

- Size
- 90 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 132
- Nets
- 79
- Pads
- 332
- Tracks, vias
- 515, 71
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 12 Apr 2025
- Updated
- 2 Nov 2026
Overview
PEKG is an open-source printed circuit board by ostojaatanasijevic, from the ostojaatanasijevic/EKG repository on GitHub. It is a 2-layer board of 90 × 45 mm with 132 parts on 79 nets, routed with 515 tracks and 71 vias.
It is built around the NE5532, OP07 and 74HC14, with the BQ21040DBV, 1N4148WS and AO3400A among its other parts. Its parts include 43 capacitors, 33 resistors, 11 diodes, 8 ICs and 6 transistors. It belongs with the ESP32 boards of this library.
Main components
9NE5532
SOP-8-22V~22V 0℃~+70℃ 100dB 10nA 14mA 2 40V/us 42mA 4mV 800nA 8nV/√Hz@30Hz Built-in compensation SOP-8 Operational Amplifier ROHSSungineOperational AmplifierOP07
SOP-8-20℃~+85℃ -22V~-3V、3V~22V 1 1.8nA 1.8uV/℃ 10nV/√Hz@1kHz 120dB 15pA/℃ 170V/ms 2.7mA 22V 500kHz 60uV 800pA SOP-8 Operational Amplifier ROHSSlkorOperational Amplifier74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInvertersBQ21040DBV
SOT-23-60℃~+125℃ 1 125uA 3.5V~28V 4.2V 800mA Charging IC Support SOT-23-6 Battery Management ROHSTexas InstrumentsBattery Management1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
README
README.mdPEKG - Petnički EKG

Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10u | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C1, C2, C10, C41, C43, C49, C50, C51, C52, C53, C54, C55, C56, C57, C58, C65 |
| 13 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C6, C8, C31, C32, C33, C34, C35, C42, C44, C45, C60 |
| 13 | TestPoint | TestPoint:TestPoint_Pad_D3.0mm | TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP18, TP19 |
| 10 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R10, R11, R25, R26, R40, R41, R44, R45, R46 |
| 8 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R5, R6, R9, R12, R15, R16 |
| 6 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R37, R38, R53, R54, R55 |
| 6 | 1N4148WS | Diode_SMD:D_SOD-323 | D8, D9, D10, D11, D12, D13 |
| 5 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C26, C27, C28, C29 |
| 4 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C15, C16, C25 |
| 4 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q3, Q5, Q13, Q14 |
| 4 | TestPoint_Alt | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1, TP2, TP14, TP15 |
| 3 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R49, R50, R51 |
| 3 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP3, JP9, JP10 |
| 2 | 100p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C7 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C40, C46 |
| 2 | 200k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q8, Q10 |
| 2 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D1, D2 |
| 2 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4, JP5 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad_TopOnly | H1, H3 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad_TopBottom | H2, H4 |
| 2 | NE5532 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U5 |
| 2 | OP07 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U3 |
| 1 | 1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | 1Meg | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R60 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D4 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 2.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30 |
| 1 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U7 |
| 1 | AP9101CK6 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U11 |
| 1 | BQ21040DBV | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | Battery_Cell | PEKG:battery_holder | BT2 |
| 1 | EKG input | PEKG:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J2 |
| 1 | ESP32-S3-ZERO | PEKG:MODULE_ESP32-S3-ZERO_SMD | U2 |
| 1 | GREEN_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | LOGO | logo:logo | G*** |
| 1 | Micro_SD_Card_Module | PEKG:Micro_SD_Card_Module_UpsideDown_SMD | J3 |
| 1 | RED_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | SW_DPDT_x2 | PEKG:SW_EG1271 | SW2 |
Similar boards
- 2 layers80 × 100 mm

- 2 layers80 × 100 mm

- 2 layers100 × 100 mm

- 4 layers115.5 × 96.2 mm

Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
245 parts19 - 4 layers63.6 × 86 mm

BECom
rjsc/BECom
BECom - Battery Emulator Companion - Open Source Hardware, designed to run dalathegreat/Battery-Emulator
276 parts2GPL-3.0 - 2 layers66 × 67 mm

AC Controller
Qeteshpony/AC-Controller
Universal WiFi-Based remote control for IoT Devices
88 partsBSD-2-Clause - 4 layers90 × 61.5 mm

- 2 layers38.1 × 110.5 mm

Questions
How big is the PEKG PCB?
It measures 90 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PEKG use?
132 parts, built around the NE5532, OP07, 74HC14 and BQ21040DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PEKG KiCad files?
From the ostojaatanasijevic/EKG repository on GitHub, at the commit this page was made from: the board is PEKG.kicad_pcb and its schematic EKG-lion-lion_powered/PEKG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PEKG design in my own project?
Its repository states no licence, so its author keeps all rights: ask ostojaatanasijevic before reusing the design.