

TractorKit Navis Board
GPS add-on board
- Size
- 76.8 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 40
- Pads
- 104
- Tracks, vias
- 160, 47
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Jul 2020
- Updated
- 4 Aug 2020
Overview
TractorKit Navis Board is an open-source printed circuit board by open-agri, from the open-agri/TractorKit-Navis-Board repository on GitHub. It is a 2-layer board of 76.8 × 38.1 mm with 30 parts on 40 nets, routed with 160 tracks and 47 vias.
It is built around the ESP32-WROOM-32 and AMS1117-3.3. Its parts include 7 capacitors, 5 connectors, 4 resistors, 3 ICs and 1 diode. It belongs with the ESP32 boards of this library.
Main components
2ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole_3.2mm_M3_DIN965_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | , , |
| 2 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C3, C7 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R3 |
| 1 | open-agri.github.io/TKN1 | ||
| 1 | 100u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 1u | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 1 | 2.2u | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 220u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C5 |
| 1 | ACS711xLCTR-12AB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BYPASS | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | C | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C6 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U3 |
| 1 | GPS_A | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | GPS_B | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | GPS_I2C | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J2 |
| 1 | GPS_UART | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | POWER | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J1 |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | SERVICE_3V3 | TestPoint:TestPoint_Pad_D1.0mm | + |
| 1 | SERVICE_BOOT | TestPoint:TestPoint_Pad_D1.0mm | B |
| 1 | SERVICE_GND | TestPoint:TestPoint_Pad_D1.0mm | - |
| 1 | SERVICE_RX | TestPoint:TestPoint_Pad_D1.0mm | RX |
| 1 | SERVICE_TX | TestPoint:TestPoint_Pad_D1.0mm | TX |
Similar boards
- 2 layers90 × 76.5 mm

- 2 layers85 × 56 mm

- 2 layers62.2 × 30.5 mm

WLED ESP32 Controller
Hasenpups/WLED_ESP32_Controller
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
24 parts44 - 2 layers150 × 50 mm

- 2 layers40 × 68 mm

MULTIGW
nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible
32 parts30LGPL-2.1 - 2 layers259.5 × 60.7 mm

1512hh control
larryqiann/AP1512HH-ESP32
Coway AP1512HH Main Board replacement with ESP32
71 parts29CERN-OHL-P-2.0 - 2 layers64.6 × 87.1 mm

- 2 layers139.7 × 88.9 mm

Questions
How big is the TractorKit Navis Board PCB?
It measures 76.8 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TractorKit Navis Board use?
30 parts, built around the ESP32-WROOM-32 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TractorKit Navis Board KiCad files?
From the open-agri/TractorKit-Navis-Board repository on GitHub, at the commit this page was made from: the board is TractorKit-Navis-Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TractorKit Navis Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask open-agri before reusing the design.