Skip to the content
PCBKitNew board
2 layers21.6 × 20.3 mmMic2250 boost 01, the printed circuit board in 3D

Mic2250 boost 01

oxycon/ProjectApollo41

Designs/docs/software/PCB for Project Apollo (open source oxygen concentrator)

Size
21.6 × 20.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
5
Pads
21
Tracks, vias
54, 2
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
18 Mar 2020
Updated
3 Aug 2022

Overview

Mic2250 boost 01 is an open-source printed circuit board by oxycon, from the oxycon/ProjectApollo repository on GitHub, published under the MIT licence. It is a 2-layer board of 21.6 × 20.3 mm with 10 parts on 5 nets, routed with 54 tracks and 2 vias.

Its parts include 2 capacitors, 2 resistors, 2 connectors, 1 IC and 1 diode.

README

README.md

ProjectApollo

This Github repository contains Designs/docs/software/PCB for Project Apollo (open source oxygen concentrator)

For more context behind the history/goals/motivation for this project please see our coverage in Helpful Engineering blog:

Update: check out our presentation at RespiCon 2021!

Apollo v2 build instructions

Why

  • Ventilators need oxygen! (typical FiO2 0.4 … 0.9)
  • Oxygen generation is a big problem in developing countries.
    • No established infrastructure.
    • Oxygen bottles are expensive
  • People are already looking at alternative (local) ways for producing oxygen

What

  • Goal of the Apollo prototype = enabling people around the world to build the prototype as fast as possible
  • Focus = Simplicity and speed of build
  • Final goal = Enable people to iterate and publish their own designs in the community

How

  • Follow the published build documentation
  • Buy/source the materials (check out the BOM)
  • Build the prototype
  • Validate O2 concentration and flow. Use a good O2 and flow sensor.
  • Think about risk analysis and assessment: template for Apollo-derived design
  • Document and iterate your own design. Publish your findings to the community!

Target

  • Output medical grade Oxygen ideally at 93%
  • Flow rate of 1-20 liters per minute (5 l/m being standard for oxygen therapy)

Building instructions (prototype v2)

Youtube videos

Parts

10
QtyValueFootprintReferences
110 uFCapacitors_SMD:C_1206C1
1130KResistors_SMD:R_0805R1
115KResistors_SMD:R_0805R2
12.2 uFboost:C_1206C2
122 uH, 1.9Amanuf.pretty:MURATA-DG6050CL1
140V, 1.1Aw_smd_diode.pretty:do219abD1
1INPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJ1
1MIC2250lms6002-pmod.pretty:SOT-753_(TSOP-5)_HandsolderingU1
1OSHW-logo_silkscreen-back_5mmOSHW-logo:OSHW-logo_silkscreen-back_5mmG***
1OUTPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJ2

Questions

How big is the Mic2250 boost 01 PCB?

It measures 21.6 × 20.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mic2250 boost 01 use?

10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mic2250 boost 01 KiCad files?

From the oxycon/ProjectApollo repository on GitHub, at the commit this page was made from: the board is electrical/mic2250/mic2250_boost_01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mic2250 boost 01 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

Similar boards

  • 2 layers57 × 55.2 mmLogicAnalyzer, the printed circuit board in 3D

    LogicAnalyzer

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    10 parts5.1kGPL-3.0
  • 2 layers32.2 × 15.4 mmProtector, the printed circuit board in 3D

    Protector

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    10 parts4.3kMIT
  • 2 layers26 × 18 mmConn, the printed circuit board in 3D

    Conn

    yaqwsx/KiKit

    Automation tools for KiCAD

    10 parts2.1kMIT
  • 2 layers44.3 × 30.5 mmLime2-SATA RevA, the printed circuit board in 3D

    Lime2-SATA RevA

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    10 parts1.5k
  • 2 layers17.8 × 43.2 mmNano Adapter, the printed circuit board in 3D

    Nano Adapter

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    10 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    10 parts1kGPL-3.0