Skip to the content
2 layers122.5 × 115.6 mmInitialDesign, the printed circuit board in 3D

OzSecCon Badge Dev environment

Size
122.5 × 115.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
49
Nets
53
Pads
194
Tracks, vias
2,311, 101
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
8 Jan 2018
Updated
14 Jan 2018

Overview

InitialDesign is an open-source printed circuit board by ozseccon, from the ozseccon/ozseccon-dev-badge repository on GitHub. It is a 2-layer board of 122.5 × 115.6 mm with 49 parts on 53 nets, routed with 2,311 tracks and 101 vias.

It is built around the STM32F042C6T6 and M24SR02-YMN6T/2. Its parts include 12 capacitors, 11 resistors, 9 connectors, 7 diodes and 3 ICs. It belongs with the STM32 boards of this library.

Main components

2

Parts

49
QtyValueFootprintReferences
5LEDLEDs:LED_1206D3, D4, D5, D6, D7
5RResistors_SMD:R_0805R7, R8, R9, R10, R11
3100nFCapacitors_SMD:C_0805C4, C5, C7
3FiducialFiducials:Fiducial_1.5mm_Dia_2.54mm_Outer_CopperTopFID1, FID2, FID3
210kResistors_SMD:R_0805R5, R6
210nFCapacitors_SMD:C_0805C3, C11
210uFCapacitors_SMD:CP_Elec_4x5.3C1, C2
222Resistors_SMD:R_0805R1, R2
24.7uFCapacitors_SMD:C_0805C8, C9
25050_LED_RGBLEDs:LED_RGB_5050-6D1, D2
2Conn_01x02Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJ5, J6
2Conn_01x04Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mmJ2, J3
1100pFCapacitors_SMD:C_0805C10
11020_KeystoneBattery_Holders:Keystone_2466_1xAAABT1
11uFCapacitors_SMD:C_0805C6
12.7MResistors_SMD:R_0805R3
14.7uHInductors_SMD:L_Taiyo-Yuden_NR-30xxL1
1470kResistors_SMD:R_0805R4
1Antenna_Looplib_dp:NFC_AntennaAE1
1CCapacitors_SMD:C_0805C12
1Conn_01x07_FemaleSocket_Strips:Socket_Strip_Straight_1x07_Pitch2.54mmJ1
1Conn_02x02_Odd_EvenPin_Headers:Pin_Header_Straight_2x02_Pitch2.54mmJ8
1Conn_02x03_Odd_EvenPin_Headers:Pin_Header_Straight_2x03_Pitch2.54mmJ7
1Conn_02x08_Odd_EvenPin_Headers:Pin_Header_Straight_2x08_Pitch2.54mmJ9
1G***lib_dp:Skullyskully
1M24SR02-YMN6THousings_SOIC:SO-8_5.3x6.2mm_Pitch1.27mmU3
1STM32F042C6T6Housings_QFP:LQFP-48_7x7mm_Pitch0.5mmU2
1TPS61222DCKRlib_dp:SC-70-6U1
1USB_OTGConnectors:USB_Micro-BJ4

Similar boards

  • 2 layers78.4 × 68 mmHcppnfc, the printed circuit board in 3D

    Hcppnfc

    monero-project/kastelo

    The Sekura Monero Hardware Wallet

    13 parts115
  • 2 layers54 × 128.6 mmPrototype, the printed circuit board in 3D

    Prototype

    ozseccon/ozseccon2019_badge

    development repo for 2019 badge

    32 parts2
  • 2 layers19 × 44 mmPentesting rd schematics, the printed circuit board in 3D

    Pentesting rd schematics

    51n0nGG0/pentesting_rd

    Custom STM32-based USB HID device inspired by a Rubber Ducky

    22 parts1MIT
  • 4 layers20.3 × 61 mmStm32devboard, the printed circuit board in 3D

    Stm32devboard

    psas/mints-scada-hardware

    Minimal Test Stand Supervisory

    44 parts
  • 2 layers173 × 122.5 mmCapBank, the printed circuit board in 3D

    CapBank

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    49 parts915
  • 2 layers85.1 × 49.8 mmAvrcraft m644, the printed circuit board in 3D

    Avrcraft m644

    cnlohr/avrcraft

    Minecraft server optimized for 8-bit devices.

    49 parts471
  • 2 layers50 × 90 mmMouse, the printed circuit board in 3D

    Mouse

    biomurph/Mouse

    Repository for Open Source Mouse Firmware and Hardware

    49 parts362MIT
  • 2 layers126.4 × 15.2 mmV5probe, the printed circuit board in 3D

    V5probe

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    49 parts332

Questions

How big is the InitialDesign PCB?

It measures 122.5 × 115.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the InitialDesign use?

49 parts, built around the STM32F042C6T6 and M24SR02-YMN6T/2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the InitialDesign KiCad files?

From the ozseccon/ozseccon-dev-badge repository on GitHub, at the commit this page was made from: the board is InitialDesign/InitialDesign.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the InitialDesign design in my own project?

Its repository states no licence, so its author keeps all rights: ask ozseccon before reusing the design.