Skip to the content
2 layers85.2 × 58.3 mmLoad cell, the printed circuit board in 3D

files that sit in linuxcnc/config for the laser

Size
85.2 × 58.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
40
Pads
104
Tracks, vias
201, 11
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
23 Nov 2013
Updated
26 Nov 2024

Overview

Load cell is an open-source printed circuit board by owhite, from the owhite/LASER_ENVIROMENT repository on GitHub. It is a 2-layer board of 85.2 × 58.3 mm with 30 parts on 40 nets, routed with 201 tracks and 11 vias.

It is built around the CDS-13138-SMT-TR and RJ45. Its parts include 12 resistors, 5 diodes, 1 IC, 1 transistor and 1 connector. It belongs with the sensors and measurement boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

2

Parts

30
QtyValueFootprintReferences
74.7kResistor_SMD:R_0805_2012MetricR1, R2, R3, R6, R7, R9, R10
5LEDLED_SMD:LED_0805_2012MetricD1, D2, D3, D4, D5
210kResistor_SMD:R_0805_2012MetricR4, R8
2Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalDETECTORS1, GECKO1
1100Resistor_SMD:R_0805_2012MetricR5
150kResistor_SMD:R_0805_2012MetricR11
162kResistor_SMD:R_0805_2012MetricR12
1BUZ11Package_TO_SOT_THT:TO-220-3_VerticalQ1
1CDS-13138-SMT-TRCDS-13138-SMT-TR:CDS13138SMTTRLS1
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalPWR1
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalSWITCH1
1RJ45Connector_RJ:my_RJ45_AmphenolJ1
1SW_PushButton_Switch_SMD:SW_SPST_TL3342PB1
1Teensy3.2teensy:Teensy32U1

The 26 most common of 30 parts.

More from owhite/LASER_ENVIROMENT

1
  • 2 layers65.5 × 45.7 mmLaser flow, the printed circuit board in 3D

    Laser flow

    owhite/LASER_ENVIROMENT

    files that sit in linuxcnc/config for the laser

    17 parts

Similar boards

  • 4 layers82.8 × 88.9 mmMetal detector test, the printed circuit board in 3D

    Metal detector test

    bobasaurus/lumber-plunder-metal-detector

    A VLF induction balance metal detector with a wooden body

    111 parts11GPL-3.0
  • 2 layers50.8 × 50.8 mmELEC 240 Project, the printed circuit board in 3D

    ELEC 240 Project

    helenaw041/ELEC-240-PCBs

    PCBs I'm making in ELEC 240 lab class!

    46 parts
  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 4 layers84 × 82 mmToad, the printed circuit board in 3D

    Toad

    travisgoodspeed/goodfet

    An embedded bus adapter for various microcontrollers and radios.

    241 parts333
  • 2 layers100 × 100 mmCANBuster, the printed circuit board in 3D

    CANBuster

    GBert/misc

    miscellaneous stuff / unsorted

    182 parts99
  • 2 layers50 × 55.4 mmCasserole, the printed circuit board in 3D

    Casserole

    puddly/casserole

    Control GE appliances

    23 parts94Apache-2.0
  • 2 layers67.9 × 47.8 mmPlatine, the printed circuit board in 3D

    Platine

    nv1t/standing-desk-interceptor

    I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project

    11 parts52CC0-1.0
  • 4 layers90 × 75 mmCM4 2 Backup, the printed circuit board in 3D

    CM4 2 Backup

    olvint/CM4-NAS-MiniPCIE

    Raspberry Pi CM4 based NAS solution board

    21 parts51

Questions

How big is the Load cell PCB?

It measures 85.2 × 58.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Load cell use?

30 parts, built around the CDS-13138-SMT-TR and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Load cell KiCad files?

From the owhite/LASER_ENVIROMENT repository on GitHub, at the commit this page was made from: the board is PCBs/load_cell_V2.0/load_cell.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Load cell design in my own project?

Its repository states no licence, so its author keeps all rights: ask owhite before reusing the design.