Skip to the content
2 layersAtmega328, the printed circuit board in 3D

QS165 encoder based on the AS5047 chip.

Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
42
Pads
111
Tracks, vias
198, 28
Pours
6
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
11 Oct 2022
Updated
10 Feb 2023

Overview

Atmega328 is an open-source printed circuit board by owhite, from the owhite/QS165_encoder repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 30 parts on 42 nets, routed with 198 tracks and 28 vias.

It is built around the ATMEGA328P-AU, AS5048A and BZV55C6V2, with the SI2319CDS among its other parts. Its parts include 9 capacitors, 6 connectors, 3 resistors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

4

README

AS5048_atmega328p/README.md

QS165 Motor Encoder with hall output

Project area for an encoder retrofit for the QS165 motor with a magnetic sensor that produces hall output.

See the firmware directory to run the atmega.

Parts

30
QtyValueFootprintReferences
4100nCapacitor_SMD:C_0402_1005MetricC3, C4, C5, C8
220pCapacitor_SMD:C_0402_1005MetricC6, C7
110Capacitor_SMD:C_0402_1005MetricC9
1100kResistor_SMD:R_0603_1608MetricR1
1100nCapacitor_SMD:C_0603_1608MetricC1
110kResistor_SMD:R_0603_1608MetricR2
120kResistor_SMD:R_0603_1608MetricR3
14.7Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC2
1AS5048APackage_SO:TSSOP-14_4.4x5mm_P0.65mmU2
1ATmega328P-AUPackage_QFP:TQFP-32_7x7mm_P0.8mmU1
1BZV55C6V2Diode_SMD:D_MiniMELFD1
1Conn_01x02Connector_PinHeader_2.54mm:myPinHeader_1x02_P2.54mm_VerticalJ2
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1Conn_01x02_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ5
1Conn_02x03_Top_BottomConnector_PinSocket_2.54mm:isp_6pinISP1
1CrystalCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mmY1
1LOGO431181015816:monkeyG***
1RED_LEDLED_SMD:LED_0603_1608MetricD2
1Si2319CDSPackage_TO_SOT_SMD:SOT-23Q1
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1

The 27 most common of 30 parts.

More from owhite/QS165_encoder

2
  • 4 layers78.9 × 55.9 mmEncoder driver, the printed circuit board in 3D

    Encoder driver

    owhite/QS165_encoder

    QS165 encoder based on the AS5047 chip.

    44 parts1GPL-3.0
  • 2 layersAtmega328, the printed circuit board in 3D

    Atmega328

    owhite/QS165_encoder

    QS165 encoder based on the AS5047 chip.

    22 parts1GPL-3.0

Similar boards

  • 2 layers78.7 × 53.6 mmMain Board old, the printed circuit board in 3D

    Main Board old

    jayalcock/Clocks

    A million times clock project

    27 parts
  • 2 layers42 × 48 mmKERISE, the printed circuit board in 3D

    KERISE

    kerikun11/micromouse-kerise-v3

    MicroMouse KERISE v3

    130 parts32
  • 4 layers30.2 × 20.5 mmBLDCM MCU, the printed circuit board in 3D

    BLDCM MCU

    brenocq/bldc-motor

    High-precision BLDC motor and controller development from scratch (in progress...)

    91 parts13MIT
  • 2 layers40 × 44 mmKERISE, the printed circuit board in 3D

    KERISE

    kerikun11/micromouse-kerise-v4

    MicroMouse KERISE v4

    105 parts11
  • 2 layers35.6 × 45.7 mmAs5048, the printed circuit board in 3D

    As5048

    ZoetropeLabs/as5048A-breakout-board

    A breakout board for the Austria Microsystems AS5048A angle sensor

    23 parts7MIT
  • 2 layers83 × 95 mmPane2, the printed circuit board in 3D

    Pane2

    meerstern/Encoder_TSSOP14

    Encoder Board For AMS AS5048A, AS5047D and others with SPI interface.

    325 parts4

Questions

What parts does the Atmega328 use?

30 parts, built around the ATMEGA328P-AU, AS5048A, BZV55C6V2 and SI2319CDS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Atmega328 KiCad files?

From the owhite/QS165_encoder repository on GitHub, at the commit this page was made from: the board is AS5048_atmega328p/atmega328.kicad_pcb and its schematic AS5047_atmega328p/atmega328.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Atmega328 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).