Skip to the content
2 layers80 × 45 mm.kicad_pcb, the printed circuit board in 3D

Rounter for makers.

Size
80 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
126
Nets
92
Pads
439
Tracks, vias
1,323, 76
Pours
13
Routed
Yes
KiCad
KiCad 3
Created
3 Dec 2014
Updated
26 Feb 2015

Overview

.kicad_pcb is an open-source printed circuit board by oshwlab, from the oshwlab/MakerRouter repository on GitHub. It is a 2-layer board of 80 × 45 mm with 126 parts on 92 nets, routed with 1,323 tracks and 76 vias.

It is built around the DLW21SN900SQ2, IP4220CZ6 and AP1212LSL, with the HR911105A, BLM21PG221SN1 and PAD1 among its other parts. Its parts include 42 capacitors, 23 resistors, 19 ICs, 19 inductors and 12 connectors.

Main components

6

README

README.md

hardware:目录下为硬件设计文件

Parts

126
QtyValueFootprintReferences
170.1uFC_C_0603C14, C15, C17, C18, C20, C21, C22, C25, C26, C27, C28, C29, C30, C39, C40, C41 +1
9BLM21PG221SN1rcl-L0805L3, L6, L7, L8, L9, L10, L11, L12, L13
832OHM/BEADrcl-L0805L2, L4, L5, L14, L15, L16, L18, L19
8PAD_1PAD_1P6, P6, P6, P6, P6, P6, P6, P6
510KC_R_0603R8, R17, R18, R19, R20
5DLW21SN900SQ2DLW21SN900SQ2U2, U5, U7, U9, U10
5IP4220CZ6IP4220CZ6_SOT23_6U3, U11, U12, U13, U14
449.9C_R_0603R3, R4, R21, R22
4510KC_R_0603R13, R14, R15, R16
468uFC_CPOL_SMCBC31, C32, C33, C34
4IO_USB_A_90IO-USB-AU8, U17, U18, U19
3104C_C_0603C5, C11, C35
34.7uFC_C_0603C8, C16, C19
210uFC_CPOL_SMCAC37, C38
212pC_C_0603C23, C24
21uFC_C_0603C12, C13
2AP1212AP1212_SOP8U15, U16
2IO_FM13X2IO_FM13X2JP1, JP2
2IO_HOLE-3.2IO_HOLE-3.2P2, P3
2LOGOLOGOG***, G***
2MLCC_C3216X7R1E106KT/10uF/4.5Vrcl-C1206C10, C36
10.1UFC_C_0603C4
1100KC_R_0603R2
1100NC_C_0603C3
110K/1%C_R_0603R6
110NFC_C_0603C9
110kC_R_0603R9
110uHrcl-L0603L17
115kC_R_0603R10
12.43k/1%C_R_0603R11
1220C_R_0603R1
122uFC_C_0603C6
126.1K/1%C_R_0603R7
133C_R_0603R12
1330C_R_0603R23
1470uF/6.3VC_CPOL_SMCEC1
16.8KC_R_0603R5
16.8NFC_C_0603C7
1CDRH74NP-100MC/10uH/4Arcl-L7070L1
1C_B130_13_F_SMAC_B130D2
1C_CRY_5.0-3.2C_CRY_5.0-3.2X1
1FPC-16PINFPC-16PINJP4
1GreenC_LED_0805LED1
1HR911105AHR911105AU6
1IC_MP1484EN_SOIC08IC_MP1484EN_SOIC08U1
1IO_FFC_4_2MMIO_FFC_4_2MMJP3
1IO_USB-MICRO-BIO_USB-MICRO-B-BJ1
1MLCC_C3216X7R1E475K/4.7uF/25Vrcl-C1206C2
1PINHOLEIO_HOLE-3.2P3
1UPD720114-QFP48UPD720114-QFP48U4
1WRTNodeWRTNodeVAL
1mini6mini6VAL

More from oshwlab/MakerRouter

3
  • 2 layers146 × 127 mmMT7620N, the printed circuit board in 3D

    MT7620N

    oshwlab/MakerRouter

    Rounter for makers.

    176 parts7
  • 2 layers36 × 24 mmButton, the printed circuit board in 3D

    Button

    oshwlab/MakerRouter

    Rounter for makers.

    11 parts7
  • 2 layers36 × 24 mmLED, the printed circuit board in 3D

    LED

    oshwlab/MakerRouter

    Rounter for makers.

    11 parts7

Similar boards

  • 4 layers50 × 56 mmVocore, the printed circuit board in 3D

    Vocore

    oshwlab/osbean-board

    Boards for OSBean.

    128 parts4
  • 2 layers70 × 52 mmBmstuCtrl, the printed circuit board in 3D

    BmstuCtrl

    Kreyl/BmstuCtrl

    82 parts1
  • 2 layers46.2 × 16.2 mmUsb2Uart, the printed circuit board in 3D

    Usb2Uart

    Kreyl/Usb2Uart

    46 parts
  • 2 layers50.3 × 17.5 mmMP2617B, the printed circuit board in 3D

    MP2617B

    ElessarCuthalion/Modules

    Small PCB modules: Sensors, Chargers, etc...

    43 parts
  • 4 layers81 × 90.3 mmMildly Overkill, the printed circuit board in 3D

    Mildly Overkill

    hackepeter101/Mildly-Overkill

    todo.md was written entirely by AI. It's the list of everything it found. I read the suggestions, double-check them, and then fix them myself in KiCad, usually while muttering.

    138 parts1
  • 4 layers118 × 93 mmNRF9161-v2-panel, the printed circuit board in 3D

    NRF9161-v2-panel

    anand2532/nRF9161-DEV-BOARD

    A small 50 × 37.5 mm LTE-M / NB-IoT + GNSS modem board built around the Nordic nRF9161. Any host MCU controls it with AT commands over one 10-pin UART header.

    474 parts
  • 2 layers30.9 × 52.2 mmC4NDY XMOS, the printed circuit board in 3D

    C4NDY XMOS

    yamamo2shun1/C4NDY_XMOS

    67 partsMIT

Questions

How big is the .kicad_pcb PCB?

It measures 80 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the .kicad_pcb use?

126 parts, built around the DLW21SN900SQ2, IP4220CZ6, AP1212LSL and HR911105A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the .kicad_pcb KiCad files?

From the oshwlab/MakerRouter repository on GitHub, at the commit this page was made from: the board is hardware/MR808/.kicad_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the .kicad_pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask oshwlab before reusing the design.