

Climate control
Control the climate in your boot!
- Size
- 18 × 55 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 35
- Nets
- 55
- Pads
- 196
- Tracks, vias
- 282, 55
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Feb 2021
- Updated
- 31 Dec 2023
Overview
Climate control is an open-source printed circuit board by oskarengdahl, from the oskarengdahl/climate_control repository on GitHub, published under the MIT licence. It is a 2-layer board of 18 × 55 mm with 35 parts on 55 nets, routed with 282 tracks and 55 vias.
It is built around the ATMEGA328PB-AU, TPS61230DRC and TP4056, with the XB8089A and NTR3C21NZT1G among its other parts. Its parts include 13 resistors, 10 capacitors, 5 connectors, 4 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA328PB-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 27 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TPS61230DRC
VSON-10-EP(3x3)-40℃~+125℃ 1 2.3V~5.5V 2.5V~5.5V 2MHz 4A 60uA Adjustable Boost Boost Built-in Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementXB8089A
SOP-8-EP2V~6V SOP-8-EP Battery Management ROHSXySemiBattery Protection ICsNTR3C21NZT1G
SOT-23-55℃~+150℃ 1 N-channel 1.16nF 1.4W 10nC@4.5V 140pF 1V 20V 22mΩ@4.5V 6.5A SOT-23 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdBoot Climate Control
Created by Benjamin Lundgren & Oskar Johansson
Based on Ski boots hearing system.
Goals
The goal of the Boot Climate Control (BCC)
- Never ever freeze in the boots
- Warm for ~8hDirectories
climate_control
├── document # Generic document folder
│ ├── datasheet # Datasheet for hardware components
├── hardware
│ ├── cad # 3D models
│ │ └── stl # 3D print files
│ ├── pcb # Schematic, layout and production files
│ │ └── gerber # Production files
│ │ └── library # Library for project
├── img
└── software # Firmware filesUsage
Description about how to use the BCC
License
This template is created with MIT license.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C4, C7, C8, C10 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C6, C11 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R3, R15 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R14 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R9, R13 |
| 2 | R_Small | Resistor_SMD:R_0402_1005Metric | R17, R18 |
| 2 | x | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 18nF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 1uH | climate_control:Inductor_0530 | L1 |
| 1 | 2.4k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 30k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | ATmega328PB-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U3 |
| 1 | BatteryIn | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | CHRG | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | HeatElement | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | NTR3C21NZ | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Switch | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | TP4056 | climate_control:SOP8-EPAD | U1 |
| 1 | TPS61230DRC | Package_SON:Texas_S-PVSON-N10_ThermalVias | U4 |
| 1 | USB_C | climate_control:HRO_TYPE-C-31-M-12 | J3 |
| 1 | XB8089A | climate_control:SOP8-EPAD | U2 |
Similar boards
- 4 layers144 × 133 mm

- 4 layers95 × 130 mm

ProPrj Segun O pcb fiverr 2026-03-03
keycard-tech/keycard-shell
Modular, fully open hardware wallet
157 parts87MIT - 2 layers30.5 × 15.2 mm

Avr attiny1614-mini
vladbelous/avr-attiny1614-mini
AVR attiny1614 (tinyAVR 1-series) mini board
26 parts4 - 2 layers192.5 × 165 mm

- 4 layers150 × 50 mm

TiepieLCR
martijnschouten/tiepielcr-hardware
Contains the design files of the TiePieLCR multi-frequency spectrometer front-end
241 partsGPL-3.0 - 2 layers129.7 × 60 mm

Carte Capteurs
INSA-GEI/insa-nxpcup
Dépôt du département GEI de l'INSA Toulouse pour la compétition NXPCup
52 parts9GPL-3.0 - 4 layers43.6 × 32.9 mm

Wii reg
Gmanmodz/RVL-Power-Management-System
A complete battery management and custom regulator system for a Wii portable
94 parts77 - 2 layers112.6 × 42.6 mm

Questions
How big is the Climate control PCB?
It measures 18 × 55 mm and has 2 copper layers, 1 mm thick.
What parts does the Climate control use?
35 parts, built around the ATMEGA328PB-AU, TPS61230DRC, TP4056 and XB8089A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Climate control KiCad files?
From the oskarengdahl/climate_control repository on GitHub, at the commit this page was made from: the board is hardware/pcb/climate_control.kicad_pcb and its schematic hardware/pcb/climate_control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Climate control design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).