
Hydrophone adc
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
Interface converter is an open-source printed circuit board by palouse-robosub, from the palouse-robosub/pcbs-2018 repository on GitHub. It is a 2-layer board of 38.7 × 31.2 mm with 50 parts on 34 nets, routed with 581 tracks and 57 vias.
It is built around the FT232H. Its parts include 14 capacitors, 13 connectors, 12 resistors, 4 diodes and 3 ICs. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitors_SMD:C_0402 | C2, C3, C6, C8, C9, C12, C16, C18 |
| 6 | TST | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | P8, P9, P10, P11, P12, P13 |
| 4 | 10k | Resistors_SMD:R_0402 | R4, R5, R6, R8 |
| 4 | CONN_01X01 | robosub_footprints:1.5mm-spacer | P4, P5, P6, P7 |
| 2 | 0 | Resistors_SMD:R_0603 | R7, R10 |
| 2 | 10n | Capacitors_SMD:C_0402 | C4, C7 |
| 2 | 20p | Capacitors_SMD:C_0402 | C10, C11 |
| 2 | 4.7u | Capacitors_SMD:C_0603 | C1, C5 |
| 2 | 65 | Resistors_SMD:R_0402 | R2, R3 |
| 1 | 12k/1% | Resistors_SMD:R_0402 | R11 |
| 1 | 150 | Resistors_SMD:R_0402 | R12 |
| 1 | 1u | Capacitors_SMD:C_0603_HandSoldering | L1 |
| 1 | 1u | Capacitors_SMD:C_0603 | L2 |
| 1 | 2k | Resistors_SMD:R_0402 | R9 |
| 1 | 5 | Resistors_SMD:R_0402 | R1 |
| 1 | 93LCxxB-6 | TO_SOT_Packages_SMD:SOT-23-6 | U1 |
| 1 | ABM8G-12M | robosub_footprints:DFN-4 | U2 |
| 1 | CONN_02X05 | robosub_footprints:DF40C-10DS-Receptacle | P2 |
| 1 | CONN_02X05 | robosub_footprints:DF40C-10DP-Header | P3 |
| 1 | FT232H | robosub_footprints:QFN_48-8x8 | U3 |
| 1 | LED | LEDs:LED_0603 | D4 |
| 1 | LOGO | robosub_footprints:robosub_logo-medium | G*** |
| 1 | ON | LEDs:LED_0603 | D3 |
| 1 | RX | LEDs:LED_0603 | D2 |
| 1 | TEST_1P | Measurement_Points:Measurement_Point_Round-TH_Small | W1 |
| 1 | TX | LEDs:LED_0603 | D1 |
| 1 | USB_OTG | robosub_footprints:USB-Micro-B-TH | P1 |

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

tinyvision-ai-inc/UPduino-v3.0
UPduino 3.0: new 4 layer layout, various other improvements

efabless/caravel_board
This repo provides firmware examples, flash programming and diagnostic tools for testing Open MPW and chipIgnite projects using Caravel.

riktw/HUB75E_ICE40
SpinalHDL code to drive a 64*64 pixel HUB75E module with an ICE40




anthonydotmoe/68040pc
A general purpose computer platform for retrocomputing enthusiasts

It measures 38.7 × 31.2 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the FT232H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the palouse-robosub/pcbs-2018 repository on GitHub, at the commit this page was made from: the board is interface-converter/revA/interface-converter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask palouse-robosub before reusing the design.