2 layers164 × 100 mm
2 layers
Display
OpenRemise/DisplayDiplay for Open Reminse Housing & Display
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 55
- Pads
- 66
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Dec 2025
- Updated
- 28 Mar 2026
Overview
Display is an open-source printed circuit board by OpenRemise, from the OpenRemise/Display repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 3 parts on 55 nets.
It is built around the ATMEGA328P-AU and AMS1117CD-3.3. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AMS1117CD-3.3
TO-252-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdHousing and Display for Open remise
Housing will be the basic for the Display Dimensions. The Gcode for the Housing and the Display Cover must generated local according to the used 3d Printer
Display Software runnig on Arduino added including Small OLED Display
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | AMS1117CD-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U3 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | EA_DOGM128X-6 | Display:EA_DOGM128-6 | U2 |
Questions
What parts does the Display use?
3 parts, built around the ATMEGA328P-AU and AMS1117CD-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Display KiCad files?
From the OpenRemise/Display repository on GitHub, at the commit this page was made from: the board is 02_Display_HW/03_HW/Display/Display.kicad_pcb and its schematic 02_Display_HW/03_HW/Display/Display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Display design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers112 × 78.5 mm
- 4 layers79.8 × 51.8 mm
- 4 layers70 × 60 mm
CAN Logger V2.0
deep-th/CAN_Logger
This is a compact and reliable CAN logger board built for automotive and industrial applications. It features the ESP32-S3 microcontroller and MCP25625 CAN controller with integrated transceiver, supporting two…
138 parts3 - 2 layers64.5 × 49.8 mm
Tlapixki HelloWorld
Hugondon/Proyecto-Trayectorias
Códigos utilizados para el proyecto de ingeniería
33 parts3 - 2 layers55.5 × 64.9 mm
Devboard
carlassaraf/tp_analyzer
RP2350A based firmware for a three-phase analyzer instrument running FreeRTOS and LVGL UI
22 parts1 - 2 layers30.2 × 34 mm
ESP32Mini1-DevBoard
Casual-Coder-dev/ESP32-Mini-1-N8-Devboard-
This project contains the pcb of an ESP32 Mini 1 N8 Development board that is suitable for your needs.
16 parts1MIT - 2 layers39.8 × 20.6 mm
