

Airguard v1
Do-it-yourself electronics kit for building an air quality monitor for your school, work and home.
- Size
- 169.1 × 252.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 53
- Pads
- 117
- Tracks, vias
- 17,842, 42
- Pours
- 193
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Sep 2021
- Updated
- 29 Apr 2022
Overview
Airguard v1 is an open-source printed circuit board by open-lv, from the open-lv/air-guard repository on GitHub, published under the MIT licence. It is a 2-layer board of 169.1 × 252.5 mm with 38 parts on 53 nets, routed with 17,842 tracks and 42 vias.
It is built around the ESP32-DEVKITC-VE, MH-Z19B and PN2222A. Its parts include 15 resistors, 6 connectors, 4 transistors, 3 ICs and 2 diodes. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
Main components
3README
hardware/rear-pcb/readme.mdGAISA SARGS R03 REAR PCB
This pcb acts as a cover for the NDIR CO2 sensor, which may be sensitive to direct sunlight
Version 3 hardware, designed in Kicad 5 by SKRUBIS & ZAHARS ZE
KNOWN BUGS: JLCPCB gerber viewer doesn't show or detect the outline, use stackup.txt (found in gerber archive) to specify those
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 4700Ω | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R6, R7, R8, R9, R10 |
| 4 | PN2222A | TO_SOT_Packages_THT:TO-92_Molded_Wide | Q1, Q2, Q3, Q4 |
| 3 | 68Ω | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R12, R13 |
| 3 | Conn_01x04_Female | Oddities:Dummy_Empty | J1, J3, J6 |
| 2 | 33Ω | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14, R15 |
| 2 | Conn_01x19_Female | Oddities:Dummy_Empty | J4, J5 |
| 2 | LED | footprints:LED_D3.0mm | D1, D2 |
| 1 | BALSS | footprints:buzzer-C360606 | BZ1 |
| 1 | Badgelife_sao_connector_v169bis | badgelife_sao_v169bis:Badgelife-SAOv169-SAO-2x3 | X1 |
| 1 | CP | footprints:can-cap11x6.3 | C1 |
| 1 | Conn_01x05_Female | Oddities:Dummy_Empty | J2 |
| 1 | ESP32_DEVKIT_C | footprints:ESP32_DEVKIT_C | U2 |
| 1 | LED_GREEN | LEDs:LED_D10.0mm | ZAĻŠ |
| 1 | LED_RED | LEDs:LED_D10.0mm | SARKANS |
| 1 | LED_YELLOW | LEDs:LED_D10.0mm | DZELTENS |
| 1 | MH-Z19B | footprints:Winsen_MH-Z19B | U1 |
| 1 | R_PHOTO 8-20kR | Opto-Devices:Resistor_LDR_5.1x4.3_RM3.4 | R5 |
| 1 | SSD1306 | footprints:SSD1306 | U3 |
| 1 | SW_Push | Buttons_Switches_ThroughHole:SW_PUSH_6mm_h5mm | SW1 |
| 1 | Val** | zahars-art:03 | Ref** |
Similar boards
- 2 layers43 × 63 mm

- 2 layers118 × 70 mm

ESP32SmartBoard PCB
ronaldsieber/ESP32SmartBoard_PCB
KiCad project of a Printed Cuircit Board (PCB) for ESP32 with Temperature/Humidity/CO2 Sensors, User LEDs and Buttons
36 parts4MIT - 2 layers110.1 × 38.6 mm

EnvironmentalSensors
strayer/EnvironmentalSensor
A WiFi environmental sensor based on Tasmota that reports temperature, air pressure, air quality, humidity and CO2 (ppm).
8 parts4MIT - 2 layers79 × 79 mm

Hm env sensor
HiMinds/himinds-boosting-innovation-embedded-env-sensor-hw
HiMinds Open Source Wireless Environmental Sensor HW
94 parts1Apache-2.0 - 2 layers94 × 68.6 mm

CO2Sensor
JensFZ/CO2Sensor_PCB
Added external power suply, leds and a buzzer (all of them are optional)
18 parts1 - 2 layers65 × 40 mm

Indoor sensor
Djuke-DIYAudio/indoor-sensor
Affordable indoor sensor for measuring CO2, temperature, humidity and pressure
19 parts - 2 layers51.6 × 78 mm

MHZ19B wemos BM280 pistes 1mm buzz
Gonellarro/Sensor-de-CO2
Building a C02 and wheather station with Wemos D1 mini micro controller, MH Z19B and BM280 sensors
10 parts - 2 layers72 × 47 mm

Questions
How big is the Airguard v1 PCB?
It measures 169.1 × 252.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Airguard v1 use?
38 parts, built around the ESP32-DEVKITC-VE, MH-Z19B and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Airguard v1 KiCad files?
From the open-lv/air-guard repository on GitHub, at the commit this page was made from: the board is hardware/main-pcb/airguard_v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Airguard v1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).