
MBO
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

Normally open (HIGH) keychron low profile optical hitbox
Keychron hitbox is an open-source printed circuit board by Palochrono, from the Palochrono/IR_box repository on GitHub, published under the MIT licence. It is a 2-layer board of 208.5 × 125 mm with 61 parts on 56 nets, routed with 628 tracks and 68 vias.
Its parts include 16 resistors, 16 switches and 6 ICs. It belongs with the RP2040 boards of this library.
Normally open (HIGH) keychron low profile optical hitbox Keychron switches footprint from here
| Component | Description | Number_used |
|---|---|---|
| R_IR | 180 $\Omega$ 0805 | 16 |
| R_PT | 2k $\Omega$ 0603 | 16 |
| Phototransistor | 0805 | 16 |
| IR_led | 0805 | 16 |
| Rp2040-zero | Waveshare | 1 |
| Pushbutton | 6*6mm | 4 |
| Key switches | Keychron optical low profile | 16 |
| OLED display | 0.96 inch I2C SSD1306 | 1 |
| Keycap set | DOIO KCGM-02 KCGM-03 | 1 |
Half-vias used to use the extra pins in rp2040-zero
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | R_0805 | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 16 | R_PT | PCM_4ms_Resistor:R_0603 | RP1, RP2, RP3, RP4, RP5, RP6, RP7, RP8, RP9, RP10, RP11, RP12, RP13, RP14, RP15, RP16 |
| 5 | MountingHoleSprt | MyFootprints:MountingHole_2.2mm_M2_ISO7380_Pad | HS1, HS2, HS3, HS4, HS5 |
| 4 | ~ | MyFootprints:6x6pushbutton | U1, U2, U3, U4 |
| 2 | S2 | MyFootprints:Keychron_Optical_Switch_23mm | S1, S2 |
| 1 | B1 | MyFootprints:Keychron_Optical_Switch_23mm | S9 |
| 1 | B2 | MyFootprints:Keychron_Optical_Switch_23mm | S10 |
| 1 | B3 | MyFootprints:Keychron_Optical_Switch_23mm | S13 |
| 1 | B4 | MyFootprints:Keychron_Optical_Switch_23mm | S14 |
| 1 | DOWN | MyFootprints:Keychron_Optical_Switch_23mm | S6 |
| 1 | L1 | MyFootprints:Keychron_Optical_Switch_23mm | S16 |
| 1 | L2 | MyFootprints:Keychron_Optical_Switch_23mm | S12 |
| 1 | L3 | MyFootprints:Keychron_Optical_Switch_23mm | S4 |
| 1 | LEFT | MyFootprints:Keychron_Optical_Switch_23mm | S8 |
| 1 | LOGO | MyFootprints:transistor_mask | G*** |
| 1 | R1 | MyFootprints:Keychron_Optical_Switch_23mm | S15 |
| 1 | R2 | MyFootprints:Keychron_Optical_Switch_23mm | S11 |
| 1 | R3 | MyFootprints:Keychron_Optical_Switch_23mm | S3 |
| 1 | RIGHT | MyFootprints:Keychron_Optical_Switch_23mm | S7 |
| 1 | RP2040-Zero-extended | MyFootprints:RP2040 Zero zllpin | U5 |
| 1 | SSD1306 | MyFootprints:128x64OLED_hollowed | Brd1 |
| 1 | UP | MyFootprints:Keychron_Optical_Switch_26mm | S5 |
| 1 | ~ | MyFootprints:usba_header | U6 |

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

TeXitoi/keyseebee
KeySeeBee is a split ergo keyboard. It is only 2 PCB (so the name) with (almost) only SMD components on it. It's only a keyboard, no LED, no display, nothing more than keys and USB.


Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...


It measures 208.5 × 125 mm and has 2 copper layers, 1.69 mm thick.
61 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Palochrono/IR_box repository on GitHub, at the commit this page was made from: the board is kicad/keychron_hitbox.kicad_pcb and its schematic kicad/keychron_hitbox.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).