

Esp8266 temperature iot
This is the PCB portion of the temperature plotting iot project.
- Size
- 50 × 86.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 20
- Pads
- 105
- Tracks, vias
- 263, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Dec 2019
- Updated
- 8 Jan 2020
Overview
Esp8266 temperature iot is an open-source printed circuit board by optisimon, from the optisimon/esp8266_temperature_iot_PCB repository on GitHub. It is a 2-layer board of 50 × 86.5 mm with 28 parts on 20 nets, routed with 263 tracks and 7 vias.
It is built around the WEMOS D1 MINI, MCP3208-BI/P and PESD3V3L2BT. Its parts include 9 resistors, 8 capacitors, 4 diodes, 3 connectors and 2 ICs. It belongs with the home automation and IoT boards and the ESP8266 boards of this library.
Main components
3WEMOS D1 MINI
A mini wifi board with 4MB flash based on ESP-8266EX, hardware version 4.0.0.LolinUncategorisedMCP3208-BI/P
PDIP-16-40℃~+85℃ 0.5LSB 100kHz 12 1LSB 1MHz、2MHz 2.7V~5.5V 500nA 8 External External Multiplexers、Bipolar input Not supported SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)PESD3V3L2BT
SOT-23-65℃~+150℃ 101pF 15A@8/20us 2 26V 3.3V 350W 5.8V 90nA Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
README
README.mdesp8266_temperature_iot_PCB
This is the PCB portion of the temperature plotting iot project.
Project homepage: https://optisimon.com/esp8266/arduino/temperature/monitoring/2020/01/07/esp8266-temperature-plotting-iot/
Software portion: https://github.com/optisimon/esp8266_temperature_iot
Hardware portion: https://github.com/optisimon/esp8266_temperature_iot_PCB/
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6, C7 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5, R6, R7, R8, R9 |
| 4 | PESD3V3L2BT | Package_TO_SOT_SMD:SOT-23_Handsoldering | D1, D2, D3, D4 |
| 2 | Screw_Terminal_01x09 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_9-G-5,08_1x09_P5.08mm_Horizontal | J1, J2 |
| 1 | 1k | Resistor_SMD:R_1210_3225Metric_Pad1.42x2.65mm_HandSolder | R3 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8 |
| 1 | 270 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | MCP3208 | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | U2 |
| 1 | Polyfuse_Small | esp8266_temperature_iot:Fuse_Littlefuse-2016L | F2 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
Similar boards
- 6 layers55 × 95 mm

- 4 layers100 × 100 mm

ESP32-Eurorack Audio
ctag-fh-kiel/esp32-eurorack-audio
Open source eurorack audio module based on ESP32
173 parts71 - 2 layers150.5 × 127 mm

Eurorack engine
sinneb/esp32-hvcc
Heavy compiler (hvcc) sources running on ESP32-DevKitC powered eurorack module
81 parts29 - 2 layers100 × 100 mm

- 2 layers222.3 × 80 mm

Theremin lcd controls board
fpga-theremin/theremin
Open source digital FPGA based theremin project
88 parts11 - 4 layers100 × 100 mm

- 2 layers130 × 80 mm

Pico controller
cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source
125 parts8GPL-3.0 - 2 layers183 × 128.7 mm

Questions
How big is the Esp8266 temperature iot PCB?
It measures 50 × 86.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp8266 temperature iot use?
28 parts, built around the WEMOS D1 MINI, MCP3208-BI/P and PESD3V3L2BT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp8266 temperature iot KiCad files?
From the optisimon/esp8266_temperature_iot_PCB repository on GitHub, at the commit this page was made from: the board is esp8266_temperature_iot/esp8266_temperature_iot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp8266 temperature iot design in my own project?
Its repository states no licence, so its author keeps all rights: ask optisimon before reusing the design.