2 layers78 × 78 mm
4 layers71.8 × 89.1 mm
Raspberry pi pico
Ons-Nouri/raspberry_Pi_Pico_PrototypeCustom Raspberry Pi Pico-style development board designed in KiCad, featuring the RP2040/RP2350 microcontroller, USB connectivity, power management, GPIO headers, and custom PCB layout. The project covers schematic design, component selection, PCB layout, routing, and hardware validation.
- Size
- 71.8 × 89.1 mm
- Copper layers
- 4
- Thickness
- 1.4 mm
- Parts
- 83
- Nets
- 64
- Pads
- 239
- Tracks, vias
- 374, 47
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Sep 2026
- Updated
- 4 Oct 2026
Overview
Raspberry pi pico is an open-source printed circuit board by Ons-Nouri, from the Ons-Nouri/raspberry_Pi_Pico_Prototype repository on GitHub. It is a 4-layer board of 71.8 × 89.1 mm with 83 parts on 64 nets, routed with 374 tracks and 47 vias.
It is built around the RP2350A, RT6150B-33GQW and W25Q32JVSSIQ, with the DMG1012T and PMEG6010ELRX among its other parts. Its parts include 35 connectors, 18 resistors, 15 capacitors, 3 ICs and 2 diodes. It belongs with the RP2040 and RP2350 boards of this library.
Main components
5
RP2350A
QFN-60-EP(7x7)Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Integrated LDO、True random number generator (TRNG)、Hardware ECC check QFN-60-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
RT6150B-33GQW
WDFN-10(2.5x2.5)-40℃~+125℃@(TJ) 1 1.8V~5.5V 3.3V 60uA 800kHz~1.2MHz 800mA Buck-Boost Buck-Boost Built-in Fixed Yes WDFN-10(2.5x2.5) DC-DC Converters ROHSRichtek TechDC-DC Converters
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
DMG1012T
SOT-523-55℃~+150℃ 1 N-channel 1V 20V 280mW 300mΩ@4.5V、400mΩ@2.5V、500mΩ@1.8V 5.37pF 60.67pF 630mA 736.6pC@4.5V 9.68pF SOT-523 MOSFETs ROHSDiodes IncorporatedMOSFETs
PMEG6010ELRX
SOD-123W1A 605mV@1A 60V 90nA@60V Independent SOD-123W Schottky Diodes ROHSNexperiaSchottky Diodes
README
README.mdraspberry_Pi_Pico_Prototype
Custom Raspberry Pi Pico-style development board designed in KiCad, featuring the RP2040/RP2350 microcontroller, USB connectivity, power management, GPIO headers, and custom PCB layout. The project covers schematic design, component selection, PCB layout, routing, and hardware validation.
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | Conn_01x01_Pin | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23, J24, J25 +17 |
| 6 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R9, R13, R14, R15 |
| 5 | TestPoint | TestPoint:TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 47u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5, C6, C7 |
| 4 | 4u7 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C12, C13 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C8 |
| 2 | 15p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R17 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 1 | 1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 200R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 3u3 | Inductor_SMD:L_01005_0402Metric | L2 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 5K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | Conn_01x03_Socket | Connector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_Horizontal | J2 |
| 1 | Crystal | Crystal:Crystal_AT310_D3.0mm_L10.0mm_Horizontal | Y3 |
| 1 | DMG1012T | Package_TO_SOT_SMD:SOT-523 | Q1 |
| 1 | L | Inductor_SMD:L_01005_0402Metric | L1 |
| 1 | LED | LED_THT:LED_D3.0mm | D2 |
| 1 | PMEG6010ELR | Diode_SMD:Nexperia_CFP3_SOD-123W | D1 |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | RP2350A | Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U1 |
| 1 | RT6150B-33GQW | RT6150B-33GQW:SON50P250X250X80-11N | U2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | USB_OTG | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J1 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
Questions
How big is the Raspberry pi pico PCB?
It measures 71.8 × 89.1 mm and has 4 copper layers, 1.4 mm thick.
What parts does the Raspberry pi pico use?
83 parts, built around the RP2350A, RT6150B-33GQW, W25Q32JVSSIQ and DMG1012T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Raspberry pi pico KiCad files?
From the Ons-Nouri/raspberry_Pi_Pico_Prototype repository on GitHub, at the commit this page was made from: the board is raspberry pi pico.kicad_pcb and its schematic raspberry pi pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Raspberry pi pico design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ons-Nouri before reusing the design.
Similar boards
- 2 layers53.7 × 21 mm
Pico 2 C
sabogalc/project-piCo
Because it should be a crime to release a product with Micro-USB in the 2020s
67 parts159WTFPL - 4 layers65 × 56 mm
Raspberry pi pico 2w
RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.
83 parts - 4 layers
- 2 layers24 × 51 mm
- 2 layers
Pcb custom simm-40-rp2040
shishir-dey/pcb-custom-simm-40-rp2040
Clone of the Raspberry Pi Pico board on a custom SIMM (single in-line memory module) footprint with 40 pins. Made with KiCad
43 parts2MIT - 4 layers21 × 51 mm
Rasberry pi pico
Roshan-khatri78/Electronics-Projects-KiCad-
A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design.
51 parts2 - 2 layers54 × 87 mm
Dalmierz
SzymonGogulski/KICAD_SEE_ELECTRICAL_PROJECTS_PUEIE
University projects related to PCB design and electrical diagram design. 7th semester - course "Design of Electrical and Electronic Systems".
52 parts