2 layers
10knobs PT8211
tomcombriat/TES_10-knobs-synth
Software and hardware files for the TES 10k synths serie, cheap synthesizer powered with Mozzi using a STM32 BluePill as its main chip
48 parts9GPL-3.0
2 layers53.7 × 37 mm
Light controller
owencho/STM-Light-Controller-PCB- Size
- 53.7 × 37 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 39
- Pads
- 144
- Tracks, vias
- 468, 51
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Mar 2020
- Updated
- 31 Dec 2020
Overview
Light controller is an open-source printed circuit board by owencho, from the owencho/STM-Light-Controller-PCB repository on GitHub. It is a 2-layer board of 53.7 × 37 mm with 42 parts on 39 nets, routed with 468 tracks and 51 vias.
It is built around the STM8S003F3P6, LM358 and PT8211-S, with the EL357N(C)(TA)-G, AMS1117-5.0 and 1N5819HW among its other parts. Its parts include 14 resistors, 14 ICs, 10 capacitors and 3 diodes. It belongs with the STM8 boards of this library.
Main components
6
STM8S003F3P6
TSSOP-20-40℃~+85℃ 10bit 128Byte 16 16MHz 1KB 2.95V~5.5V 8 Bit 8KB Built-in FLASH STM8 TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
PT8211-S
SOP-8-150mil16 2 3.3V Serial SOP-8-150mil Digital to Analog Converters (DAC) ROHSPTCDigital To Analog Converters (DAC)
EL357N(C)(TA)-G
SOP-4-2.54mm-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 200% 200mW 3.75kV 3us 400% 4us 50mA 50mA 6V 80V DC Phototransistor SOP-4-2.54mm Transistor, Photovoltaic Output Optoisolators ROHSEverlight ElectronicsTransistor, Photovoltaic Output Optoisolators
AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
1N5819HW
SOD-123-65℃~+150℃ 1 Independent 1A 1mA@40V 25A 40V 450mV@1A SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R8, R9, R10, R12, R13, R14 |
| 9 | C | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C8, C9, C10 |
| 4 | PH2.0_horizontal | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | U9, U10, U11, U12 |
| 2 | BZX84Cxx | Diode_SMD:D_SOT-23_ANK | D2, D3 |
| 2 | EL357N-C | Package_SO:SOP-4_3.8x4.1mm_P2.54mm | U7, U8 |
| 1 | 0.01Ω | Resistor_SMD:R_1210_3225Metric | R7 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 1N5819HW | Diode_SMD:D_SOD-123 | D1 |
| 1 | 470uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C7 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | PT8211-S | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | PinSocket_1x4 | Custom_footprint_lib:custom_pinsocket_1x04_p2.54 | U13 |
| 1 | SMD2063 | Custom_footprint_lib:SMD2063 | U14 |
| 1 | SMD_2062 | Custom_footprint_lib:LEDSMD2062 | U4 |
| 1 | STM8S003F3P | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | tact_sw | Button_Switch_SMD:SW_SPST_SKQG_WithStem | U5 |
Similar boards
- 2 layers159.5 × 99.5 mm
PLL AM OSC 1 5a
Gloeidraad/AMFM-modulator-with-ESP32-module
This is an MP3 player, Web-radio player, Bluetooth player, and simple waveform generator, based on an ESP32 module. The output is connected to a simple FM/AM modulator.
168 parts - 2 layers212.5 × 79.1 mm
- 2 layers39.4 × 47 mm
Solenoid Driver Board
benvonhandorf/waterdisplay
Water Display is intended to be an open source project combining electronics, embedded software and water to create a small water display for our small pond.
35 parts - 2 layers30 × 110 mm
- 2 layers93 × 61 mm
Zero crossing detector
cs2dsb/zcssr
A PCB and software for a SSR controller that monitors mains AC zero crossings to determine when to turn the SSR on.
98 parts10Apache-2.0 - 2 layers130 × 110 mm
3D Printer Mainboard STM32
m47812/Custom-3D-Printer-Controller
A fully custom 3D Printer controller board based on an stm32f7 controller with TMC2209 stepper drivers
191 parts10GPL-3.0 - 4 layers185 × 110 mm
Bd845-pwb
bluedot-arcade/bd845-pwb-board
A clone of the original Konami GN845-PWB(B) Stage I/O board for DDR machines.
186 parts4CERN-OHL-S-2.0
Questions
How big is the Light controller PCB?
It measures 53.7 × 37 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Light controller use?
42 parts, built around the STM8S003F3P6, LM358, PT8211-S and EL357N(C)(TA)-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Light controller KiCad files?
From the owencho/STM-Light-Controller-PCB repository on GitHub, at the commit this page was made from: the board is Light_controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Light controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask owencho before reusing the design.