
Bms c1
OpenConverters/Faraday
The living record of ABT #422 (closed 2026-08-01; this file is its successor — update it as boards land). The program: grow the open-source converter corpus, track (a) the derive success rate of the critical-mesh…

The living record of ABT #422 (closed 2026-08-01; this file is its successor — update it as boards land). The program: grow the open-source converter corpus, track (a) the derive success rate of the critical-mesh…
Orangecrab is an open-source printed circuit board by OpenConverters, from the OpenConverters/Faraday repository on GitHub, published under the MIT licence. It is a 6-layer board of 50.8 × 22.9 mm with 166 parts on 176 nets, routed with 6,919 tracks and 449 vias.
It is built around the ATSAMD11D14A-MU, FAN53541UCX and BQ24232RGT, with the TPS51206DSQ and TYETBCSANF-32.000000 among its other parts. Its parts include 77 capacitors, 29 resistors, 10 ICs, 7 connectors and 3 inductors. It belongs with the SAM D and SAM and FPGA and CPLD boards of this library.
The living record of ABT #422 (closed 2026-08-01; this file is its successor —
update it as boards land). The program: grow the open-source converter corpus,
track (a) the derive success rate of the critical-mesh analysis, (b)
human-reviewed member-set agreement, (c) fallback correctness — and pin every
reviewed board as a Catch2 regression (test_real_boards.cpp,
[corpus-pin], SKIP when the corpus is not fetched). Characterization-test
discipline throughout: pins are verified against physical sense and never
silently re-pinned.
Every converter board in the program derives. 14 derived meshes across 8 physical boards, zero known wrong-member cases:
| Board | Node(s) | Derived mesh | Notes |
|---|---|---|---|
| PoE flyback (Altium ODB++) | NetD17_3 | T7 + D22 + R29 | RCD clamp — includes the D22 a hand-run prototype missed |
| NetC52_2 | T4 + D21 + R16 | ||
| LM5143-Q1EVM (TI gerbers) | ×2 | exact per SNVA-documented hot loops | two-phase buck |
| LM5177EVM (via KiCad 9) | buck + boost | both match SLVAFJ3 | |
| LM5123EVM (via KiCad 9) | boost | closes through the OUTPUT cap | Franz's own example of what pattern-matching gets wrong |
| mppt-2420-lc | SW_NODE | Q1 + Q4 + C4 (71 mm², 25 nH) | pinned |
| mppt-1210-hus | SW_NODE | Q1 + Q4 + C4 (64 mm², 26 nH) | pinned; LOAD_S pinned to keep REFUSING a divider-as-clamp |
| mppt-2420-hc | SW_NODE | Q1 + Q2 + C3 (buck) | TO-220 equal pads → conduction case d (pin 1 = JEDEC control terminal, 2 mm² pad floor) |
| VESC (KiCad + ODB++) | H1/H2/H3 | Q1+Q2+R53+C40 · Q3+Q4+C8 · Q5+Q6+R54+C37 | Kelvin shunts NAMED as mesh members; both formats agree byte-for-byte |
Plus 4 synthetic topology pins in Catch2: buck, boost-with-decoy, flyback-RCD, Kelvin-shunt bridge — and the determinism pin (pad order + exporter rounding invariance).
Correct negatives: pwm-2420-lus (PWM controller, SOLAR- only), moteus / FPGA / interface boards, hackrf (pinned: 0 switch nodes, exactly 2 candidates — its dual-LDO + ferrite harness is externally isomorphic to a fixed buck; see the main README).
Wrong-member cases found and fixed during the program (each caught by the regression pins this ledger mandated — which is the whole argument for them):
scripts/fetch_corpus.py).Altium native .PcbDoc stays refused by design (binary OLE). Altium boards
are covered by three validated routes: ODB++ export, Gerber_NCdrills_IPC
fab output, and the .PcbDoc → KiCad 9 importer.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 100nF | Capacitor_SMD:C_0201_0603Metric | C4, C20, C26, C28, C30, C31, C32, C33, C39, C41, C43, C50, C51, C54, C55, C57 +12 |
| 24 | 10nF | Capacitor_SMD:C_0201_0603Metric | C1, C2, C5, C14, C19, C25, C27, C38, C40, C42, C44, C45, C48, C49, C52, C53 +8 |
| 13 | SMD_TP | gkl_misc:TestPoint_Pad_D0.5mm | TP1, TP2, TP3, TP19, TP20, TP26, TP27, TP28, TP29, TP30, TP31, TP32, TP33 |
| 8 | 10uF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8, C11, C15, C16, C17, C18 |
