oscimp/wr_acorn12White Rabbit time and frequency transfer on the Artix7 of the Acorn CLE125
RPI5-CFE Hat is an open-source printed circuit board by oscimp, from the oscimp/wr_acorn repository on GitHub, published under the AGPL-3.0 licence. It is a 4-layer board of 98.2 × 56 mm with 55 parts on 69 nets, routed with 517 tracks and 175 vias.
It is built around the LM1117MP-1.8 and PCA9306D. Its parts include 21 resistors, 11 capacitors, 4 connectors, 3 ICs and 2 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 4k7 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R4, R5, R6, R8, R9, R13 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP2, TP3, TP4, TP5, TP8 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H3, H4, H5 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C6, C8 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R20, R23 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10, C11 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C7 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | FerriteBead | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2 |
| 2 | NC | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP_3V1, TP1 |
| 1 | 1.5uH | Inductor_SMD:L_Vishay_IHLP-2020 | L1 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R21 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 137K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15 |
| 1 | 30K | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | Bus_M.2_Socket_M | MyKiCadLibs:Conn_TE-M.2-0.5-67P-doublesided | J3 |
| 1 | Conn_01x16_Shielded | Connector_FFC-FPC:Hirose_FH12-16S-0.5SH_1x16-1MP_P0.50mm_Horizontal | J1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J5 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LM1117MP-1.8 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | PCA9306 | Package_SO:Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm | U2 |
| 1 | Red | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | SFP | Connector:Connector_SFP_and_Cage | J2 |
| 1 | TPS564242DRLR | footprint:TPS564242DRLR_TEX | U1 |
It measures 98.2 × 56 mm and has 4 copper layers, 1.6 mm thick.
55 parts, built around the LM1117MP-1.8 and PCA9306D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the oscimp/wr_acorn repository on GitHub, at the commit this page was made from: the board is RPi_HAT/RPI5-CFE-Hat.kicad_pcb and its schematic RPi_HAT/RPI5-CFE-Hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
PavitpalSingh2004/TRUESENSE_V2
TrueSense V2 is a compact high-speed reflection spectrometer using the Hamamatsu C12880MA, ESP32-S3, custom PCBs, high-speed ADC acquisition, FT2232H USB, Wi-Fi/UDP streaming, and a PyQt6 GUI for real-time spectrum…
Masaharu41/Midi-Bass-Guitar
A repository for all design work, assembly, and schematics for a robotic bass guitar programmed with MIDI
CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.
juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection
