4 layers40 × 40 mm
4 layers40 × 40 mm
SnapNodes RP2 Core
shBLOCK/SnapNodes-RP2- Size
- 40 × 40 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 136
- Nets
- 111
- Pads
- 470
- Tracks, vias
- 1,382, 265
- Pours
- 508
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 3 Jan 2026
- Updated
- 3 Sep 2026
Overview
SnapNodes RP2 Core is an open-source printed circuit board by shBLOCK, from the shBLOCK/SnapNodes-RP2 repository on GitHub. It is a 4-layer board of 40 × 40 mm with 136 parts on 111 nets, routed with 1,382 tracks and 265 vias.
It is built around the W25Q128JVSIQ, 74AHC1G04SE and BQ24232RGT, with the TPS62A01PDDC, PESD3V3S1BA and PESD5V0S1BA among its other parts. Its parts include 43 resistors, 34 diodes, 28 capacitors, 10 connectors and 6 ICs. It belongs with the RP2350 boards of this library.
Main components
8
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
74AHC1G04SE
SOT-353-40℃~+125℃ 1 1 1.5V~3.85V 1.9V、2.9V、4.4V 1uA 2V~5.5V 500mV~1.65V 7.5ns@5V,50pF 74AHC 8mA 8mA Noise suppression function Schmitt trigger SOT-353 Inverters ROHSDiodes IncorporatedInverters
BQ24232RGT
VQFN-16-EP(3x3)-40℃~+125℃ 1 1.5mA 4.2V 4.35V~10.2V 500mA Charging IC Lithium Battery Support VQFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery Management
TPS62A01PDDC
TSOT-23-6UncategorisedTexas Instruments
PESD3V3S1BA
SOT-523ESD And Surge Protection (TVS/ESD)TDSEMIC
PESD5V0S1BA
SOD-323-55℃~+150℃ 1 12A@8/20us 130W@8/20us 14V 35pF 5V 5nA 9.5V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOD-323 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching Diodes
2N7002W
SOT-323-55℃~+150℃ 1 N-channel 1.6V 115mA 200mW 25pF 50pF 5pF 60V 900mΩ@10V N-Channel SOT-323 MOSFETs ROHShongjiachengMOSFETs
Parts
136| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | PESD3V3S1BA | Diode_SMD:D_SOD-523 | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +10 |
| 16 | 120 | Resistor_SMD:R_0402_1005Metric | R2, R3, R5, R6, R8, R9, R11, R12, R31, R32, R35, R36, R38, R39, R41, R42 |
| 15 | 100n | Capacitor_SMD:C_0402_1005Metric | C10, C11, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C25, C26, C37 |
| 8 | 150 | Resistor_SMD:R_0402_1005Metric | R1, R4, R7, R10, R33, R37, R40, R43 |
| 7 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C2, C4, C5, C6, C7, C9, C12 |
| 6 | 100k | Resistor_SMD:R_0402_1005Metric | R19, R22, R23, R28, R29, R34 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R14, R15, R17, R18 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 4 | PESD5V0S1BA | Diode_SMD:D_SOD-523 | D29, D30, D31, D32 |
| 4 | P_Female | Project:BC-20-5PD160 | J1, J3, J5, J7 |
| 4 | P_Male | Project:BC-15-5P380 | J2, J4, J6, J8 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP3, TP4, TP5 |
| 3 | 1N4148WT | Diode_SMD:D_SOD-523 | D1, D2, D4 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C23, C24 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R25, R30 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R26, R27 |
| 2 | 33 | Resistor_SMD:R_0402_1005Metric | R13, R24 |
| 2 | 4.7u | RP2350:C_0402_1005Metric_small_pads | C1, C3 |
| 1 | 1.8k | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 120p | Capacitor_SMD:C_0402_1005Metric | C36 |
| 1 | 12M | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1u | Inductor_SMD:L_Wuerth_MAPI-2010 | L2 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 2N7002W | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | 3.3u | RP2350:L_pol_2016 | L1 |
| 1 | 390k | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 3V | Diode_SMD:D_SOD-523 | D5 |
| 1 | 702 | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | BT1 |
| 1 | 74AHC1G04 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U7 |
| 1 | 86.6k | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | BQ24232RGT | Project:VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias | U3 |
| 1 | Conn_01x24_MountingPin | Project:FPC_Verticle_24pin_0.5mm | J20 |
| 1 | ESP-PSRAM64H | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | RP2350_80QFN | Project:RP2350-QFN-80-1EP_10x10_P0.4mm_EP3.4x3.4mm_ThermalVias | U1 |
| 1 | RP_RUN | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 1 | SWD | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J9 |
| 1 | TPS62A01PDDC | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_BOOT | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | JP2 |
| 1 | W25Q128JVSIQ | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U6 |
More from shBLOCK/SnapNodes-RP2
2- 4 layers40 × 20 mm
Similar boards
- 2 layers85 × 40 mm
SnapNodes RP2
shBLOCK/TileGlobeMC
Project Structure ----- - tileglobe: game logic - datagen/mod: a fabric modding environment for extracting/generating data from vanilla (e.g.
168 parts21 - 2 layers50 × 45.3 mm
Tempic HW
jernej13/Tempic
Small solarpowered ESP32 based indoor/outdoor wifi weather station.
61 parts2MIT - 2 layers25.4 × 30.5 mm
- 4 layers135.8 × 149.3 mm
TapBadgeV2
Xasin/TapBadgeV2
The second, far more ambitious version of the TapBadge wearable
110 parts6GPL-3.0 - 6 layers50.8 × 22.9 mm
Orangecrab ext pll
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
167 parts744MIT - 6 layers50.8 × 22.9 mm
Orangecrab
OpenConverters/Faraday
The living record of ABT #422 (closed 2026-08-01; this file is its successor — update it as boards land). The program: grow the open-source converter corpus, track (a) the derive success rate of the critical-mesh…
166 partsMIT - 2 layers145 × 65 mm
- 4 layers76 × 50 mm
Wigglecam
jadenrhee/wigglecam-controller
RP2040 co-processor board for a 4-lens wigglegram camera: constant-current flash, controls, battery telemetry, Pi 5 I2C interface. 4-layer, DRC-clean, fab-ready.
105 parts
Questions
How big is the SnapNodes RP2 Core PCB?
It measures 40 × 40 mm and has 4 copper layers, 0.8 mm thick.
What parts does the SnapNodes RP2 Core use?
136 parts, built around the W25Q128JVSIQ, 74AHC1G04SE, BQ24232RGT and TPS62A01PDDC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SnapNodes RP2 Core KiCad files?
From the shBLOCK/SnapNodes-RP2 repository on GitHub, at the commit this page was made from: the board is hardware/PCB/SnapNodes-RP2_Core.kicad_pcb and its schematic hardware/PCB/SnapNodes-RP2_Core.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SnapNodes RP2 Core design in my own project?
Its repository states no licence, so its author keeps all rights: ask shBLOCK before reusing the design.