

InstrumentV3
Four point probe for semiconductor instrumentation system
- Size
- 116.5 × 152.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 57
- Pads
- 190
- Tracks, vias
- 373, 19
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Apr 2026
- Updated
- 6 Jun 2026
Overview
InstrumentV3 is an open-source printed circuit board by orpheus016, from the orpheus016/four-point-probe repository on GitHub, published under the MIT licence. It is a 2-layer board of 116.5 × 152.5 mm with 71 parts on 57 nets, routed with 373 tracks and 19 vias.
It is built around the OP07CP, SRD-12VDC-SL-C and B2B-XH-A, with the TL431ACLP and B4B-ZR among its other parts. Its parts include 12 resistors, 12 connectors, 5 ICs, 4 switches and 2 capacitors.
Main components
5OP07CP
PDIP-8-18V~-3V、3V~18V 0.3V/us 0℃~+70℃ 1 1.8nA 10.5nV/√Hz@10Hz 120dB 500nV/℃ 600kHz 60uV 800pA Built-in compensation PDIP-8 Precision Op Amps ROHSTexas InstrumentsPrecision Op AmpsSRD-12VDC-SL-C
插件,19.2x15.6mm100mΩ 10ms 10ms 12V 15A 250V@AC 360mW 400Ω 5 Non-Polarized - Single Coil One set changeover: 1C (SPDT - changeover) 插件,19.2x15.6mm Power Relays ROHS松乐Power RelaysB2B-XH-A
插件,P=2.5mm-25℃~+85℃ 1 1x2P 2 2.5mm 250V 2P 3A 5.75mm 7.4mm 7mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board ConnectorTL431ACLP
TO-92-30℃~+70℃ 100mA 1mA 2.495V~36V 2.495V~36V 22.9ppm/℃ Adjustable Parallel ±1% TO-92-3 Voltage Reference ROHSTexas InstrumentsVoltage ReferenceB4B-ZR
插件,P=1.5mmWire To Board ConnectorJST
README
README.mdfour-point-probe
Four point probe for semiconductor instrumentation system
Software: voltage simulation pipeline
This repo includes a modular Python simulation for voltage acquisition with filters, live plotting, and CSV logging. It is designed to be swapped later with ADS1256 serial input from Arduino.
Development
If you plan to change code, start with:
- CONTRIBUTING.md for the CI contract, local preflight, and PR checklist.
- software/scripts/README.md for
evaluate,integrate, and the compliance checker. - software/README.md for the software module overview and run examples.
CONTRIBUTING.mdalso explains how to write new tests undersoftware/tests/and run them from the repo root.
Setup
Install dependencies:
pip install matplotlibOptional (for future ADS1256 serial input):
pip install pyserialRun
From the repo root:
python -m software.mainExample with custom settings:
python -m software.main --sample-rate 100 --window-seconds 8 --noise 0.0005 --stepOffline data paths
There are two ways to work with recorded CSV data:
- Replay a CSV through the live runtime when you want the same pipeline as hardware, including the backbone, logger, and visualizer:
python -m software.main --source csv --csv-path software/output/testbench/stable20mA.csv --backbone baseline- Run offline evaluation when you want metrics and snapshot comparison without hardware commands or the live plot loop:
python -m software.scripts.evaluate --input software/output/testbench/stable20mA.csv --backbones baseline --out software/output/evaluate/baseline-stable20mAThe offline evaluator writes a metrics CSV with the decided snapshot fields, marks that chosen snapshot with a star in the plot, and keeps the result separate from the live runtime output.
The default snapshot recording gate is configured in software/config/config.py, including the minimum recording duration used before a backbone may decide on a VI snapshot.
Serial protocol and CLI
Hardware integration uses a small text protocol implemented by the Arduino firmware and
managed by software/command/serial_commander.py.
Framing markers (exact strings):
*STREAM_START— emitted by the Arduino to mark stream beginning*STREAM_STOP— emitted by the Arduino to mark stream termination
Control commands sent from host to Arduino (single ASCII characters):
R— reset deviceC— start streaming sampless— stop streamingiN— set current stage toN(e.g.i2)
The serial reader expects CSV-style measurement lines containing voltage,current_mA.
Common CLI execution examples:
- Replay testbench CSVs and write evaluation results: python -m software.scripts.evaluate --input software/output/testbench --out results/
Single backbone on single dataset (example):
python -m software.scripts.evaluate
--input software/output/testbench/stable20mA.csv
--backbones baseline
--out results/single_baseline_stable20mA
- Run main with hardware ADS1256 on COM5: python -m software.main --source serial --port COM5 --baud 115200 --backbone baseline
- Run headless evaluation from Python: python -c "from software.scripts.evaluate import main; main(['--input','software/output/testbench'])"
See software/config/config.py for all CLI defaults and flags (backbone selection, hysteresis thresholds, plot mode, etc.).
Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 6 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RS3, RS4, RS10, RS12, RS13, RS14 |
| 5 | OP07CP | OP07CP:DIP794W45P254L959H508Q8 | U3, U4, U5, U6, U7 |
| 4 | 1888687 | 1888687:PHOENIX_1888687 | J8, J9, J13, J14 |
| 4 | SRD-12VDC-SL-C | SRD-12VDC-SL-C:RELAY_SRD-12VDC-SL-C | K1, K2, K3, K4 |
| 3 | 15 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RS6, RS8, RS9 |
| 2 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RS2, RS7 |
| 2 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RS1, RS5 |
| 2 | 3S4AE_0912S1UP | 3S4AE_0912S1UP:CONV_3S4AE_0912S1UP | PS1, PS2 |
| 2 | 6130XX11821_61300311821 | 6130XX11821_61300311821:61300311821 | J1, J2 |
| 2 | B2B-XH-A | B2B-XH-A:JST_B2B-XH-A | J3, J4 |
| 2 | CON-SMA-EDGE-S | CON-SMA-EDGE-S:RFSOLUTIONS_CON-SMA-EDGE-S | J10, J11 |
| 2 | TL431ACLP | TL431ACLP:VREG_TL431ACLP | VR1, VR2 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RS11 |
| 1 | 1730188 | 1730188:PHOENIX_1730188 | J12 |
| 1 | 2.43k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RGain1 |
| 1 | 24 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RS15 |
| 1 | B4B-ZR | B4B-ZR:B4B-ZR | CON1 |
The 55 most common of 71 parts.
Similar boards
- 2 layers

- 2 layers46.7 × 37.7 mm

- 4 layers120 × 50 mm

- 4 layers

- 2 layers190 × 110 mm

- 4 layers103.5 × 118 mm

MEM RevA
liamobbrien1/gbr-marlbot
Open hardware, embedded software, and experimental infrastructure for the GBR MARLBOT multi-robot research platform.
84 parts - 2 layers92 × 72.2 mm

- 4 layers144.2 × 82.8 mm

SmartFuseBox
k3ldar/PowerControlHub
PowerControlHub is a flexible automation controller for 12V systems. It combines relay switching, sensor monitoring, and smart‑home connectivity (MQTT, Home Assistant, REST, BLE) into one device.
93 parts5GPL-3.0
Questions
How big is the InstrumentV3 PCB?
It measures 116.5 × 152.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the InstrumentV3 use?
71 parts, built around the OP07CP, SRD-12VDC-SL-C, B2B-XH-A and TL431ACLP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InstrumentV3 KiCad files?
From the orpheus016/four-point-probe repository on GitHub, at the commit this page was made from: the board is hardware/PCB/InstrumentV3/InstrumentV3.kicad_pcb and its schematic hardware/PCB/InstrumentV3/InstrumentV3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the InstrumentV3 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).