

Robocon main
- Size
- 90 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 56
- Pads
- 188
- Tracks, vias
- 406, 251
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Apr 2026
- Updated
- 16 Jul 2026
Overview
Robocon main is an open-source printed circuit board by open-rdc, from the open-rdc/IntelligentRobotContest_2026_team1 repository on GitHub. It is a 2-layer board of 90 × 60 mm with 49 parts on 56 nets, routed with 406 tracks and 251 vias.
It is built around the RP2040, TB67H450FNG and BNO055. Its parts include 13 connectors, 9 resistors, 7 ICs, 3 capacitors and 2 diodes. It belongs with the RP2040 boards of this library.
Main components
3RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)TB67H450FNG
SOP-8_EP_150milSOP-8-EP New Arrivals ROHSToshibaUncategorisedBNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometers
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 7 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | 3V3, 5V, 12V, D4, D5, D6, D7 |
| 4 | TB67H450 | my_footprints_library:AE-TB67H450 | U3, U5, U6, U7 |
| 2 | D | my_footprints_library:MA10EB045 | D8, D9 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H7.3mm | TACT1, TACT2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2 |
| 1 | 0.33μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10μF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 2.2μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 3-Terminal Regulator | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U4 |
| 1 | 3557-15 | my_footprints_library:3557-15_KEY | F1 |
| 1 | BNO055 | my_footprints_library:BNO055 | U8 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J15 |
| 1 | DC1_OUT | Connector_JST:JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical | J3 |
| 1 | DC2_OUT | Connector_JST:JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical | J1 |
| 1 | DC3_OUT | Connector_JST:JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical | J5 |
| 1 | DC4_OUT | Connector_JST:JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical | J7 |
| 1 | POW | my_footprints_library:1P2T_toggle | POW |
| 1 | POWER | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J2 |
| 1 | RP2040 | RP2040:RP2040 | U2 |
| 1 | from_OKL-T/6-W12N-C | Connector_Wire:SolderWirePad_1x01_SMD_3x6mm | J14 |
| 1 | to_CAM | Connector:NS-Tech_Grove_1x04_P2mm_Vertical | J9 |
| 1 | to_COLOR | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J4 |
| 1 | to_MUX | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J12 |
| 1 | to_OKL-T/6-W12N-C | Connector_Wire:SolderWirePad_1x01_SMD_3x6mm | J13 |
| 1 | to_SERVO1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | to_SERVO2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
The 47 most common of 49 parts.
More from open-rdc/IntelligentRobotContest_2026_team1
4- 2 layers90 × 50 mm

- 2 layers60 × 15 mm

- 2 layers24 × 13 mm

- 2 layers24 × 13 mm

Similar boards
- 2 layers47 × 38.7 mm

- 2 layers

- 2 layers45 × 42 mm

- 2 layers32 × 36 mm

- 4 layers184.3 × 131 mm

- 2 layers138.8 × 96.4 mm

- 4 layers

- 4 layers149.6 × 98 mm

Questions
How big is the Robocon main PCB?
It measures 90 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Robocon main use?
49 parts, built around the RP2040, TB67H450FNG and BNO055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Robocon main KiCad files?
From the open-rdc/IntelligentRobotContest_2026_team1 repository on GitHub, at the commit this page was made from: the board is PCB/MainBoard/robocon_main.kicad_pcb and its schematic PCB/BallBoard/BallBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Robocon main design in my own project?
Its repository states no licence, so its author keeps all rights: ask open-rdc before reusing the design.