| 7 | 100k | Resistor_SMD:R_0201_0603Metric | R1, R5, R13, R14, R17, R18, R25 |
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric | C21, C22, C34, C35, C36, C37 |
| 6 | 4.7K | Resistor_SMD:R_0201_0603Metric | R4, R21, R22, R23, R24, R27 |
| 6 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C12, C13, C29, C46, C47, C77 |
| 6 | 50R | Resistor_SMD:R_Array_Convex_4x0402 | RN1, RN2, RN3, RN4, RN5, RN6 |
| 4 | 600R | Inductor_SMD:L_0402_1005Metric | FB1, FB2, FB3, FB4 |
| 3 | 0.47uH | Inductor_SMD:L_0805_2012Metric | L1, L2, L3 |
| 3 | 1.5K | Resistor_SMD:R_0201_0603Metric | R7, R8, R20 |
| 3 | FAN53541 | Package_CSP:WLCSP-20_1.934x2.434mm_Layout4x5_P0.4mm | U1, U2, U7 |
| 2 | 10K | Resistor_SMD:R_0201_0603Metric | R26, R28 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C23, C24 |
| 2 | LED_ARGB | gkl_led:0404LED_RGB | D1, D2 |
| 2 | MountingHole | MountingHole:MountingHole_2.1mm | H3, H4 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2 |
| 1 | 0.22uF | Capacitor_SMD:C_0201_0603Metric | C10 |
| 1 | 0R | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 10K | Resistor_SMD:R_Array_Convex_4x0402 | RN7 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 147k | Resistor_SMD:R_0201_0603Metric | R16 |
| 1 | 1K | Resistor_SMD:R_0201_0603Metric | R29 |
| 1 | 240R | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 267k | Resistor_SMD:R_0201_0603Metric | R15 |
| 1 | 3.06k | Resistor_SMD:R_0201_0603Metric | R11 |
| 1 | 3.57k | Resistor_SMD:R_0201_0603Metric | R9 |
| 1 | 31.6k | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | 4.32k | Resistor_SMD:R_0201_0603Metric | R12 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C71 |
| 1 | 56.2k | Resistor_SMD:R_0201_0603Metric | R10 |
| 1 | AT25SF081 | gkl_housings_dfn:DFN-8-1EP_3x2mm_Pitch0.5mm | U6 |
| 1 | ATSAMD11D14A | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U9 |
| 1 | BQ24232 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm | U5 |
| 1 | Conn_01x12_Male | gkl_conn:Feather_PinHeader_1x12 | J1 |
| 1 | Conn_01x16_Male | gkl_conn:Feather_PinHeader_1x16 | J2 |
| 1 | Conn_02x15_Odd_Even | gkl_conn:DF12(3.0)-30DP-0.5V(86) | J7 |
| 1 | ECP5U25 | bosonFrameGrabber:csBGA_132 | U3 |
| 1 | JST | gkl_conn:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J5 |
| 1 | JTAG | gkl_conn:FTSH-105-XX-X-DV | J6 |
| 1 | LOGO | gkl_logos:oshw_small | G*** |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | logo | G*** |
| 1 | MT41K64M16TW-107_J-TR | Package_BGA:BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm | U4 |
| 1 | MicroSd | gkl_conn:micro_sd_1051620001 | J4 |
| 1 | NCP115-2.5 | gkl_housings_son:X2SON_4_1.0x1.0mm | U10 |
| 1 | SW_Push | gkl_misc:PTS_810_SMT_Switch | SW1 |
| 1 | TPS51206 | gkl_housings_dfn:WSON-10-1EP_2x2mm_P0.4mm | U8 |
| 1 | TYETBCSANF-32.000000 | gkl_time:Oscilator_2.5x2.0 | OSC1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J3 |
The 161 most common of 166 parts.

OpenConverters/Faraday
The living record of ABT #422 (closed 2026-08-01; this file is its successor — update it as boards land). The program: grow the open-source converter corpus, track (a) the derive success rate of the critical-mesh…

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

azerimaker/Penguino-SAMR34
This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.

shBLOCK/TileGlobeMC
Project Structure ----- - tileglobe: game logic - datagen/mod: a fabric modding environment for extracting/generating data from vanilla (e.g.

Xasin/TapBadgeV2
The second, far more ambitious version of the TapBadge wearable




It measures 50.8 × 22.9 mm and has 6 copper layers, 1.6 mm thick.
166 parts, built around the ATSAMD11D14A-MU, FAN53541UCX, BQ24232RGT and TPS51206DSQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OpenConverters/Faraday repository on GitHub, at the commit this page was made from: the board is corpus/orangecrab.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).