4 layers22.9 × 50.8 mm
Penguino Feather-4260-v1
azerimaker/Penguino-RAK4260
This repo contains all the necessary design and fabrication files for the RAK4260 based Penguino SAMR34 Feather breakout board.
60 parts8
2 layers55.9 × 58.2 mm
Gyroscope v03
op1407/gyroscopeSome symbols and footprints are also missing
- Size
- 55.9 × 58.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 67
- Pads
- 225
- Tracks, vias
- 487, 62
- Pours
- 37
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Mar 2022
- Updated
- 4 Nov 2024
Overview
Gyroscope v03 is an open-source printed circuit board by op1407, from the op1407/gyroscope repository on GitHub. It is a 2-layer board of 55.9 × 58.2 mm with 58 parts on 67 nets, routed with 487 tracks and 62 vias.
It is built around the RP2040, W25Q128JVSIQ and ME6215C33M5G, with the MPU-6050 and DMG1012T among its other parts. Its parts include 19 resistors, 17 capacitors, 7 ICs, 3 diodes and 2 connectors. It belongs with the RP2040 boards of this library.
Main components
5
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
ME6215C33M5G
SOT-23-5-40℃~+125℃ 1 160mV@(100mA)、320mV@(200mA) 18V 3.3V 300mA 6uA Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
DMG1012T
SOT-523-55℃~+150℃ 1 N-channel 1V 20V 280mW 300mΩ@4.5V、400mΩ@2.5V、500mΩ@1.8V 5.37pF 60.67pF 630mA 736.6pC@4.5V 9.68pF SOT-523 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
pcb/README.mdKiCad files
PCB design files
Some symbols and footprints are also missing
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C6, C8, C9, C10, C11, C12, C13, C14 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R8, R11, R12, R14, R20 |
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H6 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C7 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R7, R13, R16 |
| 3 | 220 | Resistor_SMD:R_0402_1005Metric | R4, R5, R6 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 27pF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 1 | 1 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 200 | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 5.6k | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | B5819W SL | Diode_SMD:D_SOD-123 | D1 |
| 1 | BOOTSEL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | CHARGE_IND | gyroscope:CHR_LED | D3 |
| 1 | DMG1012T | Package_TO_SOT_SMD:SOT-523 | Q1 |
| 1 | ECS-120-18-4VX | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | LED_AGRB | gyroscope:RGB_LED | D2 |
| 1 | LOGO | gyroscope:logo_mirrored | U7 |
| 1 | ME6215C33M5G | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | MPU-6050 | gyroscope:MPU-6050_pcb | U6 |
| 1 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H5 |
| 1 | PIM557 | gyroscope:PIM557 | U4 |
| 1 | POWER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | SW2 |
| 1 | RE_CAL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | SW3 |
| 1 | RP2040 | gyroscope:RP2040-QFN-56 | U1 |
| 1 | TFT_1.8in | gyroscope:TFT_1.8in | U5 |
| 1 | USB_B_Micro | gyroscope:USB 2.0 Micro B | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
Questions
How big is the Gyroscope v03 PCB?
It measures 55.9 × 58.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gyroscope v03 use?
58 parts, built around the RP2040, W25Q128JVSIQ, ME6215C33M5G and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gyroscope v03 KiCad files?
From the op1407/gyroscope repository on GitHub, at the commit this page was made from: the board is pcb/gyroscope_v03.kicad_pcb and its schematic pcb/gyroscope_v03.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gyroscope v03 design in my own project?
Its repository states no licence, so its author keeps all rights: ask op1407 before reusing the design.
Similar boards
- 4 layers17.8 × 33 mm
Nrf54l smol
picafe/nrf54l_smol
Ebyte E73-2G4M08S1F nRF54L15-based dev board with similar form factor to Pro Micro/Supermini
29 parts - 2 layers22.9 × 50.8 mm
TLM breakout v1 2
azerimaker/Penguino-SAMR34
This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.
42 parts61 - 2 layers42.1 × 37.3 mm
CAN BUS NODE
laforestlabs/KiCraft
KiCad PCB automation toolkit — placement, routing, scoring, and experiment management
20 parts - 2 layers31.3 × 17.5 mm
- 2 layers36 × 43 mm
Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying
119 parts52GPL-3.0 - 2 layers36.5 × 51 mm
- 2 layers21 × 51 mm
