2 layers50.8 × 99.1 mm
2 layers
Fourars
otherchris/modules- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 55
- Pads
- 228
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Oct 2023
- Updated
- 30 Oct 2023
Overview
Fourars is an open-source printed circuit board by otherchris, from the otherchris/modules repository on GitHub. It is a 2-layer board with 72 parts on 55 nets.
Its parts include 16 resistors, 16 diodes, 8 capacitors, 8 connectors and 4 switches.
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D5, D6, D7, D9, D10, D11, D13, D14, D15 |
| 8 | PJ398SM-12 | AudioJacks:THONK_PJ398SM-12 | J1, J2, J3, J4, J5, J6, J7, J8 |
| 8 | R_Potentiometer | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 |
| 8 | c=1u | Capacitor_THT:C_Rect_L7.2mm_W5.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1, C2, C3, C4, C5, C6, C7, C8 |
| 8 | r=100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R1, R3, R5, R7, R9, R11, R13, R15 |
| 4 | LED | LED_THT:LED_D5.0mm_FlatTop | D4, D8, D12, D16 |
| 4 | SW_SPDT | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 4 | r=1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R4, R8, R12, R16 |
| 4 | r=47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R2, R6, R10, R14 |
| 3 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket | U1, U2, U3 |
| 2 | 0.1u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | POWER_C3, POWER_C4 |
| 2 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | POWER_R1, POWER_R2 |
| 2 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | POWER_D1, POWER_D2 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | POWER_J1 |
| 1 | c=47u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | POWER_C1 |
| 1 | c=47u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | POWER_C2 |
Questions
What parts does the Fourars use?
72 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fourars KiCad files?
From the otherchris/modules repository on GitHub, at the commit this page was made from: the board is IS-1/fourars/fourars.kicad_pcb and its schematic Gates Out/Gates Out.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fourars design in my own project?
Its repository states no licence, so its author keeps all rights: ask otherchris before reusing the design.
More from otherchris/modules
1Similar boards
- 2 layers50 × 90 mm
Hackholidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
72 parts915 - 2 layers59.9 × 82.5 mm
Centronics 50Pin
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
72 parts459GPL-3.0 - 2 layers45.7 × 168.3 mm
- 2 layers152.4 × 101.6 mm
8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset
72 parts412GPL-3.0 - 2 layers80.8 × 50.8 mm
- 2 layers23 × 120 mm
- 2 layers237.5 × 102.9 mm
Serial
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
72 parts301Unlicense - 2 layers109.2 × 78.7 mm
Duo Adapter V0.5
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
72 parts282