardware-finish ECO adds default-off charge authorization and a native GPIO2 shutdown path. Read the updated control binding before using any older firmware. Physical EVT and accepted assembly supply remain separate gates.

Current fabrication entry

The combined review package contains a generated START-HERE.md; use its separate Core/Display Gerber paths and source hashes. The fabrication handoff now matches the native four-layer35um Core copper construction and ENIG/green-mask selection. C301 now has checked1.9mm round PTHs instead of short slots; the actual stackup and assembly process still need CAM acceptance. Native DRC/DFM success is not automatic fabrication/PCBA order approval.

Split-C1 SMT process selection

The native assembly-process auditor and its tests now run before fabrication export. Core contains13 drilled vias intersecting SMT copper lands; its order must explicitly include epoxy filling and copper capping for the generated list. This is distinct from soldermask tenting/plugging and must not fill component lead holes or slots. The generated prototype package includes ASSEMBLY-PROCESS.md and per-board VIA-IN-PAD.csv, bound to the saved PCB and checked against Excellon drill hits. Small WLCSP and connector lands retain ENIG and need assembler stencil/process confirmation. No source copper is changed by this audit; supplier acceptance is still required.

Parts

48
QtyValueFootprintReferences
1100kPanda47:R810_DisplayR810
1100kPanda47:R809_DisplayR809
1100kPanda47:R811_DisplayR811
1100kPanda47:R808_DisplayR808
1100kPanda47:R812_DisplayR812
1100n/25V/0402Panda47:C815_DisplayC815
1100n/25V/0402Panda47:C817_DisplayC817
110kPanda47:R807_DisplayR807
110k NTC / CURVE TO QUALIFYPanda47:TH801_DisplayTH801
110u/10V/0805Panda47:C801_DisplayC801
110u/10V/0805Panda47:C803_DisplayC803
110u/10V/0805Panda47:C816_DisplayC816
11kPanda47:R813_DisplayR813
11u/50V/0805Panda47:C809_DisplayC809
11u/50V/0805Panda47:C812_DisplayC812
11u/50V/0805Panda47:C810_DisplayC810
11u/50V/0805Panda47:C807_DisplayC807
121k/0.1%Panda47:R802_DisplayR802
136k/1%Panda47:R806_DisplayR806
14.7u/25V/0805Panda47:C804_DisplayC804
14.7u/25V/0805Panda47:C805_DisplayC805
14.7u/25V/0805Panda47:C814_DisplayC814
14.7u/25V/0805Panda47:C806_DisplayC806
14.7u/25V/0805Panda47:C802_DisplayC802
14.7u/25V/0805Panda47:C813_DisplayC813
14.7uH / MWSA0618S-4R7MTPanda47:L801_DisplayL801
14.7uH / MWSA0618S-4R7MTPanda47:L802_DisplayL802
1442k/0.1%Panda47:R801_DisplayR801
147n/50V/0805Panda47:C811_DisplayC811
147n/50V/0805Panda47:C808_DisplayC808
159k/0.1%Panda47:R804_DisplayR804
17.5k/1%Panda47:R805_DisplayR805
1750k/0.1%Panda47:R803_DisplayR803
1BAV99Panda47:D803_DisplayD803
1BAV99Panda47:D804_DisplayD804
1MBR0530 / PEAK REVIEWPanda47:D802_DisplayD802
1MBR0530 / PEAK REVIEWPanda47:D801_DisplayD801
1P47_BORDER_REVIEWPanda47:TP806_DisplayTP806
1P47_VCOMPanda47:TP805_DisplayTP805
1P47_VGHPanda47:TP801_DisplayTP801
1P47_VGLPanda47:TP802_DisplayTP802
1P47_VNEGPanda47:TP804_DisplayTP804
1P47_VPOSPanda47:TP803_DisplayTP803
1SY7636ARMCPanda47:U810_DisplayU810
1X05A10L20G / 20P FFCPanda47:J4_DisplayJ4
1X05A10L40G / 40P FFCPanda47:J1_DisplayJ1
1X05A10L40G / E0470A01Panda47:J820_DisplayJ820
1XL9535 / ADDRESS0x21Panda47:U811_DisplayU811

More from Panda-Intelligence/panda-standard-board

6
  • 4 layers71 × 99 mmSingle, the printed circuit board in 3D

    Single

    Panda-Intelligence/panda-standard-board

    The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…

    253 parts
  • 4 layers71 × 129 mmCore, the printed circuit board in 3D

    Core

    Panda-Intelligence/panda-standard-board

    The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…

    208 parts
  • 4 layers96 × 68 mmPANDA STD CORE EVT quilter j501-merged, the printed circuit board in 3D

    PANDA STD CORE EVT quilter j501-merged

    Panda-Intelligence/panda-standard-board

    The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…

    176 parts
  • 4 layers96 × 68 mmPANDA STD CORE EVT quilter j501-merged, the printed circuit board in 3D

    PANDA STD CORE EVT quilter j501-merged

    Panda-Intelligence/panda-standard-board

    The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…

    155 parts
  • 2 layers45 × 36 mmPANDA EPD0426-SPI EVT, the printed circuit board in 3D

    PANDA EPD0426-SPI EVT

    Panda-Intelligence/panda-standard-board

    The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…

    37 parts
  • 2 layers45 × 36 mmPANDA EPD0426-SPI EVT, the printed circuit board in 3D

    PANDA EPD0426-SPI EVT

    Panda-Intelligence/panda-standard-board

    The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…

    37 parts

Similar boards

  • 4 layers20 × 30 mmMicro17, the printed circuit board in 3D

    Micro17

    M17-Project/Micro17

    M17 baseband processor board - OpenRTX on a Module

    93 parts20
  • 4 layers42 × 100 mmLockBox, the printed circuit board in 3D

    LockBox

    researchanddesire/assembly-docs

    RAD unified assembly docs — ohai.researchanddesire.com

    81 parts
  • 2 layers120 × 120 mmCoaster, the printed circuit board in 3D

    Coaster

    evansj/ESP32-LED

    A Stargate thing...

    282 parts1GPL-3.0
  • 2 layers70 × 70 mmFaikout, the printed circuit board in 3D

    Faikout

    dovy6/Faiked

    This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…

    47 partsGPL-3.0
  • 2 layers100 × 70 mmRTD2662Board, the printed circuit board in 3D

    RTD2662Board

    KerJoe/RTD2662Board

    Prototype board for RTD2662 display controller

    259 parts24
  • 2 layers85 × 115 mmOSO BOOK B1, the printed circuit board in 3D

    OSO BOOK B1

    joeycastillo/The-Open-Book

    For details on how to build, test and use Open Book, I've made documentation available here.

    76 parts8.1kCC-BY-SA-4.0
  • 4 layers95 × 55.5 mmEinkPDA keyboard, the printed circuit board in 3D

    EinkPDA keyboard

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    137 parts2kApache-2.0

Questions

How big is the Display PCB?

It measures 36 × 35.7 mm and has 4 copper layers, 0.8 mm thick.

What parts does the Display use?

48 parts, built around the SY7636ARMC, XL9535, RC-02K1003FT and 0402B104K250NT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Display KiCad files?

From the Panda-Intelligence/panda-standard-board repository on GitHub, at the commit this page was made from: the board is panda-board-deliverables/panda47-e02-20261019-r24-mux0-source/engineering-candidate/Display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Display design in my own project?

Its repository states no licence, so its author keeps all rights: ask Panda-Intelligence before reusing the design.