
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

Hardware is based off an open source project called Speeduino by Josh Stewart.
Max9926-VR is an open-source printed circuit board by OpenLogicEFI, from the OpenLogicEFI/Hardware repository on GitHub. It is a 2-layer board of 21.7 × 22.1 mm with 16 parts on 15 nets, routed with 74 tracks and 35 vias.
It is built around the MAX9926UAEE+. Its parts include 8 resistors, 5 capacitors, 1 IC and 1 connector.
Formerly: DetonationEMS
OpenLogicEFI ECU's are based off an open source project called Speeduino by Josh Stewart. Currently all released boards use official Speeduino firmware. In TunerStudio set to "Board Layout" to "Speeduino 0.4"
All designs are released under the TAPR Open Hardware License v1.0
The Official Speeduino Manual, documents and discord are the best places to start.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R6 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 1nF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | NP | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10nf | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | Logo_Open_Hardware_Large | Detonation-Logos:SpeeduinoCompatible-17mm | G1 |
| 1 | MAX9926UAEE+ | Detonation:MAX9926-HandSoldering | IC1 |
| 1 | VR_Header | Detonation:Socket_VRConditioner | J1 |

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

Tjeerdie/SPECTRE
Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.

Churrosoft/uEFI-v6.x
Speeduino compatible board, x4 ignition channels, x4 injection channels, 2&4 wire IAC



Churrosoft/kibot_test
export KICAD63DMODELDIR="/usr/share/kicad/3dmodels/" export KICAD6FOOTPRINTDIR="/usr/share/kicad/footprints/" export KICAD6SYMBOLDIR="/usr/share/kicad/symbols/" export KICAD6TEMPLATEDIR="/usr/share/kicad/template/"



Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
It measures 21.7 × 22.1 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the MAX9926UAEE+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OpenLogicEFI/Hardware repository on GitHub, at the commit this page was made from: the board is Modules/VR Conditioner MAX9926/RevB/Max9926-VR.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OpenLogicEFI before reusing the design.