

Register general
Educational 8 bit CPU
- Size
- 75 × 28 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 34
- Pads
- 149
- Tracks, vias
- 309, 126
- Pours
- 241
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Feb 2026
- Updated
- 2 Nov 2026
Overview
Register general is an open-source printed circuit board by ostertag, from the ostertag/edu8 repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 75 × 28 mm with 42 parts on 34 nets, routed with 309 tracks and 126 vias.
It is built around the 74HC245D and 74HC377D. Its parts include 11 resistors, 10 diodes, 3 capacitors, 2 ICs and 2 connectors.
Main components
274HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74HC377D
SO-20-300mil-40℃~+125℃ 1 12ns 16ns@4.5V,50pF 2V~6V 3.5pF 3ns 4mA 4mA 74HC Series 77MHz 8 8uA D-Type Enable Rising Edge SOIC-20-300mil Flip Flops ROHSNexperiaFlip Flops
README
README.mdedu8
Educational 8 bit CPU
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 8 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4 |
| 4 | ToolingHole | MountingHole:ToolingHole_1.152mm | H3, H4, H5, H6 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 74HC245 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U1 |
| 1 | 74HC377 | 8-bit_computer:SO-20_5.3x12.6mm_P1.27mm | U2 |
| 1 | Conn_01x16_Pin | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x16_Pin | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Horizontal | J1 |
| 1 | IN | LED_SMD:LED_0805_2012Metric | D9 |
| 1 | OUT | LED_SMD:LED_0805_2012Metric | D10 |
| 1 | TestPoint | 8-bit_computer:TestPoint_Slot_2.2x0.8mm | TP5 |
| 1 | Val** | 8-bit_computer:by-nc-sa.eu | Ref** |
More from ostertag/edu8
8- 2 layers

- 2 layers100 × 60 mm

- 2 layers100 × 70 mm

- 2 layers100 × 50 mm

- 2 layers90 × 45 mm

- 2 layers80 × 40 mm

- 2 layers70 × 39 mm

- 2 layers100 × 70 mm

Similar boards
- 2 layers245.1 × 160 mm

8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers208.9 × 170.8 mm

8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-3
Version 3 of my educational DIY TTL computer built around a UART serial interface - now with blinkenlights!
207 parts54 - 4 layers158.8 × 104.1 mm

- 2 layers

BreadBin
c0pperdragon/BreadBin
A CPU made of 7400 logic on breadboards - inside a bread bin ;-)
45 parts18 - 2 layers110 × 110 mm

Custom cpu
axelo/custom-cpu
Cutom CPU built from 7400-series integrated circuits (and FLASH roms)
47 partsMIT - 2 layers139.7 × 55.9 mm

- 4 layers100 × 100 mm

- 4 layers220 × 170 mm

Arpeggiator
EwoudVV/arpeggiator
12-note analog arpeggiator with a 1/2/3 octave range, custom pcb and printed case
360 parts3
Questions
How big is the Register general PCB?
It measures 75 × 28 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Register general use?
42 parts, built around the 74HC245D and 74HC377D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Register general KiCad files?
From the ostertag/edu8 repository on GitHub, at the commit this page was made from: the board is CAD/register_general/register_general.kicad_pcb and its schematic CAD/alu/alu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Register general design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).