2 layers33.8 × 46 mm
4 layers87 × 87 mm
Eboard
pacew/eboard- Size
- 87 × 87 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 103
- Nets
- 70
- Pads
- 440
- Tracks, vias
- 770, 122
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Jul 2021
- Updated
- 3 Jul 2021
Overview
Eboard is an open-source printed circuit board by pacew, from the pacew/eboard repository on GitHub. It is a 4-layer board of 87 × 87 mm with 103 parts on 70 nets, routed with 770 tracks and 122 vias.
It is built around the CP2102, ESP32-PICO-D4 and SRV05-4, with the TP4056, TPS63000DRC and BSS138K among its other parts. Its parts include 30 resistors, 18 capacitors, 18 connectors, 15 transistors and 8 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
9
CP2102
-Non-isolated TYPE-A UART(TTL) USB2.0 - USB Conversion Modules ROHSAi-ThinkerUSB Conversion Modules
ESP32-PICO-D4
QFN-48-EP(7x7)-40℃~+85℃ -97dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 2.7V~3.6V 20dBm Bluetooth、WiFi SPI、I2C transceiver QFN-48-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
TPS63000DRC
UncategorisedTexas Instruments
BSS138K
SOT-231 N-channel 1.5Ω@10V 1V 2.2pF 25pF 400mA 417mW 60V 650pC@4.5V 9.7pF N-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETs
AO4407
SOP-8-55℃~+150℃ 1 P-Channel 1.75nF 10A 180pF 2.1W 20mΩ@4.5V 24nC@15V 30V 3V SOP-8 MOSFETs ROHSJSMSEMIMOSFETsS8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
SS210
SMA(DO-214AC)-55℃~+150℃ 1 Independent 100V 2A 500uA@100V 850mV@2A SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
103| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R12, R13, R14, R31, R32, R36, R37, R38, R39, R40, R41, R42 |
| 10 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R8, R15, R16, R17, R18, R19, R20 |
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C10, C20, C21 |
| 9 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J5, J11, J12, J13, J14, J15, J20, J21 |
| 8 | BSS138K | Package_TO_SOT_SMD:SOT-23 | Q9, Q10, Q12, Q13, Q14, Q15, Q16, Q17 |
| 5 | 100 | Resistor_SMD:R_0402_1005Metric | R5, R30, R33, R34, R35 |
| 5 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C9, C11, C13, C14 |
| 5 | AO4407 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q11, Q18, Q19, Q20 |
| 5 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J16, J17, J18, J19 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U4, U7, U8, U9 |
| 2 | 330pF | Capacitor_SMD:C_0402_1005Metric | C22, C24 |
| 2 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | bead | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | ledyellow | LED_SMD:LED_0603_1608Metric | D2, D4 |
| 2 | pushbutton_switch | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 180k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 1meg | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C23 |
| 1 | 2.2pF | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 2.2uH | Inductor_SMD:L_Coilcraft_XxL4020 | L1 |
| 1 | Antenna_Shield | Connector_Coaxial:SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | AE1 |
| 1 | CP2102 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm_ThermalVias | U5 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | ESP32-PICO-D4 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm | U1 |
| 1 | SS210 | Diode_SMD:D_SMA | D3 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U3 |
| 1 | TPS63000 | Package_SON:Texas_DRC0010J_ThermalVias | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J2 |
| 1 | jst_battery | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4 |
| 1 | ledgreen_0805 | LED_SMD:LED_0805_2012Metric | D1 |
Questions
How big is the Eboard PCB?
It measures 87 × 87 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Eboard use?
103 parts, built around the CP2102, ESP32-PICO-D4, SRV05-4 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eboard KiCad files?
From the pacew/eboard repository on GitHub, at the commit this page was made from: the board is eboard/eboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask pacew before reusing the design.
Similar boards
- 4 layers33.8 × 46 mm
- 4 layers74.1 × 130 mm
- 2 layers66 × 67 mm
AC Controller
Qeteshpony/AC-Controller
Universal WiFi-Based remote control for IoT Devices
88 partsBSD-2-Clause - 2 layers87.9 × 78.1 mm
- 4 layers65 × 56 mm
- 2 layers58 × 58 mm
Ups lead acid electgpl v1.0
electgpl/MiniUPS12VLead-Acid
This project implements a mini uninterruptible power supply (UPS) designed for 12V Lead-Acid AGM/GEL batteries. It integrates a dedicated CN3767 lead-acid charger, a PMOS + Schottky bypass circuit, a TPS54360 buck…
78 parts - 2 layers54.8 × 60.8 mm
