Skip to the content
2 layers61 × 38.1 mmInterface converter plugin, the printed circuit board in 3D

Interface converter plugin

palouse-robosub/pcbs-2018

This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

Size
61 × 38.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
12
Pads
30
Tracks, vias
87, 14
Routed
Yes
KiCad
KiCad 4
Created
7 Oct 2016
Updated
26 Sep 2018

Overview

Interface converter plugin is an open-source printed circuit board by palouse-robosub, from the palouse-robosub/pcbs-2018 repository on GitHub. It is a 2-layer board of 61 × 38.1 mm with 6 parts on 12 nets, routed with 87 tracks and 14 vias.

Its parts include 4 ICs and 2 connectors. It belongs with the interfaces and adapters boards of this library.

Parts

6
QtyValueFootprintReferences
43mm-supportrobosub_footprints:3mm-supportU1, U2, U3, U4
1CONN_02X06Pin_Headers:Pin_Header_Angled_2x06_Pitch2.54mmP2
1Mezzanine-Headerrobosub_footprints:3mm-10pos-receptacleP1

More from palouse-robosub/pcbs-2018

12
  • 4 layers90.9 × 60.5 mmHydrophone adc, the printed circuit board in 3D

    Hydrophone adc

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    224 parts
  • 4 layers152.8 × 66.3 mmHydrophone adc, the printed circuit board in 3D

    Hydrophone adc

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    200 parts
  • 2 layers105.8 × 10.4 mmPneumatics, the printed circuit board in 3D

    Pneumatics

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    58 parts
  • 2 layers43.2 × 35.6 mmInterface converter, the printed circuit board in 3D

    Interface converter

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    56 parts
  • 2 layers38.7 × 31.2 mmInterface converter, the printed circuit board in 3D

    Interface converter

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    50 parts
  • 2 layers35.6 × 73.7 mmMaestro adapter, the printed circuit board in 3D

    Maestro adapter

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    49 parts
  • 2 layers38.7 × 31.2 mmInterface converter, the printed circuit board in 3D

    Interface converter

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    48 parts
  • 2 layers34.2 × 72.9 mmMaestro adapter, the printed circuit board in 3D

    Maestro adapter

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    48 parts
  • 2 layers66.5 × 44.4 mmDepthSensorBoard, the printed circuit board in 3D

    DepthSensorBoard

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    47 parts
  • 2 layers55.9 × 40 mmDepthSensorBoard, the printed circuit board in 3D

    DepthSensorBoard

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    34 parts
  • 2 layers58.4 × 45.7 mmLed controller, the printed circuit board in 3D

    Led controller

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    34 parts
  • 2 layers116.8 × 15.2 mmReed switch mount, the printed circuit board in 3D

    Reed switch mount

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    28 parts

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the Interface converter plugin PCB?

It measures 61 × 38.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Interface converter plugin use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Interface converter plugin KiCad files?

From the palouse-robosub/pcbs-2018 repository on GitHub, at the commit this page was made from: the board is pressuretester/interface-converter-plugin.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Interface converter plugin design in my own project?

Its repository states no licence, so its author keeps all rights: ask palouse-robosub before reusing the design.